View PHT6NQ10T_401407.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
FEATURES
* 'Trench' technology * Low on-state resistance * Fast switching * Low thermal resistance
SYMBOL
d
QUICK REFERENCE DATA VDSS = 100 V ID = 6.5 A
g
RDS(ON) 90 m
s
GENERAL DESCRIPTION
N-channel enhancement mode field-effect transistor in a plastic envelope using 'trench' technology. Applications:* Motor and relay drivers * d.c. to d.c. converters The PHT6NQ10T is supplied in the SOT223 surface mounting package.
PINNING
PIN 1 2 3 4 gate drain source drain (tab) DESCRIPTION
SOT223
4
1
2
3
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER VDSS VDGR VGS ID ID IDM PD Tj, Tstg CONDITIONS MIN. - 65 MAX. 100 100 20 6.5 3 4.1 1.9 26 8.3 1.8 150 UNIT V V V A A A A A W W C Drain-source voltage Tj = 25 C to 150C Drain-gate voltage Tj = 25 C to 150C; RGS = 20 k Gate-source voltage Continuous drain current (dc) Tsp = 25 C Tamb = 25 C Continuous drain current (dc) Tsp = 100 C Tamb = 100 C Pulsed drain current Total power dissipation Tsp = 25 C Tamb = 25 C Operating junction and storage temperature
THERMAL RESISTANCES
SYMBOL Rth j-sp Rth j-amb PARAMETER Thermal resistance junction to solder point Thermal resistance junction to ambient CONDITIONS surface mounted, FR4 board surface mounted, FR4 board TYP. 12 70 MAX. 15 UNIT K/W K/W
August 1999
1
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
ELECTRICAL CHARACTERISTICS
Tj= 25C unless otherwise specified SYMBOL PARAMETER V(BR)DSS VGS(TO) RDS(ON) IGSS IDSS Qg(tot) Qgs Qgd td on tr td off tf Ld Ls Ciss Coss Crss Drain-source breakdown voltage Gate threshold voltage CONDITIONS VGS = 0 V; ID = 0.25 mA; Tj = -55C VDS = VGS; ID = 1 mA Tj = 150C Tj = -55C Drain-source on-state VGS = 10 V; ID = 3 A resistance Gate source leakage current VGS = 10 V; VDS = 0 V Zero gate voltage drain VDS = 100 V; VGS = 0 V; current Total gate charge Gate-source charge Gate-drain (Miller) charge Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time Internal drain inductance Internal source inductance Input capacitance Output capacitance Feedback capacitance ID = 6 A; VDD = 80 V; VGS = 10 V Tj = 150C Tj = 150C MIN. 100 89 2 1.2 TYP. MAX. UNIT 3 57 10 0.05 21 2.5 8.2 6 15 20 10 2.5 5 633 103 61 4 6 90 216 100 10 500 V V V V V m m nA A A nC nC nC ns ns ns ns nH nH pF pF pF
VDD = 50 V; RD = 8.2 ; VGS = 10 V; RG = 5.6 Resistive load Measured tab to centre of die Measured from source lead to source bond pad VGS = 0 V; VDS = 25 V; f = 1 MHz
REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS
Tj = 25C unless otherwise specified SYMBOL PARAMETER IS ISM VSD trr Qrr Continuous source current (body diode) Pulsed source current (body diode) Diode forward voltage Reverse recovery time Reverse recovery charge CONDITIONS Tsp = 25 C MIN. IF = 6 A; VGS = 0 V IF = 6 A; -dIF/dt = 100 A/s; VGS = 0 V; VR = 25 V TYP. MAX. UNIT 0.8 55 135 5.5 26 1.2 A A V ns nC
August 1999
2
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
Normalised Power Derating, PD (%) 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 Solder Point temperature, Tsp (C) 125 150
100
Transient thermal impedance, Zth j-sp (K/W)
10
D = 0.5 0.2 0.1
1
0.05 0.02 P D tp D = tp/T
0.1 single pulse 0.01 1E-06 T 1E-03 1E-02 1E-01 1E+00 1E+01
1E-05
1E-04
Pulse width, tp (s)
Fig.1. Normalised power dissipation. PD% = 100PD/PD 25 C = f(Tsp)
Fig.4. Transient thermal impedance. Zth j-sp = f(t); parameter D = tp/T
Drain Current, ID (A) VGS = 10V 5 4 3 2 1 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 Drain-Source Voltage, VDS (V) 1.6 1.8 2 4.8 V 8V 6V Tj = 25 C 5V 5.4 V 5.2 V
Normalised Current Derating, ID (%) 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 Solder Point temperature, Tsp (C) 125 150
6
4.6 V 4.4 V
Fig.2. Normalised continuous drain current. ID% = 100ID/ID 25 C = f(Tsp); VGS 10 V
Peak Pulsed Drain Current, IDM (A) RDS(on) = VDS/ ID tp = 10 us 10 100 us 1 ms 1 D.C. 10 ms 100 ms 0.1
Fig.5. Typical output characteristics, Tj = 25 C. ID = f(VDS)
100
0.2 0.18 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02
Drain-Source On Resistance, RDS(on) (Ohms) 4.6V 4.8V 5V 5.2 V 5.4 V 6V 8V VGS = 10V Tj = 25 C 0 1 2 3 4 Drain Current, ID (A) 5 6
0.01 1 10 100 Drain-Source Voltage, VDS (V) 1000
0
Fig.3. Safe operating area ID & IDM = f(VDS); IDM single pulse; parameter tp
Fig.6. Typical on-state resistance, Tj = 25 C. RDS(ON) = f(ID)
August 1999
3
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
Drain current, ID (A) 6 VDS > ID X RDS(ON) 5 4 3 150 C 2 Tj = 25 C 1 0 0 1 2 3 4 5 6 Gate-source voltage, VGS (V)
4.5 4 3.5 3 2.5 2 1.5 1 0.5 0
Threshold Voltage, VGS(TO) (V) maximum typical
minimum
-60
-40
-20
0
20
40
60
80
100 120 140 160 180
Junction Temperature, Tj (C)
Fig.7. Typical transfer characteristics. ID = f(VGS)
Transconductance, gfs (S) VDS > ID X RDS(ON)
Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS
Drain current, ID (A)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1.0E-01
1.0E-02
Tj = 25 C
1.0E-03
150 C
minimum typical
1.0E-04 maximum 1.0E-05
1.0E-06
0 1 2 3 4 Drain current, ID (A) 5 6
0
0.5
1 1.5 2 2.5 3 3.5 Gate-source voltage, VGS (V)
4
4.5
5
Fig.8. Typical transconductance, Tj = 25 C. gfs = f(ID)
Normalised On-state Resistance 2.9 2.7 2.5 2.3 2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Junction temperature, Tj (C)
Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 C; VDS = VGS
10000
Capacitances, Ciss, Coss, Crss (pF)
1000
Ciss
100
Coss
Crss 10 0.1 1 10 Drain-Source Voltage, VDS (V) 100
Fig.9. Normalised drain-source on-state resistance. RDS(ON)/RDS(ON)25 C = f(Tj)
Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz
August 1999
4
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
Source-Drain Diode Current, IF (A) Gate-source voltage, VGS (V) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 ID = 6A Tj = 25 C VDD = 20 V VDD = 80 V 4 150 C 3 Tj = 25 C 2 1 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Gate charge, QG (nC) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Source-Drain Voltage, VSDS (V) 6 VGS = 0 V 5
Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG)
Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj
August 1999
5
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
MECHANICAL DATA
Plastic surface mounted package; collector pad for good heat transfer; 4 leads SOT223
D
B
E
A
X
c y HE b1 vMA
4
Q A A1
1
e1 e
2
bp
3
wM B detail X
Lp
0
2 scale
4 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.8 1.5 A1 0.10 0.01 bp 0.80 0.60 b1 3.1 2.9 c 0.32 0.22 D 6.7 6.3 E 3.7 3.3 e 4.6 e1 2.3 HE 7.3 6.7 Lp 1.1 0.7 Q 0.95 0.85 v 0.2 w 0.1 y 0.1
OUTLINE VERSION SOT223
REFERENCES IEC JEDEC EIAJ
EUROPEAN PROJECTION
ISSUE DATE 96-11-11 97-02-28
Fig.15. SOT223 surface mounting package.
Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to Discrete Semiconductor Packages, Data Handbook SC18. 3. Epoxy meets UL94 V0 at 1/8".
August 1999
6
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOSTM transistor
PHT6NQ10T
DEFINITIONS
Data sheet status Objective specification Product specification Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. (c) Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
August 1999
7
Rev 1.000

▲Up To Search▲

Price & Availability of PHT6NQ10T

	To Download PHT6NQ10T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .