 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PIN Photodiodes PNZ322D (PN322D) Dual Division Silicon PIN Photodiode Unit : mm For optical information systems 1.00.1 5.00.1 2.540.1 4 3 1.80.3 0.80.2 0.60.1 Features Fast response : tr, tf = 10 ns (typ.) Good photo current linearity Low dark current : ID = 10 nA (max.) Small plastic package and visible light cutoff resin (flat type) 13.51.0 4.00.1 1.00.3 1.00.3 AB 5 4-0.6 +0.1 -0.2 1.00.1 5 4-0.50.15 1 10 0.2 +0.1 -0.05 Applications Auto focus sensor for still cameras and video cameras etc. Distance measuring systems Position sensor for automatic assembly lines Eye sensor for industrial robots 2 10 5 5 1: Anode A 2: Common cathode 3: Anode B 4: Common cathode Absolute Maximum Ratings (Ta = 25C) Parameter Reverse voltage (DC) Power dissipation Operating ambient temperature Storage temperature Symbol VR PD Topr Tstg Ratings 30 30 -25 to +85 -30 to +100 Unit V mW C C Note) The PNZ0322 package consists of a visible light cutoff resin. Therefore the chips (A and B) shown in the drawing cannot actually be seen. Dimensions of detection area 1.9 0.55 0.55 0.04 Unit : mm 1.26 1.0 A B Electro-Optical Characteristics (Ta = 25C) Parameter Reverse voltage (DC) Dark current Photo current Peak sensitivity wavelength Response time Capacitance between pins Acceptance half angle Symbol VR ID IL*3 P tr, tf *2 Conditions IR = 10A VR = 10V VR = 10V, L = 1000 lx*1 VR = 10V VR = 10V, RL = 1k VR = 10V, f = 1MHz Measured from the optical axis to the half power point min 30 typ max 10 Unit V nA A nm ns pF deg. 3 5 940 10 3 65 Ct Note) The indicated values for absolute maximum ratings and electro-optical characteristics are the values corresponding to individual elements. *1 White tungsten lamp light source (color temperature T = 2856K) *2 Semiconductor laser light source ( = 800nm) *3 Photo current measurement circuit +10V R1 = R2 R1 R2 ;; ;; ; Note) The part number in the parenthesis shows conventional part number. 1 PNZ322D PIN Photodiodes PD -- Ta 40 10 2 VR = 10V Ta = 25C T = 2856K IL -- L 160 140 IL -- Ta VR = 10V L = 1000 lx T = 2856K PD (mW) IL (A) 30 10 IL (%) Relative photo current 10 2 10 3 10 4 120 100 80 60 40 20 Power dissipation Photo current 20 1 10 10 -1 0 - 30 0 20 40 60 80 100 10 -2 10 0 - 40 - 20 0 20 40 60 80 100 Ambient temperature Ta (C ) Illuminance L (lx) Ambient temperature Ta (C ) ID -- V R 1 Ta = 25C 1 VR = 10V ID -- Ta 100 Spectral sensitivity characteristics VR = 10V Ta = 25C ID (nA) 10 -1 ID (nA) 10 -1 S (%) Relative sensitivity 80 60 Dark current Dark current 40 10 -2 10 -2 20 10 -3 0 4 8 12 16 20 24 28 32 10 -3 - 40 - 20 0 20 40 60 80 100 0 600 700 800 900 1000 1100 1200 Reverse voltage VR (V) Ambient temperature Ta (C ) Wavelength (nm) Directivity characteristics 100 10 2 Ct -- VR f = 1MHz Ta = 25C 10 4 Sig.IN tr , tf -- RL VR = 10V Sig. OUT RL 90% 10% Ct (pF) S (%) 80 ;; ; tr , tf (ns) 10 3 50 10 tr td tf Relative sensitivity 1 Rise time, Fall time 60 Capacitance between pins 10 2 40 10 -1 10 20 0 80 40 0 40 80 10 -2 10 -1 1 10 10 2 1 10 -1 Ta = 25C 1 10 10 2 Angle (deg.) Reverse voltage VR (V) External load resistance RL (k) 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of PNZ322D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |