View MDT80C06_534653.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
1. General Description
The MDT80C06 is a Low Cost Optical Mouse Controller for PS/2 (2D/3D, 3/5 Key) only. Work with low cost Agilent ADNS-2610, ADNS-2620, K4 K5 SCK SDIO Vdd NC OSCRH PD 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 Z2 Z1 CLK DATA Vss L M R
4. Pin Assignment MDT80C06P / MDT80C06S
ADNS-2051 or PixArt PAN101B optical mouse sensor.
2. Features
l l l Compatible with IBM PS/2 mouse. Compatible with Microsoft PS/2 scrolling mouse. Compatible with Microsoft Windows 2000 and 5-button mouse. l l Internal Power-On reset (POR). Working with Agilent ADNS-2610, ADNS-2620, ADNS-2051 or PixArt PAN101B optical mouse sensor. l The sensor position can be normal or clockwise rotate 90 degree . l l Internal RC oscillation about 6.5MHz ~7.5MHz . Support 400 or 800 DPI for ADNS-2051. Support 400DPI for PAN101BOI-204 and 800DPI for PAN101BOI-208. l l l Auto-detect photo sensor type. Low power dissipation. Z-axis supports 2 kinds of scrolling input : Z/2 or Z/4. l 16 pin DIP/SOP Package
3. Applications
2D/3D 3-Key/5-Key PS/2 optical mouse
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.1 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
5. Pin Function Description
Symbol Vdd PD I/O I/O +5V Photo-sensor power down control (Open Drain output). Also used as rotation selection. Internal 100K ohm pull-high. =1 for sensor in vertical position =0 for sensor rotating 90 degree clockwise Z1 Z2 CLK I I I/O Z-axis input for Photo Sensor or Mechanical resistors. Internal weak pull low. Connect to 8042 auxiliary port CLK line in PS/2 mode. Internal 10K ohm pull high. DATA I/O Connect to 8042 auxiliary port DATA line in PS/2 mode. Internal 10K ohm pull high. Vss R M L K4 K5 SCK I/O I I I I The 4th and 5th button inputs. Internal 100K ohm pull high. Also used to select 2D/3D and 3/5 key mouse. Serial clock output to optical mouse sensor. Internal 100K ohm pull high. Also used to select Z/2 or Z/4 SDIO I/O Serial data input/output to optical mouse sensor. Internal 100K ohm pull high. OSCRH I Connect a resistor to Vdd to adjust internal RC freq. Ground Three Key-switches inputs. Internal 50K ohm pull high. Function Description
6.Data Reporting 2DG
Bit 7 Byte 1 Byte 2 Byte 3 Y ovfl Bit 6 X ovfl Bit 5 Y sign Bit 4 X sign X data Y data Bit 3 1 Bit 2 Middle Bit1 Right Bit0 Left
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.2 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
3DG
Bit 7 Byte 1 Byte 2 Byte 3 Byte 4 0 Bit 6 0 Bit 5 Y7 Bit 4 X7 X data Y data Z data Bit 3 1 Bit 2 Middle Bit1 Right Bit0 Left
3D, 5-keyG
Bit 7 Byte 1 Byte 2 Byte 3 Byte 4 0 0 K5 K4 0 Bit 6 0 Bit 5 Y7 Bit 4 X7 X data Y data Z data Bit 3 1 Bit 2 Middle Bit1 Right Bit0 Left
7. PS/2 Mouse Commands:
The following table list the commandsG 8042 send FF FE F6 F5 F4 F3, XX F2 F0 EE EC EB EA E9 E8, XX E7 E6 Reset Resend Set Default Disable Enable Set Sampling Rate Read Device Type Set Remote Mode Set Wrap Mode Reset Wrap Mode Read Data Set Stream Mode Status Request Set Resolution Set Auto-speed Reset Auto-speed Command FA, AA, 00 XX, (XX, XX) FA FA FA FA, FA FA, 00 or FA,03 or FA 04 FA FA FA FA, XX, XX, XX FA FA, XX, XX,XX FA,FA FA FA MDT80C06 echo
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.3 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
IN DETAIL: (a). Reset (FF) The MDT80C06 reset to initial mode as power on and transmit FA, AA, 00 to system 8042. Then set default states as below : sampling rateG 100 reports/s 2 dots/count non-autospeed stream mode disable (b). Resend (FE) a. When MDT80C06 receives an invalid command, it returns a Resend code to the system. b. If MDT80C06 receives a Resend command, its last packet of data will send again to the system. (c). Set Default (F6) Initializes mouse conditions to the power-on default states. (d). Disable(F5) To disable mouse transmissions to system. (e). Enable (F4) To enable mouse transmissions to system if in stream mode. (f). Set Sampling Rate (F3, XX) Sets the sampling rate as described below Second byte XX C8 64 50 3C 28 14 0A Sample Rate 200/sec 100/sec 80/sec 60/sec 40/sec 20/sec 10/sec
(g). Read Device Type (F2) MDT80C06 send `' FA, 00'' for standard mouse or send "FA,03" for Microsoft Inteli 3D mouse or send "FA, 04" for 3D/5key mouse (h ). Set Remote Mode (F0) Set reports only in response to system Read Data(EB) command.
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.4 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
(i) . Set Wrap Mode (EE) The mouse resend the data sent by system IF Reset (FF) or Reset Wrap Mode (EC) is received wrap mode will be terminated. (j). Reset Wrap Mode (EC) Set mouse to the previous mode (k). Read Data (EB) Send mouse data in any mode. (l). Set Stream Mode (EA) Set mouse in stream mode . The report rate is set by F3 command. (m). Status Request (E9) The mouse return the status to system with 3-byte status report Byte1: Bit 0 1 2 3 4 5 6 7 1=Right button pressed 1=Middle button pressed 1=Left button pressed Reserved 0=Normal speed, 1=Autospeed 0=Disabled, 1=Enabled 0=Stream mode, 1=Remote mode Reserved Description
Byte2: Current resolution setting (D0-D7) Byte3: Current sampling rate (D0-D7)
(n) Set Resolution (E8, XX) Resolution is set as followsG Second Byte XX 00 01 02 03 (o) Set Auto speed (E7) Not supported. The MDT80C06 just responses FA (p) Reset Autospeed (E6) Not supported. The MDT80C06 just responses FA This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.5 2003/9 V1.2 Resolution 8 dots/count 4 dots/count 2 dots/count 1 dots/count
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
(). Microsoft PS/2 scrolling mouse modeG (a) When MDT80C06 received the following consecutive command. i. F3 C8 ----set report rate 200/sec ii. F3 64 ----set report rate 100/sec iii. F3 50 ----set report rate 80/sec Then it will enter the INTELI Scrolling mode (b) The mouse will return FA 03 to read device type command (F2). (c) Data report will be four bytes format. (d) The mouse will exit the Microsoft PS/2 scrolling mode only if power off or a reset command(FF) is received. (III). 3D/5key mouse modeG (e) When MDT80C06 received the following consecutive command. i. F3 C8 ----set report rate 200/sec ii. F3 C8 ----set report rate 200/sec iii. F3 50 ----set report rate 80/sec Then it will enter the 3D/5key mode. (f) The mouse will return FA 04 to read device type command (F2). (g) Data report will be four bytes format. (h) The mouse will exit the 3D/ 5key mode only if power off or a reset command(FF) is received.
().Z-axis Input FunctionG
(a). Photo couples input (b). Mechanical switches
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.6 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
8. Electrical Characteristics (TA=0J to 70J)
Absolute Maximum Ratings Parameter Min. Temperature under bias Storage temperature range Supply voltage -40 -65 -0.6 Ratings Max. 85 150 6.5 J J Volt Unit
DC Electrical Characteristics Parameters L,M,R,K4,K5,Z1,Z2 (key mode) input voltage L,M,R,K4,K5,Z1,Z2 input leakage current (Vin=0V) L,M,R,K4,K5,Z1,Z2 input leakage current (Vin=5V) SCK,SDIO input voltage Sym. Vai Iil Iih Vi PS/2 mouse mode 2.0 Min. Typ. 1.27 -1.0 1.0 Max. Unit V uA uA V
Parameters Operating voltage Operating current (no load) DATA, CLK Threshold voltage DATA, CLK Input low current (Pull Hi) DATA, CLK Low output voltage (IL1=4mA) DATA, CLK Low output voltage (IL2=8mA)
Sym. VDD IOP Vt Vt VL1 VL2
Min. 4.5
Typ. 5.0 1
Max. 5.5
Unit V mA
0.9 0.9
1.25 1.2 0.1 0.2
1.6 1.5
V mA V V
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.7 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
AC Electrical Characteristics
Parameters Oscillating Frequency Rising Edge Crossed Width Falling Edge Crossed Width Mouse CLK high period Time Mouse CLK low period Time System CLK high period Time System CLK low period Time Time that Mouse Sample DATA from CLK rising Edge Time from DATA Transition to Falling Edge of CLK Time from rising Edge of CLK to DATA Transition Time to mouse Inhibit after the 11th CLK to ensure mouse does not start another Transmission
Sym. Fosc Tr Tf Tmh Tml Tsh Tsl Tmdc
Min. 6.5
Typ. 7 15 10 40 40 40 40 20
Max. 7.5
Unit MHz is is is is is is is
Tsdc
22
is
Tscd
26
is
Tpi
0
72
is
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.8 2003/9 V1.2
MDT80C06
PS2 optical 2D/3D, 3/5 key mouse controller
9. OPT Equivalent Circuit
VSS
Pull_Hi 100K
Data Bus Read
QB G
D Data I/P Latch
Input Resistor Port Input Pin TTL Input Level
This specification is subject to be changed without notice. Please visit our web site for the most updated information. http://www.mdtic.com.tw P.9 2003/9 V1.2
VCC
HLMP-ED80
D1 C1 0.1u
R1 100K
R2 100K
R3 180K
Y1 18MHz VDD OSCI OSCO REFA REFB R_BIN PD GND S2 PD VSS 12 8 R5 10K U2 MDT80C06A1 R6 10K S3 15 16 Z1 Z2 GND U1 ADNS-2051 YB 4 C6 0.1u 9 10 11 R M L + NC 6 C7 10u YA 5 S1 XB 3 SCK SDIO CLK DATA 3 4 14 13 XA 2 1 2 K4 K5 VDD OSCRH 5 7 SDIO 16 CN1 SCK 1 LED 6
13
10. Application circuit
This specification is subject to be changed without notice. Please visit our web site for the most updated information. 10.1 2D PS2 Optical mouse (ADNS2051) :
1 2 3 4 5 6 HEADER 6
http://www.mdtic.com.tw
Option Table R6 Remove Install Install Remove Remove Install Install Remove R1 R5 R7
R7 10K
9
11
+
C2 4.7u
C3 0.1u
7
8
14
+
C4 4.7u
R4 15K
15
C5 0.1u
10
12
P.10
R2
800 DPI
Install
400 DPI
Remove
Z axis divided by 2
Z axis divided by 4
Sensor in position
normal
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Sensor rotates 90 degree clockwise
MDT80C06
VCC
D1 HLMP-ED80 C1 0.1u
R1 100K
R2 100K
R3 180K
Y1 18MHz 13 VDD OSCI OSCO REFA REFB R_BIN PD GND S2 PD VSS 12 8 R5 10K S3 U2 MDT80C06A1 15 16 Z1 Z2 R6 10K GND U1 ADNS-2051 YB 4 9 10 11 R M L NC 6 C6 0.1u YA 5 S1 XB 3 SCK SDIO CLK DATA 3 4 14 13 + C7 10u XA 2 1 2 K4 K5 VDD OSCRH 5 7 SDIO 16 CN1 SCK 1 LED 9 11 7 8 14 15 10 12 6
10.2 3D/3Key PS2 Optical Mouse (ADNS2051) :
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
1 2 3 4 5 6 HEADER 6 R7 10K
http://www.mdtic.com.tw
Option Table R2 Install Remove Install Remove Install Remove Install Remove Install Remove R6 R1 R5 R7
+
C2 4.7u
C3 0.1u
+
C4 4.7u
C5 0.1u
R4 15K
P.11
Mechanical Scrolling Wheel
800 DPI
400 DPI
Z axis divided by 2
Z axis divided by 4
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Sensor in position
normal
Sensor rotates 90 degree clockwise
MDT80C06
VCC
R1 100K R5 180K C1 0.1u D1 HLMP-ED80
R2 100K
R3 47K
R4 47K
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
13 VDD OSCI OSCO S1 S2 XA XB YA YB S4 PD VSS 12 8 R7 10K U2 MDT80C06A1 R8 10K S5 15 16 Z1 Z2 4 NC 6 + C6 0.1u C7 10u 9 10 11 R M L 5 S3 3 SCK SDIO CLK DATA 3 4 14 13 2 1 2 K4 K5 VDD OSCRH 5 7 REFA REFB R_BIN PD GND GND U1 ADNS-2051 SDIO 16 CN1 SCK 1 LED 9 11 7 8 14 15 10 12 6
http://www.mdtic.com.tw 10.3 3D/5key PS2 Optical Mouse (ADNS2051) :
1 2 3 4 5 6 HEADER 6 R9 10K
Y1 18MHz
+
C2 4.7u
C3 0.1u
+
C4 4.7u
C5 0.1u
R6 15K
P.12
Option Table R8 Remove Install Install Remove Install Remove Install Remove R1 R7 R9
Mechanical Scrolling Wheel
R2
800 DPI
Install
400 DPI
Remove
Z axis divided by 2
Z axis divided by 4
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Sensor in position
normal
MDT80C06
Sensor rotates 90 degree clockwise
VCC
D1 HLMP-ED80
R1 100K
R2 100K
R3 47K
R4 47K
R5 180K
C1 0.1u
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
13 VDD OSCI OSCO S1 S2 XA XB YA YB S4 PD 12 8 R7 10K R8 10K S5 15 16 Z1 Z2 VSS U2 MDT80C06A1 4 NC 6 C6 0.1u + C7 10u 9 10 11 R M L 5 S3 3 SCK SDIO CLK DATA 3 4 14 13 2 1 2 K4 K5 VDD OSCRH 5 7 REFA REFB R_BIN PD GND GND U1 ADNS-2051 SDIO 16 CN1 SCK 1 LED 9 11 7 8 14 15 10 12 6 1 2 3 4 5 6 HEADER 6 R9 10K
http://www.mdtic.com.tw 10.4 3D/5Key, Photo-coupler Zaxis, PS2 Optical Mouse (ADNS2051) :
Option Table R2 Install Remove Install Remove Remove Install Remove Install Install Remove R8 R1 R7 R9
Y1 18MHz
+
C2 4.7u
C3 0.1u
+
C4 4.7u
C5 0.1u
R6 15K
P.13
D2 LED
Q1
Q2
R10 R
800 DPI
400 DPI
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 2
Z axis divided by 4
Sensor in position
normal
MDT80C06
Sensor rotates 90 degree clockwise
VCC
R1 100K R3 180K C1 0.1u
R2 R
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
D1 HLMP
http://www.mdtic.com.tw
ED80
Q1 2N3906 R4 1K R5 100K CN1 7 VDD OSCI OSCO S1 8 NC PD S2 + C6 2.2u S3 Z1 Z2 15 16 R6 10K R M L 6 8 12 VSS R7 10K C4 0.1u + C5 10u 9 10 11 GND U1 ADNS-2610/2620 REFA SDIO 3 3 4 SCK SDIO CLK DATA 14 13 SCK 4 LED 1 2 6 K4 K5 VDD OSCRH 5 1 2 5 7
10.5 2D PS2 Optical Mouse (ADNS2610/2620) :
Y1 24MHz
P.14
U2 MDT80C06A1
+
C2 4.7u
C3 0.1u
1 2 3 4 5 6 HEADER 6
Option Table R5 Install Remove Remove Install Install Remove R6 R7
Z axis divided by 2
Z axis divided by 4
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Sensor in position
normal
Sensor rotates 90 degree clockwise
MDT80C06
VCC
R1 100K R3 180K C1 0.1u
R2 R
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
D1 HLMP
http://www.mdtic.com.tw
ED80
Q1 2N3906 R4 1K R5 100K CN1 7 VDD OSCI OSCO S1 8 NC PD S2 + C6 2.2u S3 15 16 R6 10K R M L Z1 Z2 VSS U2 MDT80C06A1 6 8 12 R7 10K C4 0.1u + C5 10u 9 10 11 GND U1 ADNS-2610/2620 REFA SDIO 3 3 4 SCK SDIO CLK DATA 14 13 SCK 4 LED 1 2 6 K4 K5 VDD OSCRH 5 1 2 5 7 1 2 3 4 5 6 HEADER 6
Y1 24MHz
10.6 3D/3Key PS2 Optical Mouse (ADNS2610/ADNS2620) :
P.15
Option Table R5 Install Remove Remove Install Install Remove R6 R7
+
C2 4.7u
C3 0.1u
Mechanical Scrolling Wheel
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 2
Z axis divided by 4
Sensor in position
normal
MDT80C06
Sensor rotates 90 degree clockwise
VCC
R1 100K R5 180K C1 0.1u
R2 R
R3 47K
R4 47K
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
D1 HLMP
http://www.mdtic.com.tw
ED80
Q1 2N3906 R6 1K S1 CN1 7 VDD OSCI OSCO S3 8 NC PD VSS S4 S5 15 16 Z1 Z2 R M L 9 10 11 6 8 12 R9 10K C4 0.1u + C5 10u GND U1 ADNS-2610/2620 + C6 2.2u R8 10K REFA SDIO 3 3 4 SCK SDIO CLK DATA 14 13 SCK 4 LED 1 2 6 K4 K5 VDD OSCRH 5 S2 1 2 5 7 R7 100K 1 2 3 4 5 6 HEADER 6
Y1 24MHz
10.7 3D/5key PS2 Optical Mouse (ADNS2610/2620) :
P.16
U2 MDT80C06A1
+
C2 4.7u
C3 0.1u
Mechanical Scrolling Wheel
Option Table R7 Install Remove Install Remove Install Remove R8 R9
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
normal
Z axis divided by 2
Z axis divided by 4
Sensor in position
MDT80C06
Sensor rotates 90 degree clockwise
VCC
R1 100K C1 0.1u
R2 R
R3 47K
R4 47K
R5 180K
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
D1 HLMP
http://www.mdtic.com.tw
ED80
Q1 2N3906 R6 1K S1 CN1 7 VDD OSCI OSCO S3 8 NC PD R8 10K S5 15 16 S4 R M L 6 8 12 R9 10K C4 0.1u + C5 10u 9 10 11 GND REFA U1 ADNS-2610/2620 + C6 2.2u Q2 SDIO 3 3 4 SCK SDIO CLK DATA 14 13 SCK 4 LED S2 K4 K5 VDD OSCRH 1 2 6 5 1 2 5 7 R7 100K 1 2 3 4 5 6 HEADER 6 Z1 Z2 VSS U2 MDT80C06A1
Y1 24MHz
10.8 3D/5key, Photo-coupler Z-axis, PS2 Optical Mouse (ADNS2610/2620) :
P.17
Option Table R7 Install Remove Install Remove Install Remove R8 R9 normal
+
C2 4.7u
C3 0.1u
D2 LED
Q1
R10 R
Z axis divided by 2
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 4
Sensor in position
MDT80C06
Sensor rotates 90 degree clockwise
U1 AIC1722 VCC
1
IN R2 100K C2 0.1u R3 100K R4 180K
OUT
2
GND
+
C1 10u
C3 0.1u
R1 R
3
10.9 2D PS2 Optical Mouse (PANS101B) :
+
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
U2 1 VSS_LED LED OSCO OSCI VSSD VSSA VDDD VDDA S2 12 11 VSS MDT80C06A1 R7 10K S3 15 16 Z1 Z2 12 PD 8 VRB VRT PAN101BOI VAY XA NC 13 9 10 11 R M L NC 6 C7 0.1u + C6 10u XB 14 S1 YA 15 SCK SDIO CLK DATA 3 4 14 13 NC 16 1 2 K4 K5 VDD OSCRH 5 7 YB 17 U3 SCLK 18 CN1 SDIO 19 PD 2 3 4 5 6 7 8 9 10 20 1 2 3 4 5 6 HEADER 6
http://www.mdtic.com.tw
Option Table R7 normal Remove Install
D1 LED
C4 10p
C5 10p
Y1 18.432MHz
3.3V
P.18
C8 1u
C9 0.1u
C10 0.1u
Sensor in position
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Sensor rotates 90 degree clockwise
MDT80C06
U1 AIC1722 VCC
1
IN R2 100K R6 180K C2 0.1u R3 100K
OUT
2
GND
+
C1 10u
R1 R
3
C3 0.1u
+
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
U2 1 VSS_LED LED OSCO OSCI VSSD VSSA VDDD VDDA S2 PD S3 MDT80C06A1 15 16 Z1 Z2 8 12 VSS VRB VRT PAN101BOI VAY 11 XA 12 R7 10K NC 13 9 10 11 R M L NC 6 C7 0.1u + C6 10u XB 14 S1 YA 15 SCK SDIO CLK DATA 3 4 14 13 NC 16 1 2 K4 K5 VDD OSCRH 5 7 YB 17 U3 SCLK 18 CN1 SDIO 19 PD 2 3 4 5 6 7 8 9 10 20 1 2 3 4 5 6 HEADER 6
http://www.mdtic.com.tw 10.10 3D/3key PS2 Optical Mouse (PANS101B) :
Mechanical Scrolling Wheel
R8 10K
D1 LED
C4 10p
C5 10p
Y1 18.432MHz
P.19
Option Table R2 Install Remove Install Remove Install Remove R7 R8 normal
3.3V
C8 1u
C9 0.1u
C10 0.1u
Z axis divided by 2
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 4
Sensor in position
MDT80C06
Sensor rotates 90 degree clockwise
U1 AIC1722 VCC
1
IN R2 100K R6 180K C2 0.1u R3 100K R4 47K R5 47K
OUT
2
GND
+
C1 10u
C3 0.1u
R1 R
3
+
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
U2 1 VSS_LED LED OSCO S1 17 S2 16 15 14 13 S4 PD S5 MDT80C06A1 15 16 Z1 Z2 8 12 VSS 12 11 NC 6 C7 0.1u + C6 10u R7 10K 9 10 11 R M L S3 SCK SDIO CLK DATA 3 4 14 13 K4 K5 VDD OSCRH 1 2 5 7 U3 OSCI VSSD VSSA VDDD VDDA VRB VRT PAN101BOI VAY XA NC XB YA NC YB SCLK 18 CN1 SDIO 19 PD 2 3 4 5 6 7 8 9 10 20 1 2 3 4 5 6 HEADER 6
http://www.mdtic.com.tw 10.11 3D/5key PS2 Optical Mouse (PAN101B) :
Mechanical Scrolling Wheel
R8 10K
D1 LED
C4 10p
C5 10p
Y1 18.432MHz
P.20
Option Table R2 Install Remove Install Remove Install Remove R7 R8 normal
3.3V
C8 1u
C9 0.1u
C10 0.1u
Z axis divided by 2
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 4
Sensor in position
MDT80C06
Sensor rotates 90 degree clockwise
U1 AIC1722 VCC
1
IN R2 100K R6 180K C2 0.1u R3 100K R4 47K R5 47K
OUT
2
GND
+
C1 10u
C3 0.1u
R1 R
3
+
This specification is subject to be changed without notice. Please visit our web site for the most updated information.
U2 1 VSS_LED LED OSCO S1 17 S2 16 15 14 13 S4 PD 8 12 11 MDT80C06A1 R8 10K Q1 D2 LED Q2 S5 15 16 Z1 Z2 VSS R7 10K NC 6 C7 0.1u + C6 10u 9 10 11 R M L 12 S3 SCK SDIO CLK DATA 3 4 14 13 K4 K5 VDD OSCRH 1 2 5 7 U3 OSCI VSSD VSSA VDDD VDDA VRB VRT PAN101BOI VAY XA NC XB YA NC YB SCLK 18 CN1 SDIO 19 PD 2 3 4 5 6 7 8 9 10 20 1 2 3 4 5 6 HEADER 6
http://www.mdtic.com.tw 10.12 3D/5Key, Photo-coupler Z-axis, PS2 Optical Mouse (PAN101B) :
R9 R
D1 LED
C4 10p
C5 10p
Y1 18.432MHz
P.21
Option Table R2 Install Remove Remove Install Remove Install R7 R8 normal
3.3V
C8 1u
C9 0.1u
C10 0.1u
PS2 optical 2D/3D, 3/5 key mouse controller
2003/9 V1.2
Z axis divided by 2
Z axis divided by 4
Sensor in position
MDT80C06
Sensor rotates 90 degree clockwise

▲Up To Search▲

Price & Availability of MDT80C06

	To Download MDT80C06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .