View PNA3W01L_397998.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PIN Photodiodes
PNA3W01L (PN307)
PIN Photodiode
Unit : mm
For optical control systems
0.50.1
Features
High sensitivity, high reliability Peak sensitivity wavelength matched with infrared light emitting diodes : p = 800 nm (typ.)
1.050.1
Type number : Emitter mark (Yellow) 10.0 min. 10.0 min. 3.20.3 3.20.3 o1.8 2
1
2.20.15 (0.7) 0.15 (0.7)
45
1.8
2.80.2 1.8
Double end type small size package
R0.9
2.80.2
Absolute Maximum Ratings (Ta = 25C)
Parameter Reverse voltage (DC) Power dissipation Operating ambient temperature Storage temperature Symbol VR PD Topr Tstg Ratings 30 10 -25 to +85 -30 to +100 Unit V mW C C
0.85 0.15
1: Cathode 2: Anode
Electro-Optical Characteristics (Ta = 25C)
Parameter Dark current Photo current Peak sensitivity wavelength Acceptance half angle
*
Symbol ID IL P VR = 10V
Conditions VR = 10V, L = 1000 lx* VR = 10V Measured from the optical axis to the half power point
min 5
typ
max 50
Unit nA A nm deg.
800 24
Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source.
Note) The part number in the parenthesis shows conventional part number.
0.40.1
1
PIN Photodiodes
PNA3W01L
PD -- Ta
14 10 3 12 VR = 10V Ta = 25C T = 2856K
IL -- L
10 3 VR = 10V
ID -- Ta
PD (mW)
IL (A)
10 2
10 8 6 4 2 0 - 20
Power dissipation
10
Photo current
ID (nA) Dark current
1 10 10 2 10 3 10 4
10 2
10
1
1
10 -1
0
20
40
60
80
100
10 -2
10 -1 - 40 - 20
0
20
40
60
80
100
Ambient temperature Ta (C )
Illuminance L (lx)
Ambient temperature Ta (C )
IL -- Ta
160 VR = 10V L = 1000 lx T = 2856K 100
Spectral sensitivity characteristics
VCE = 10V Ta = 25C 100
Directional characteristics
Ta = 25C
IL (%)
120
Relative photo current
S (%)
S (%) Relative sensitivity
80
80
80
Relative sensitivity
60
60
40
40
40
20
20
0 - 40 - 20
0
20
40
60
80
100
0 200
400
600
800
1000
1200
0
80
40
0
40
80
Ambient temperature Ta (C )
Wavelength (nm)
Angle (deg.)
ID -- VR
10 Ta = 25C 10 2 Sig.IN
tr , tf -- RL
VR=10V Sig. OUT RL 90% 10%
tr , tf (s)
;;
10 50
ID (nA)
tr
td
tf
Rise time, Fall time
Dark current
1
1
10 -1
10 -1
0
8
16
24
32
10 -2 10 -1
1
10
10 2
Reverse voltage VR (V)
External load resistance RL (k)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of PNA3W01L

	To Download PNA3W01L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .