 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PMM0204 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Very low TC and tight tolerances Excellent stability at different environmental conditions Force fitted steel caps, tin plated on nickel barrier STANDARD ELECTRICAL SPECIFICATIONS MODEL PMM0204 PMM0204 PMM0204 PMM0204 PMM0204 1) POWER RATING P70C1) W 0.125 0.125 0.125 0.125 0.125 LIMITING ELEMENT VOLTAGE MAX2) V 100 100 100 100 100 TEMPERATURE COEFFICIENT ppm/K 5 10 15 25 50 TOLERANCE % 0.1, 0.25 0.1, 0.25 0.1, 0.25 0.1, 0.25 0.1, 0.25 RESISTANCE RANGE W 100R - 100K 100R - 221K 100R - 221K 100R - 221K 100R - 221K E-SERIES 96 - 192 96 - 192 96 - 192 96 - 192 96 - 192 Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material Rated voltage: PxR TC 10ppm/C: temperature range is - 10C to + 85C * Coating: green * Without TC-band * Marking :see appropriate catalog or web page 2) * TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70C Limiting Element Voltage2) Insulation Voltage (1 min) Thermal Resistance3) Insulation Resistance Category Temperature Range Failure Rate Weight / 1000pcs 2) 3) UNIT W V V dc/ac peak K/W W C 10 -9 /h g PxR PMM0204 0.125 100 200 220 10 10 - 10 / + 100 <1 18 Rated voltage: Based on measurements on test board acc. to EN 140000 PACKAGING: see SMM0204 ORDERING INFORMATION PMM0204 MODEL 25 TC ppm / K 562R RESISTANCE VALUE W 0.1% TOLERANCE % B1 PACKAGING B1-Blistertape 1000 pcs Document Number: 20006 Revision: 20-Oct-03 For Technical questions contact: ff1aresistors@vishay.com www.vishay.com 1 PMM0204 Vishay Draloric DIMENSIONS MODEL PMM0204 DIMENSIONS [in millimeters] Dmax 1.4 d* D -0.15 L 3.6 - 0.15 Amax 0.85 Amin 0.5 Metal Film Cylindrical Resistors *d measured in the middle of the resistor SOLDER PAD DIMENSIONS [in millimeters] MODEL PMM0204 REFLOW SOLDERING WAVE SOLDERING a 1.0 b 1.6 l 2.2 a 1.2 b 1.6 l 2.2 Current Noise in mV/V Rated Power in % 3 2 1 0.5 0.3 120 100 80 60 0.1 40 0.05 0.03 20 0.01 0 1K Current Noise 5K 10K 50K 100K 500K 1M -55 Current Noise -25 0 25 50 Resistance Value in W 75 100 70 Ambient Temperature in C PERFORMANCE TEST Endurance Test at 70C IEC 60115-1 4.25.1 Endurance at UCT IEC 60115-1 4.25.3 Overload Test IEC 60115-1 4.13 Thermal Shock IEC 60115-1 4.19 IEC 60068-2-14 Damp Heat Steady State IEC 60115-1 4.24 IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18 IEC 60068-2-20 CONDITIONS OF TEST 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 1000 hours at 125C without load Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage Rapid change between upper and lower category temperature 56 days at 40C and 93% relative humidity 10 seconds at 260C solder bath temperature TEST RESULTS 0.1% 0.1% 0.02% 0.02% 0.2% 0.05% APPLICABLE SPECIFICATIONS * CECC40000 / 40400 / 40401-803 * EN140400 / IEC 60115 - 1 www.vishay.com 2 For Technical questions contact: ff1aresistors@vishay.com Document Number: 20006 Revision: 20-Oct-03 |
Price & Availability of PMM020425562R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |