View HSD141PK11-A_395207.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

( DataSheet : www..com )
HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 1 / 1.0
TO
:
Date :
HannStar Product Specification Preliminary
Model : HSD141PK11 -A
Note:1.Please contact HannStar Display Corp. before designing your product based on this module specification. 2.The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.

www..com
HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 2 / 1.0
Record of Revisions
Rev. Date Description of change
!
1.0
Mar.08, 2001
HSD141PK11-A specification was first
issued.
I

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 3 / 1.0
Contents
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 General descriptions ........................................ ................................ p.4 p.5 p.6 p.11 p.13 p.14 p.21 p.26 p.28 p.29 p.31
Absolute maximum ratings Optical characteristics Electrical characteristics Block diagram
...................................... ...................................
................................................ ...................................
Interface pin connection Interface timing
.............................................. ...........................................
Outline dimension Lot mark
....................................................... .........................................
General precaution
Visual inspection specification ...........................

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 4 / 1.0
1.0 GENERAL DESCRIPTION
1.1 Introduction HannStar Display model HSD141PK11-A is a color active matrix thin film transistor (TFT) liquid crystal display(LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 14.1 inch diagonally measured active display area with SXGA+ resolution (1050 vertical by 1400 horizontal pixel array) and can display up to 262,144 colors. 1.2 Features 14.1 SXGA+ for Notebook PC LVDS interface system
1.3 Applications Notebook PC Moniputers Display terminals for AV applications Monitors for industrial applications 1.4 General information Item Display area Number of Pixel Pixel pitch Pixel arrangement Display color Display mode Surface treatment Weight Back-light Input signal Optimum viewing direction 1400(H) x 1050(V) 0.204(H) x 0.204(V) RGB Vertical stripe 262,144 Normally white Antiglare, Hard-Coating(3H) 540 Single CCFL (Sidelight type) 2-ch LVDS 6 o'clock g colors
Specification 285.6(H) x 214.2(V)
Unit mm pixels mm

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 5 / 1.0
1.5 Mechanical Information Item Horizontal(H) Module Vertical(V) Size Depth(D) Weight (Without inverter) Min. 298.0 226.0 ----Typ. 298.5 226.5 5.8 540 Max. 299.0 227.0 6.1 TBD Unit Mm Mm Mm G
2.0 ABSOLUTE MAXIMUM RATING 2.1 Absolute Rating of Environment
Item Symbol Min. Max. Unit
o
Note
Storage temperature TSTG -20 65 C o Operating temperature TOPR 0 50 C Vibration(non-operating) VNOP -1.5 G Shock(non-operating) SNOP -210 G Storage humidity HSTG 10 80 %RH Operating humidity HOP 10 80 %RH Low pressure(operating) PLOP 697 -hPa Low pressure(non-operating) PLNOP 116 -hPa Note (1) 10-500-10Hz sweep/cycle, X,Y,Z each directions, 0.5hr each (2) 3ms, X, Y, Z direction, one time each. For this shock test, it is necessary to fill the silicon rubber between the shock jig as buffer. (3) Max wet bulb temp.=39oC (4) 2hrs. (10000 feet) (5) 24hrs. (50000 feet)
(1) (2) (3) (3) (4) (5)
2.2 Electrical Absolute Rating 2.2.1 TFT LCD Module
Item Power supply voltage Logic input voltage 2.2.2 Back-Light Unit Symbol VFL IL fL Min. 0 -0 Max. 2000 7.0 100 Unit V(rms) mA kHz Note (1) (1) (1) Symbol VDD VIN Min. -0.3 -0.3 Max. 4.0 VDD+0.3 Unit V V Note (1) (1)
Item Lamp voltage Lamp current Lamp frequency

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 6 / 1.0
Note
(1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normally operating conditions.
3.0 OPTICAL CHARACTERISTICS 3.1 Optical specification
Item Contrast Response time Rising Falling Symbol Condition CR TR TF YL Rx Ry Gx Gy Bx By Wx Wy L R U D BUNI =0 CR>10 =0 =0 Normal viewing angle Min. (0.580) (0.307) (0.298) (0.527) (0.119) (0.096) (0.299) (0.305) ----70 Typ. 250 15 35 150 (0.610) (0.337) (0.328) (0.557) (0.149) (0.126) (0.329) (0.335) (40) (40) (20) (30) Max. (0.640) (0.367) (0.358) (0.587) (0.179) (0.156) (0.359) (0.365) 1.3 % % (6) (7) (1)(4) msec cd/m2 Unit Note (1)(2) (1)(3) (1)(4)(5)
(IL=6.0mA)
White luminance (Average of 5 points) Red
Color chromaticity (CIE1931)
Green
Blue
White
Hor. Viewing angle Ver. Brightness uniformity
=0 Crosstalk CT(n) -3.2 Measuring Condition Measuring surrounding : dark room Lamp current IFL : 6.00.1mA(rms), Inverter : HIU-757 VDD=3.3V0.05V Surrounding temperature : 252oC 30min. warm-up time.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 7 / 1.0
3.3 Measuring Equipment LCD-7000 of Otsuka Electrics Corp., which utilized MCPD-7000 for Chromaticity and BM-7 for other optical characteristics. Measuring spot size : 2X500Xtan1 o Note (1) Definition of Viewing Angle :
U 12' o'clock =90o
L =180o D
R =0o
6' o'clock =270o
Note (2) Definition of Contrast Ratio(CR) : measured at the center point of panel
Luminance with all pixels white (L63) CR = Luminance with all pixels black (L0)

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 8 / 1.0
Note (3) Definition of Response Time : Sum of TR and TF

Optical response

time
Note (4) Definition of brightness uniformity
Photo-detector (BM-5A)
Field=2 o
50cm
LCD panel
Center of panel

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 9 / 1.0
Note (5) Definition of Average Luminance of White (5 Point)
Y1+Y2+Y3+Y4+Y5 Average Luminance
5

Note (6) Definition of brightness uniformity
(Min Luminance of 13 points) Luminance uniformity (Max Luminance of 13 points)

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 10 / 1.0
Note (7) Definition of crosstalk L(n) - LB(n) CT(n) = L(n)
CT(1) ~ CT(4)
x 100% , n = 1 ~ 4
Where L(n) = Luminance of point "n" at pattern A (cd/m2) , n=14 LB(n) = Luminance of point "n" at pattern B (cd/m2) , n=14 The location measured will be exactly the same in both patterns. L0 : Luminance with all pixels black L63 : Luminance with all pixels white

!'"#$
!"#$
!"&$ !"$

!'"&$ !'"$
!"%$

!'"%$

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 11 / 1.0
4.0 ELECTRICAL CHARACTERISTICS
4.1 TFT LCD Module Item Voltage of power supply High Input voitage Low Current of power Mosaic supply Vsync frequency Hsync frequency Main frequency Note (1) Mosaic : Dot checker image Symbol VDD VIH VIL IDD fV fH fDCLK Min. 3.0 2.4 0 ----Typ. 3.3 --TBD (550) 60.00 63.98 54.00 Max. 3.6 3.6 0.9 -60.00 -54.00 Unit V V V mA Hz KHz MHz Note
(1) (2)

Grey scale: L0L63. L0: Luminance with all pixels black. L63: Luminance with all pixels white.
Note (2) When fv is too low, a flicker may be occurred on the display.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 12 / 1.0
4.2 Back-Light Unit The back-light system is an edge-lighting type with 1 CCFL(Cold Cathode Fluorescent Lamp). The characteristics of the lamp1 is shown in the following tables. Item Lamp current Lamp voltage Frequency Operating life time Symbol IL VL fL Hr Min. 5.5 540 40 10,000 Typ. 6.0 600 (51) 15,000 Max. 6.5 660 60 Unit mA(rms) V(rms) KHz Note (1) IL=6.0mA (2)
-Hour (3) 700 at 25oC Startup voltage Vs --V(rms) 910 at 0oC Note (1) Lamp current is measured with current meter for high frequency as shown below. Specified valued are for a lamp.
!"#$"% &

# %
INVERTER '(%
)
Note (2) Lamp frequency may produce interference with horizontal synchronous frequency and this may cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. Note (3) Life time (Hr) can be defined as the time in which it continues to operate under the condition : Ta=253oC, IL=6.0mA(rms) and fL=51kHz until one of the following event occurs : 1. When the brightness becomes 50% 2. When the startup voltage(Vs) at 0oC becomes higher than the maximal Value of Vs specified above.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 13 / 1.0
5.0 BLOCK DIAGRAM
5.1 TFT LCD Module X-driver IC Timing Connector Controller + DC/DC Converter LVDS Receiver Y-driver IC Liquid Crystal Panel 1400 1050 pixels
Gray scale Manipulation Voltage Generation Circuit
5.2
Back Light Unit

VL GL

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 14 / 1.0
6.0 INTERFACE PIN CONNECTION
6.1 TFT LCD Module
CN11) INPUT SIGNAL (FI-XB30SR-HF11A/JAPAN AVIATION ELECTRONICS INDUSTRY,LTD.)1) MATING CONNECTOR: FI-X30M,FI-X30MR
Terminal no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Symbol GND GND VDD VDD NC NC NC NC EIN0EIN0+ GND EIN1EIN1+ GND EIN2EIN2+ GND ECLKECLK+ GND OIN0OIN0+ GND OIN1OIN1+ GND OIN2OIN2+ GND OCLKOCLK+ GND Function Ground Ground Power Supply : +3.3V Power Supply : +3.3V NC Reserved for supplier test point NC NC EVEN Transmission Data of Pixels 0 (Negative : -) EVEN Transmission Data of Pixels 0 (Positive : +) Ground EVEN Transmission Data of Pixels 1 (Negative : -) EVEN Transmission Data of Pixels 1 (Positive : +) Ground EVEN Transmission Data of Pixels 2 (Negative : -) EVEN Transmission Data of Pixels 2 (Positive : +) Ground EVEN Sample Clock (Negative : -) EVEN Sample Clock (Positive : +) Ground ODD Transmission Data of Pixels 0 (Negative : -) ODD Transmission Data of Pixels 0 (Positive : +) Ground ODD Transmission Data of Pixels 1 (Negative : -) ODD Transmission Data of Pixels 1 (Positive : +) Ground ODD Transmission Data of Pixels 2 (Negative : -) ODD Transmission Data of Pixels 2 (Positive : +) Ground ODD Sample Clock (Negative : -) ODD Sample Clock (Positive : +) Ground
Note 1) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input. (NC pin should be open.)
6.2 Back-Light Unit
CN2 CCFL Power Source (BHTR-02VS-1) / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Mating Connector : (SM02B-BHSS-1) / JAPAN SOLDERLESS TERMINAL MFG CO., LTD.
*+,-.
/+0-
12,- !!1 3-4233'5,657-6) !!1 3-4233'-47-6)

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 15 / 1.0
6.3
Relationship Between Displayed Color and Input
Display Black Blue Green Light Blue Red Purple Yellow White Black MSB LSB R5 R4 R3 R2 R1 R0 L L L L L L L L L L L L L L L L L L L L L L L L H H H H H H H H H H H H H H H H H H H H H H H H L L L L L L L L L L L H L L L L H L : : Light H H H L L L H H H L L L H H H L L L : : Light L L L L L L L L L L L L L L L L L L : : Light L L L L L L L L L L L L L L L L L L : : Light H H H H H H H H H H H H L H H HH LH HH H H H H H H H H H L H H HH LH HH H H H H H H H H H L H H H L61 L L62 H White L63 L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L H L L L L H L H H H L L L H H H L L L H H H L L L : : H H H L L L L H H L L H H L H L H L L61 L62 Blue L63 L0 L1 L2 L3...L60 L L L L L L L L L L L L L L L L L L H H H L L L H H H L L L H H H L L L : : H H H L L L L H H L L L H L H L L L L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L H L L61 L L62 L Green L63 L L0 H L1 L L2 L3...L60 H H H L L L L H H L L L H L H L L L L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L L L L L L L L L61 L62 Red L63 L0 L1 L2 L3...L60 MSB G5 G4 L L L L H H H H L L L L H H H H L L L L L L G3 L L H H L L H H L L L : : LSB MSB LSB Gray scale G2G1 G0 B5 B4 B3 B2 B1 B0 level L L LL L L L L L L L LH H H H H H H H HL L L L L L H H HH H H H H H L L LL L L L L L L L LH H H H H H H H HL L L L L L H H HH H H H H H L L LL L L L L L L0 L L LL L L L L L L1 L L LL L L L L L L2 : : L3...L60
Basic color
Gray scale of Red
Dark
Red Black
Gray scale of Green
Dark
Green Black
Gray scale of Blue
Dark
Blue Black
Gray scale of White & Black
Dark
White

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 16 / 1.0
6.4 Pixel Format

!* !# !% ! !& !+
()'()'()'()'()'()' ()'()'()'()'()' ()' ()'()'()'()' ()'()' ()'()'()'()'()'()' ()'()'()'()'()'()' ()'()'()'()'()'()'
()' ()' ()' ()' ()' ()'

,8 ( ) '

,
( ) ' ( ) ' ( ) ' ( ) ' ( ) ' ( )'
()'
,8
Note : The first pixel is Even pixel.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 17 / 1.0
6.5 RECOMMENDED TRANSMITTER TO HSD141PK11-A INTERFACE ASSIGNMENT Case1: EVEN DATA (6bit transmitter)
Input terminal no. Symbol T1IN0/TA0 T1IN1/TA1 T1IN2/TA2 T1IN3/TA3 T1IN4/TA4 T1IN5/TA5 T1IN6/TA6 T1IN7/TB0 T1IN8/TB1 T1IN9/TB2 T1IN10/TB3 T1IN11/TB4 T1IN12/TB5 T1IN13/TB6 T1IN14/TC0 T1IN15/TC1 T1IN16/TC2 T1IN17/TC3 T1IN18/TC4 T1IN19/TC5 T1IN20/TC6 T1CLK IN /CLKIN THC63LVDM63A Input signal (Graphics controller output signal) Function RED Pixels Display Data (LSB) RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data (MSB) GREEN Pixels Display Data (LSB) GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data (MSB) BLUE Pixels Display Data (LSB) BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data (MSB) H-Sync V-Sync Data Enable Signal Data Sampling Clock Output signal Symbol HSD141PK11-A interface(CN1) Terminal Symbol
Termina Symbol l 44 RE0 45 RE1 47 RE2 48 RE3 1 RE4 3 RE5 4 GE0 6 GE1 7 GE2 9 GE3 10 GE4 12 GE5 13 BE0 15 BE1 16 BE2 18 BE3 19 BE4 20 BE5 22 HSYNC 23 VSYNC 25 DE 26 NCLK
T1OUT0T1OUT0+
No. 9 No. 10
EIN0EIN0+
T1OUT1T1OUT1+
No. 12 No. 13
EIN1EIN1+
T1OUT2T1OUT2+
No. 15 No. 16
EIN2EIN2+
T1CLK OUTT1CLK OUT+
No. 18 No. 19
ECLK ECLK +
Note : Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
,-*

),*

(,+

(,&

(,

(,%

(,#

(,*
,-#

',#

',*

),+

),&

),

),%

),#
,-%

,

.- .- ',+

',&

',

',%

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 18 / 1.0
Case2: ODD DATA(6bit transmitter)
Input terminal no. Symbol T2IN0/TA0 T2IN1/TA1 T2IN2/TA2 T2IN3/TA3 T2IN4/TA4 T2IN5/TA5 T2IN6/TA6 T2IN7/TB0 T2IN8/TB1 T2IN9/TB2 T2IN10/TB3 T2IN11/TB4 T2IN12/TB5 T2IN13/TB6 T2IN14/TC0 T2IN15/TC1 T2IN16/TC2 T2IN17/TC3 T2IN18/TC4 T2IN19/TC5 T2IN20/TC6 T1CLK IN /CLKIN THC63LVDM63A Input signal (Graphics controller output signal) Function RED Pixels Display Data (LSB) RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data (MSB) GREEN Pixels Display Data (LSB) GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data (MSB) BLUE Pixels Display Data (LSB) BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data (MSB) Non Connection(open) Non Connection(open) Non Connection(open) Data Sampling Clock Output signal Symbol HSD141PK11-A interface(CN1) Terminal Symbol
Termina Symbol l 44 RO0 45 RO1 47 RO2 48 RO3 1 RO4 3 RO5 4 GO0 6 GO1 7 GO2 9 GO3 10 GO4 12 GO5 13 BO0 15 BO1 16 BO2 18 BO3 19 BO4 20 BO5 22 NC 23 NC 25 NC 26 NCLK
T2OUT0T2OUT0+
No. 21 No. 22
OIN0OIN0+
T2OUT1T2OUT1+
No. 24 No. 25
OIN1OIN1+
T2OUT2T2OUT2+
No. 27 No. 28
OIN2OIN2+
T2CLK OUTT2CLK OUT+
No. 30 No. 31
OCLK OCLK+
Note : Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
/-* /-#

)/*

(/+

(/&
(/

(/%

(/#

(/*

'/#

'/*

)/+

)/&
)/

)/%

)/#
/-%

,

.- .-

'/+

'/&

'/

'/%

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 19 / 1.0
Case1 : EVEN DATA (8bit transmitter)
THC63LVDM83A Input signal Input terminal no. (Graphics control output signal) Symbol Terminal Symbol Function T1IN0/TA0 51 RE0 RED Pixels Display Data (LSB) T1IN1/TA1 52 RE1 RED Pixels Display Data T1IN2/TA2 54 RE2 RED Pixels Display Data T1IN3/TA3 55 RE3 RED Pixels Display Data T1IN4/TA4 56 RE4 RED Pixels Display Data T1IN5/TA5 3 RE5 RED Pixels Display Data (MSB) T1IN6/TA6 4 GE0 GREEN Pixels Display Data (LSB) T1IN7/TB0 6 GE1 GREEN Pixels Display Data T1IN8/TB1 7 GE2 GREEN Pixels Display Data T1IN9/TB2 11 GE3 GREEN Pixels Display Data T1IN10/TB3 12 GE4 GREEN Pixels Display Data T1IN11/TB4 14 GE5 GREEN Pixels Display Data (MSB) T1IN12/TB5 15 BE0 BLUE Pixels Display Data (LSB) T1IN13/TB6 19 BE1 BLUE Pixels Display Data T1IN14/TC0 20 BE2 BLUE Pixels Display Data T1IN15/TC1 22 BE3 BLUE Pixels Display Data T1IN16/TC2 23 BE4 BLUE Pixels Display Data T1IN17/TC3 24 BE5 BLUE Pixels Display Data (MSB) T1IN18/TC4 27 HSYNC H-Sync T1IN19/TC5 28 VSYNC V-Sync T1IN20/TC6 30 DE Data Enable Signal T1IN21/TD0 50 NC Non Connection (open) T1IN22/TD1 2 NC Non Connection (open) T1IN23/TD2 8 NC Non Connection (open) T1IN24/TD3 10 NC Non Connection (open) T1IN25/TD4 16 NC Non Connection (open) T1IN26/TD5 18 NC Non Connection (open) T1IN27/TD6 25 NC Non Connection (open) T1CLK IN 31 NCLK DATA SAMPLING CLOCK /CLKIN

Output signal Symbol
To HSD141PX11-A
interface(CN1) Terminal Symbol
T1OUT0T1OUT0+
No. 9 No. 10
EIN0EIN0+
T1OUT1T1OUT1+
NO.12 NO.13
EIN1EIN1+
T1OUT2T1OUT2+
NO.15 NO.16
EIN2EIN2+
T1OUT3T1OUT3+
NC NC
NC NC
T1CLK OUT- NO. 18 T1CLK OUT+ NO. 19

ECLK ECLK +
Note : Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
,-* ,-# ,-% ,- ),* ',# , (,+ (,& (, (,% )' (,# (,*

',*
),+

),&

.- .

-
-
-
+ -
',
',& -

),% ', -
),# ',% -

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 20 / 1.0
Case2 : ODD DATA (8bit transmitter)
Input terminal no. Symbol T2IN0/TA0 T2IN1/TA1 T2IN2/TA2 T2IN3/TA3 T2IN4/TA4 T2IN5/TA5 T2IN6/TA6 T2IN7/TB0 T2IN8/TB1 T2IN9/TB2 T2N10/TB3 T2IN11/TB4 T2IN12/TB5 T2IN13/TB6 T2IN14/TC0 T2IN15/TC1 T2IN16/TC2 T2IN17/TC3 T2IN18/TC4 T2IN19/TC5 T2IN20/TC6 T2IN21/TD0 T2IN22/TD1 T2IN23/TD2 T2IN24/TD3 T2IN25/TD4 T2IN26/TD5 T2IN27/TD6 T2CLK IN /CLKIN Terminal Symbol 51 RO0 52 RO1 54 RO2 55 RO3 56 RO4 3 RO5 4 GO0 6 GO1 7 GO2 11 GO3 12 GO4 14 GO5 15 BO0 19 BO1 20 BO2 22 BO3 23 BO4 24 BO5 27 NC 28 NC 30 NC 50 NC 2 NC 8 NC 10 NC 16 NC 18 NC 25 NC 31 NCLK THC63LVDM83A Input signal (Graphics control output signal) Function RED Pixels Display Data (LSB) RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data RED Pixels Display Data (MSB) GREEN Pixels Display Data (LSB) GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data GREEN Pixels Display Data (MSB) BLUE Pixels Display Data (LSB) BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data BLUE Pixels Display Data (MSB) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) Non Connection (open) DATA SAMPLING CLOCK Output signal Symbol
To HSD141PX11-A
interface(CN1) Terminal Symbol
T2OUT0T2OUT0+
No. 21 No. 22
OIN0OIN0+
T2OUT1T2OUT1+
NO.24 NO.25
OIN1OIN1+
T2OUT2T2OUT2+
NO.27 NO.28
OIN2OIN2+
T2OUT3T2OUT3+
NC NC

T2CLK OUT- NO. 30 T2CLK OUT+ NO. 31
OCLK OCLK +
Note : Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
/-* /-# /-% /-

)/* '/# -
(/+
(/&
(/

'/* -

)/+ -

)/& '/+ -
%
(/
(/#
(/*
)/
)/% '/ -

)/# '/% -

-
-
-
& -
'/

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 21 / 1.0
7.0 INTERFACE TIMING 1)2)3)4)5)6)
7.1 Timing Parameters (Hsync, Vsync and DE mode)
Item Frame Period Vertical Display Term Vertical Blanking Term 1 Line Scanning Time Horizontal Display Term Horizontal Blanking Term Clock Period V-Sync Term V-Sync Pulse Width V-Sync Set up Time V-Sync Hold Time Vertical Front Porch Vertical Data Sync Period Horizontal Period H-Sync Pulse Width Horizontal Front Porch Horizontal Data Sync Period DE Pulse Width t3 = tvfp + tvds t4 = th Symbol t1 t2 t3 t4 t5 t6 t7 tv tvw tvsu tvhd tvfp tvds th thw thfp thds twde Min. 1060xt4 16.66 1050xt4 10xt4 802xt7 700xt7 102xt7 18.519 1060xt4 2xt4 8xt7 8xt7 2xt4 8xt4 804xt7 4xt7 4xt7 t6-thfp 700xt7 Typ. 1066xt4 16.66 1050xt4 16xt4 844xt7 15.63 700xt7 144xt7 18.519 1066xt4 844xt7 t6-thfp 700xt7 Max. 1066xt4 16.66 1050xt4 16xt4 844xt7 700xt7 144xt7 19.597 1066xt4 844xt7 t6-thfp 700xt7 unit ms ms us us us us ns ms us
Note 1) Refer to "2.4.3 Timing Chart" and LVDS(THC63LVDF84A) specifications by THine Electronic,Inc.. Note 2) If ENAB is fixed to "H" or "L" level for certain period while NCLK is supplied , the panel displays black with some flicker. Note 3) If NCLK is fixed to "H" or "L" level for certain period while ENAB is supplied , the panel may be damaged. Note 4) Please adjust LCD operating signal timing and FL driving frequency , to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving condition(especially driving frequency),even if the condition satisfies above timing specifications and recommended operating conditions shown in 3. Note 5) Do not make t1,t2,t3 and tvds fluctuate. If t1,t2,t3 and tvds are fluctuate, the panel displays black. Note 6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred. Note 7) NCLK count of each Horizontal Scanning Time should be always the same. V-Blanking period should be "n" X "Horizontal scanning Time" (n : integer). Frame period should be always the same.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 22 / 1.0
7.2 Timing Diagram of Interface Signal (Hsync, Vsync and DE mode) 7.2.1 Vertical Timing

7.2.2 Horizontal Timing

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 23 / 1.0
7.2.3 SYNC Timing

!

"# !$% !

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 24 / 1.0
a
b
1.65(V)
Duty(a,b)
5010%
t5 t6
9! :
t7
VIH(MIN) : 2.64 (V) VIL(MAX) : 0.66 (V)
t8
ENAB OR7-OR0 OG7-OG0 OB7-OB0 ER7-ER0 EG7-EG0 EB7-EB0
t9
VIH(MIN) : 2.64 (V) VIL(MAX) : 0.66 (V)
VALID DATA

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 25 / 1.0
7.3 Power ON/OFF Sequence
-4$ -4/233
* * *% # % #*0
-4$>>
* *% *%
,=/,6
#*0
&
/,6
2*0 2*0
;,65 '<-++==)
+ +*0
1 +*0
Power ON/OFF Sequence Item T1 T2 T3 T4 T5 T6 Min. 0 0 0 400 200 200 Typ. Max. 10 50 50 Unit msec msec msec sec msec msec Remark
Note (1) The supply voltage of the external system for the module input should be the same as the definition of VDD. (2) Apply the lamp volatge within the LCD operation range. When the back-light turns on before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white. (3) In case of VDD = off level, please keep the level of input signal on the low or keep a high impedance. (4) T4 should be measured after the module has been fully discharged between power off and on period. (5) Interface signal shall not be kept at high impedance when the power is on.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 26 / 1.0
8.0 OUTLINE DIMENSION
8.1 Front View Outline Dimension
Unit : mm

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 27 / 1.0
8.2 Tolerance of distance between active area and bezel opening
ab 0.9mm cd 0.9mm
!"
0
?-3,6
=
,7

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 28 / 1.0
9.0 LOT MARK
9.1 Lot Mark 10 11 12 13 14 15
code 1,2,3,4,5,6: HannStar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. Note (1) Production Year Year Mark 1999 9 2000 0 2001 1 2002 2 2003 3 2004 4 2005 5 2006 6 2007 7 2008 8
Note (2) Production Month Month Mark Jan. 1 Feb. Mar. 2 3 Apr. 4 May. Jun. 5 6 Jul. 7 Aug. Sep. 8 9 Oct A Nov. Dec. B C
9.2 Location of Lot Mark (1) The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice.
0
141PK11
HSD141PK11 -A
Lot mark

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 29 / 1.0
10.0 GENERAL PRECAUTION
10.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2 Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module. 10.3 Breakage of LCD Panel 10.3.1 If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 10.3.2 If liquid crystal contacts mouth or eyes, rinse out with water immediately. 10.3.3 If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 10.3.4 Handle carefully with chips of glass that may cause injury, when the glass is broken. 10.4 Electric Shock 10.4.1 Disconnect power supply before handling LCD module. 10.4.2 Do not pull or fold the CCFL cable. 10.4.3 Do not touch the parts inside LCD modules and the fluorescent lamp's connector or cables in order to prevent electric shock. 10.5 Absolute Maximum Ratings and Power Protection Circuit 10.5.1 Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts' parameters, environmental temperature, etc., otherwise LCD module may be damaged. 10.5.2 Please do not leave LCD module in the environment of high humidity and high temperature for a long time. 10.5.3 It's recommended to employ protection circuit for power supply. 10.6 Operation 10.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead. 10.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly. 10.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 30 / 1.0
10.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 10.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 10.7 Mechanism Please mount LCD module by using mouting holes arranged in four corners tightly. 10.8 Static Electricity 10.8.1 Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence. 10.8.2 Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods. 10.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed. 10.10 Disposal When disposing LCD module, obey the local environmental regulations.

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 31 / 1.0
11.0 VISUAL INSPECTION SPECIFICATION
Inspection condition is as followings Viewing distance is approximately 15-50 cm Viewing angle is normal to the LCD panel Ambient temperature is in the room temperature Ambient illumination is 300~500 Lux . Defect type Visual defect
Dark/ Bright Spot Circular Foreign Material Bright or Dark Line
Criteria
0.2 mm D 0.5 mm N4 0.03 mm W 0.07 mm 0.3 mm L 2 mm N4 0.01 mm W 0.1mm 0.3 mm L 5 mm N3 Average D 0.35 mm N4 N7 N5 N2 N1 N5 N2 N=0 N8 15 mm 5 mm 10 mm
D: diameter N: number W: horizontal width L: vertical high
Foreign Material
Polarizer/ Linear Scratch
Polarizer- Bubble/ Peeling Maximum Allowable Defect Count All Types
Electrical defect
Bright Dot Random Bright Dot - Green Bright Dot- 2 Adjacent
N: number
Dark Dots- Random Dark Dots- 2 Adjacent Dark Dots- 3 or More Adjacent Total Bright and Dark Dots Minimum Distance Between Bright Dots Minimum Distance Between Dark Dots Minimum Distance Between Bright Dots and Dark Dots

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 32 / 1.0
Note(1)Bright dot defect description -Two adjacent
*3 *3
*3 *3
Type 3
Note(2)Dark dot defect description -Two adjacent
*3 *3 *3
*3 *3
Note(3)Dark dot defect description -Three adjacent
*3 *3 *3 *3

HannStar Display Corp.
Document Title Document No. HSD141PK11-A Specification(Formal) Page No. Revision 33 / 1.0
Note (4) Minimum distance between dot defects Bright dot to bright dot

++ 9
Dark dot to dark dot

++ 9
Note (5) "Average Diameter" description Dusts would be judged by "Average Diameter" under vertical high 0.1 mm and horizontal width 0.1mm condition.. Average Diameter (a+b)/2
0

▲Up To Search▲

Price & Availability of HSD141PK11-A

	To Download HSD141PK11-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .