View SIL06C_492231.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SIL06C Series
DC/DC CONVERTERS * * * * C Class Non-isolated
5Vin and 12Vin single output
1 NEW Product
6A current rating Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value * Cost optimised design * Excellent transient response * Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time * Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332
The SIL06C series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 - 5.5VDC or 10.2 13.8VDC) and offer a wide 0.9 - 5V output voltage range with a 6A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the 5V maximum. Typical efficiencies for the models are 89% for the 5V input version and 91% for the 12V input version. The SIL06C series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL06C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V 2.5% 0.2% max. 0.5% max. 0A/6A 5V input models 12V input models 3.0% max. 1.0% max. 100mV max. 5Hz to 20MHz (See Note 2) Deviation See table
INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5Vin 12Vin 5Vin 12Vin 4.5VDC 9.0VDC 4.3VDC 7.5VDC
Output setpoint accuracy With 1.0% trim resistors Line regulation Load regulation Min./max. load Overshoot (at turn on) Undershoot Ripple and noise Transient response (See Note 1) Low line to high line Full load to min. load
GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF Telcordia SR-332 Fixed (See Note 4) See Table 200kHz TUV Product Services IEC60950, UL/cUL60950 UL94V-0 9.3 (0.3oz) 7,562,142 hours
75mV 150s recovery to within regulation band
INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 9) Input reflected ripple (See Note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Power up Remote ON/OFF 5V input model 12V input model No load Remote OFF 5V input model 12V input model 5V input model 12V input model 4.5 to 5.5VDC 10.2 to 13.8VDC 50mA 5mA 5.1A @ Io max. 1.6A @ Io max. 52mA (pk-pk) 56mA (pk-pk) Active high >2.4VDC <0.8VDC <20ms <20ms
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0C to +80C -40C to +125C
PROTECTION Short-circuit protection RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) (See Note 11) 270F/20m esr max. 680F/10m esr max. Hiccup, non-latching
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421
TUV
TUV Product Service (EN60950) Certificate No. B0211 19870 205 CB report and certificate to IEC60950
File Name: SIL06C.PDF Rev: 04 Mar 2003
SIL06C Series
DC/DC CONVERTERS C Class Non-isolated
OUTPUT POWER (MAX.) 20W 30W INPUT VOLTAGE 4.5-5.5VDC 10.2-13.8VDC OVP N/A N/A
5Vin and 12Vin single output
2 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT OUTPUT CURRENT VOLTAGE(12) (MIN.) 0.9V - 3.3V 0.9V - 5.0V 0A 0A OUTPUT CURRENT (MAX.) 6A 6A
EFFICIENCY (TYP.) 89% 91%
REGULATION LINE 0.2% 0.2% LOAD 0.5% 0.5%
MODEL NUMBER (5) SIL06C-05SADJ-V SIL06C-12SADJ-V
Part Number System with Options
SIL06C-12SADJ-V
Mounting Option V = Vertical Mount H = Horizontal Mount
Product Family SIL = Single in Line
Rated Output Current 06 = 6Amps Performance C = Cost Optimised
Number of Outputs SADJ = Single Adjustable Output
Input Voltage 05 = 4.5V - 5.5V 12 = 10.2V - 13.8V
Output Voltage Adjustment of the SIL06C Series
The ultra-wide output voltage trim range offers major advantages to users who select the SIL06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9V to 5.0V. When the SIL06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9V
Notes
1 di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 Measured with external filter. See Application Note 131 for details. 3 Power up is the time from application of DC input to Power Good enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good enabled 4 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL06C-05SADJ-H. 6 Measured as per recommended set-up. Cin = 270F (20m esr max.). Cout = 680F (10m esr max.). 7 Uses external resistor from trim to output ground. Minimum value 485 for 5V model, 280 for 12V model. See Applications Note 131 for details. 8 Signal line assumed <3m. 9 External input fusing recommended. 10 See Application Note 131 for operation above 50C. 11 See Application Note 131 for more details. 12 These models have a wide trim output. 5Vin has an output of 0.9V to 3.3V and 12 Vin has an output of 0.9V to 5V. An external resistor adjusts the output voltage.
Ripple and Noise Specification Model 5V input models 12V input models Output Voltage 0.9 to 2.5V 3.3V 0.9 to 2.5V 3.3 to 5V Pk - Pk 30mV 40mV 40mV 50mV RMS 15mV 15mV 20mV 20mV
CAUTION: High internal temperatures. Ensure that unit is not user accessible.
File Name: SIL06C.PDF Rev: 04 Mar 2003
SIL06C Series
DC/DC CONVERTERS C Class Non-isolated
5Vin and 12Vin single output
3 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
All dimensions in INCHES (mm) General tolerance 0.01in (0.25mm) except where specified otherwise
0.315 (8.00 max.)
0.062 (1.57) PCB Ref.
0.150 (3.81) Ref.
1.200 (30.48) 0.527 (13.38) 0.025 (0.64) Typ. Mechanical Support Pin
PIN 1
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 9 FUNCTION Vout Trim Ground Power Good Remote ON/OFF Vin Mechanical support Mechanical support Mechanical support on horizontal version only
0.025 (0.64) Typ.
Figure 1: Mechanical Drawing - Horizontal Mount Version
0.120 (3.05) 9 Places
PIN 8
0.610 (15.49)
All dimensions in inches (mm) General tolerance 0.01in (0.25mm) except where specified otherwise
0.070 (1.78)
0.315 (8.00) max.
0.610 (15.49)
0.040 (1.02) Ref.
1.200 (30.48)
0.062 (1.57) Ref.
Pin 8 Pin 1 0.025 (0.64)
0.150 (3.81) 8 Places
0.050 (1.27) 0.025 (0.64) Typ.
Figure 2: Mechanical Drawing - Vertical Mount Version
Data Sheet (c) Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Data Sheet
www.artesyn.com
File Name: SIL06C.PDF Rev: 04 Mar 2003

▲Up To Search▲

Price & Availability of SIL06C

	To Download SIL06C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .