View DS2103SY_349005.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DS2103SY
DS2103SY
Rectifier Diode
Replaces October 2001 version, DS4172-5.0 DS4172-5.1 December 2001
FEATURES
s Double Side Cooling s High Surge Capability
KEY PARAMETERS VRRM 2600V IF(AV) 5788A IFSM 81000A
APPLICATIONS
s Rectification s Freewheel Diode s DC Motor Control s Power Supplies s Welding s Battery Chargers
VOLTAGE RATINGS
Type Number Repetitive Peak Reverse Voltage VRRM V Conditions
DS2103SY26 2600 DS2103SY25 2500 DS2103SY24 2400 DS2103SY23 2300 DS2103SY22 2200 DS2103SY21 2100 Lower voltage grades available.
VRSM = VRRM + 100V Outline type code: F See Package Details for further information. Fig. 1 Package outline
ORDERING INFORMATION
When ordering, select the required part number shown in the Voltage Ratings selection table, e.g.: DS2103SY22 Note: Please use the complete part number when ordering and quote this number in any future correspondance relating to your order.
1/7
www.dynexsemi.com
DS2103SY
CURRENT RATINGS
Tcase = 75oC unless otherwise stated Symbol Double Side Cooled IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load 5788 9076 8278 A A A Parameter Conditions Max. Units
Single Side Cooled (Anode side) IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load 3751 5892 4955 A A A
Tcase = 100oC unless otherwise stated Symbol Double Side Cooled IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Tcase = 100oC Half wave resistive load 4785 7516 6725 A A A Parameter Conditions Max. Units
Single Side Cooled (Anode side) IF(AV) IF(RMS) IF Mean forward current RMS value Continuous (direct) forward current Half wave resistive load 3060 4807 3950 A A A
2/7
www.dynexsemi.com
DS2103SY
SURGE RATINGS
Symbol IFSM I2t IFSM I2t Parameter Surge (non-repetitive) forward current I2t for fusing Surge (non-repetitive) forward current I2t for fusing Conditions 10ms half sine; Tcase = 175oC VR = 50% VRRM - 1/4 sine 10ms half sine; Tcase =175oC VR = 0 Max. 65.0 21.1 x 106 81.0 33 x 106 Units kA A2s kA A2s
THERMAL AND MECHANICAL DATA
Symbol Parameter Conditions Double side cooled Rth(j-c) Thermal resistance - junction to case Single side cooled Cathode dc Clamping force 43.0kN with mounting compound Forward (conducting) Tvj Virtual junction temperature Reverse (blocking) Tstg Storage temperature range Clamping force -55 38.0 175 175 47.0
o
Min. dc Anode dc -
Max. 0.0095 0.019 0.019 0.002 0.004 200
Units
o
C/W
o
C/W C/W C/W C/W
o
o
Double side Single side
o
Rth(c-h)
Thermal resistance - case to heatsink
o
C
C C
o
kN
3/7
www.dynexsemi.com
DS2103SY
CHARACTERISTICS
Symbol VFM IRM QS Irr VTO rT Parameter Forward voltage Peak reverse current Total stored charge Peak reverse recovery current Threshold voltage Slope resistance Conditions At 3000A peak, Tcase = 25oC At VRRM, Tcase = 175oC IF = 2000A, dIRR/dt = 3A/s Tcase = 175C, VR = 100V At Tvj = 175C At Tvj = 175C Min. Max. 1.05 150 3000 125 0.75 0.063 Units V mA C A V m
CURVES
10000 Measured under pulse conditions Tj = 175C
10000 12000
8000
Instantaneous forward current, IF - (A)
Mean power dissipation - (W)
8000
6000
6000
4000
4000
2000
2000 dc Half wave 3 phase 6 phase 2000 4000 6000 8000 Mean forward current, IF(AV) - (A) 10000
0 0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0 0
Instantaneous forward voltage, VF - (V)
Fig.2 Maximum (limit) forward characteristics VFM Equation:VFM = A + Bln (IF) + C.IF+D.IF Where
Fig.3 Dissipation curves A = -0.51826 B = 0.195881 C = 6.39 x 10-5 D = -0.00544 these values are valid for Tj = 125C for IF 500A to 9000A
4/7
www.dynexsemi.com
DS2103SY
100000
1000
IF QS dIF/dt
140 I2t = I2 x t 2 120
Peak half sine forward current - (kA)
Conditions: Tj = 175C VR = 100V IF = 2000A Reverse recovery current, Irr - (A)
25
IRM
Stored charge QS - (C)
100
20
I2t value - (A2s x 106)
Max. Irr
10000 Max. QS
100
80
I2t
15
60
10
40
5
1000 0.1
10 1.0 10 100 Rate of decay of forward current, dI/dt - (A/s)
20 1 ms
10
1
23
5
10
20
0 50
Fig.4 Total stored charge and maximum reverse recovery current
0.1
Cycles at 50Hz Duration
Fig.5 Surge (non-repetitive) forward current vs time (with 50% VRRM at Tcase 175C)
Anode side cooled
Thermal impedance - (C/W)
0.01 Double side cooled
0.001
Conduction
Effective thermal resistance Junction to case C/W Double side 0.0095 0.0105 0.0112 0.0139 Single side 0.019 0.020 0.0207 0.0234
d.c. Halfwave 3 phase 120 6 phase 60
0.0001 0.001
0.01
0.1 1 Time - (s)
10
100
Fig.6 Maximum (limit) transient thermal impedance junction to case 5/7
www.dynexsemi.com
DS2103SY
PACKAGE DETAILS
For further package information, please contact your nearest Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE.
Hole O3.6 x 2.0 deep (One in each electrode)
Cathode O112.5 max O73 nom
O73 nom
Anode
Nominal weight: 1600g Clamping force: 50kN 10%
Package outine type code: Y
Note: 1. Package maybe supplied with pins and/or tags.
6/7
37.7 36.0
www.dynexsemi.com
DS2103SY
POWER ASSEMBLY CAPABILITY
The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete solution (PACs).
DEVICE CLAMPS
Disc devices require the correct clamping force to ensure their safe operation. The PACs range offers a varied selection of pre-loaded clamps to suit all of our manufactured devices. This include cube clamps for single side cooling of `T' 22mm Clamps are available for single or double side cooling, with high insulation versions for high voltage assemblies. Please refer to our application note on device clamping, AN4839
HEATSINKS
Power Assembly has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or Customer Services.
http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com
HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC. 99 Bank Street, Suite 410, Ottawa, Ontario, Canada, K1P 6B9 Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) CUSTOMER SERVICE CENTRES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) / Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. (c) Dynex Semiconductor 2001 Publication No. DS4172-5 Issue No. 5.1 December 2001 TECHNICAL DOCUMENTATION - NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
7/7
www.dynexsemi.com

▲Up To Search▲

Price & Availability of DS2103SY

	To Download DS2103SY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .