![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 95494 IRF3007SPbF AUTOMOTIVE MOSFET IRF3007LPBF Typical Applications l l 42 Volts Automotive Electrical Systems Lead-Free HEXFET(R) Power MOSFET D Features l l l l VDSS = 75V G S Ultra Low On-Resistance 175C Operating Temperature Fast Switching Repetitive Avalanche Allowed up to Tjmax RDS(on) = 0.0126 ID = 62A Description Specifically designed for Automotive applications, this design of HEXFET(R) Power MOSFETs utilizes the lastest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this HEXFET power MOSFET are a 175C junction operating temperature, fast switching speed and improved repetitive avalanche rating. These combine to make this design an extremely efficient and reliable device for use in Automotive applications and a wide variety of other applications. D2Pak IRF3007S Max. TO-262 IRF3007L Units A W W/C V mJ A mJ C Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS EAS EAS (6 sigma) IAR EAR TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Single Pulse Avalanche Energy Tested Value Avalanche Current Repetitive Avalanche Energy Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds 62 44 320 120 0.8 20 290 946 See Fig.12a, 12b, 15, 16 -55 to + 175 300 (1.6mm from case ) Thermal Resistance Parameter RJC RJA Junction-to-Case Junction-to-Ambient (PCB Mounted,steady state)** Typ. --- --- Max. 1.25 62 Units C/W ** This is applied to D2Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. www.irf.com 1 07/01/04 IRF3007S/LPbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS V(BR)DSS/TJ RDS(on) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD LS Ciss Coss Crss Coss Coss Coss eff. Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. 75 --- --- 2.0 180 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. --- 0.084 10.5 --- --- --- --- --- --- 89 21 30 12 80 55 49 4.5 7.5 3270 520 78 3500 340 640 Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, ID = 1mA 12.6 m VGS = 10V, ID = 48A 4.0 V VDS = 10V, ID = 250A --- S VDS = 25V, ID = 48A 20 VDS = 75V, VGS = 0V A 250 VDS = 60V, VGS = 0V, TJ = 150C 200 VGS = 20V nA -200 VGS = -20V 130 ID = 48A 32 nC VDS = 60V 45 VGS = 10V --- VDD = 38V --- ID = 48A ns --- RG = 4.6 --- VGS = 10V D Between lead, --- 6mm (0.25in.) nH G from package --- and center of die contact S --- VGS = 0V --- pF VDS = 25V --- = 1.0MHz, See Fig. 5 --- VGS = 0V, VDS = 1.0V, = 1.0MHz --- VGS = 0V, VDS = 60V, = 1.0MHz --- VGS = 0V, VDS = 0V to 60V Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr ton Notes: Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol --- --- 80 showing the A G integral reverse --- --- 320 S p-n junction diode. --- --- 1.3 V TJ = 25C, IS = 48A, VGS = 0V --- 85 130 ns TJ = 25C, IF = 48A, VDD = 38V --- 280 420 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS . max. junction temperature. (See fig. 11). Starting TJ = 25C, L = 0.24mH Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive R G = 25, IAS = 48A, VGS=10V (See Figure 12). avalanche performance. ISD 48A, di/dt 330A/s, VDD V(BR)DSS, This value determined from sample failure population. 100% TJ 175C tested to this value in production. Pulse width 400s; duty cycle 2%. Repetitive rating; pulse width limited by 2 www.irf.com IRF3007S/LPbF 1000 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 1000 100 ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) 100 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP 4.5V 10 10 4.5V 20s PULSE WIDTH Tj = 25C 1 0.1 1 10 100 20s PULSE WIDTH Tj = 175C 1 0.1 1 10 100 VDS, Drain-to-Source Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000 100 Gfs, Forward Transconductance (S) ID, Drain-to-Source Current ( A) T J = 175C 80 100 T J = 175C 60 T J = 25C 40 10 T J = 25C 20 VDS = 25V 20s PULSE WIDTH 0 0 40 80 120 160 1 4.0 5.0 6.0 VDS = 25V 20s PULSE WIDTH 7.0 8.0 9.0 VGS , Gate-to-Source Voltage (V) ID, Drain-to-Source Current (A) Fig 3. Typical Transfer Characteristics Fig 4. Typical Forward Transconductance Vs. Drain Current www.irf.com 3 IRF3007S/LPbF 6000 VGS = 0V, f = 1 MHZ C iss = C gs + C gd , C ds SHORTED Crss Coss = Cgd = C + Cgd ds 20 ID= 48A VGS , Gate-to-Source Voltage (V) 5000 16 VDS= 60V VDS= 38V VDS= 15V C, Capacitance (pF) 4000 12 Ciss 3000 8 2000 4 1000 0 1 10 Coss Crss 100 0 0 40 80 120 160 Q G Total Gate Charge (nC) VDS, Drain-to-Source Voltage (V) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 1000.0 10000 OPERATION IN THIS AREA LIMITED BY RDS(on) ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 1000 100.0 TJ = 175C 10.0 100 100sec 10 1msec 1 10msec 1.0 T J = 25C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 VGS = 0V 1.4 1.6 1.8 0.1 Tc = 25C Tj = 175C Single Pulse 1 10 100 1000 VSD, Source-toDrain Voltage (V) VDS , Drain-toSource Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRF3007S/LPbF 70 60 50 40 30 20 10 0 25 50 75 100 125 150 175 T C , Case Temperature (C) RDS(on) , Drain-to-Source On Resistance 3.0 I D = 80A 2.5 ID, Drain Current (A) 2.0 (Normalized) 1.5 1.0 0.5 V GS = 10V 0.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 TJ, Junction Temperature ( C) Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10. Normalized On-Resistance Vs. Temperature 10 Thermal Response ( Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 P DM t1 t2 0.01 SINGLE PULSE ( THERMAL RESPONSE ) Notes: 1. Duty factor D = 2. Peak T t1/ t 2 +T C J = P DM x Z thJC 0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRF3007S/LPbF EAS , Single Pulse Avalanche Energy (mJ) 15V 700 600 500 400 300 200 100 0 25 50 75 100 125 150 VDS L DRIVER ID 20A 34A BOTTOM 48A TOP RG 20V VGS D.U.T IAS tp + V - DD A 0.01 Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp Starting T J , Junction Temperature (C) I AS Fig 12b. Unclamped Inductive Waveforms QG Fig 12c. Maximum Avalanche Energy Vs. Drain Current 10 V QGS VG QGD -VGS(th) Gate threshold Voltage (V) 4.0 ID = 250A 3.0 Charge Fig 13a. Basic Gate Charge Waveform Current Regulator Same Type as D.U.T. 2.0 50K 12V .2F .3F D.U.T. VGS 3mA + V - DS 1.0 -75 -50 -25 0 25 50 75 100 125 150 175 T J , Temperature ( C ) IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit Fig 14. Threshold Voltage Vs. Temperature 6 www.irf.com IRF3007S/LPbF 1000 Duty Cycle = Single Pulse Allowed avalanche Current vs avalanche pulsewidth, tav assuming Tj = 25C due to avalanche losses. Note: In no case should Tj be allowed to exceed Tjmax Avalanche Current (A) 100 0.01 0.05 10 0.10 1 0.1 1.0E-08 1.0E-07 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 tav (sec) Fig 15. Typical Avalanche Current Vs.Pulsewidth 300 EAR , Avalanche Energy (mJ) T OP Single Pulse BOTT OM 50% Duty Cycle ID = 48A 200 100 0 25 50 75 100 125 150 Starting TJ , Junction Temperature (C) Notes on Repetitive Avalanche Curves , Figures 15, 16: (For further info, see AN-1005 at www.irf.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of T jmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 12a, 12b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. I av = Allowable avalanche current. 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25C in Figure 15, 16). tav = Average time in avalanche. 175 D = Duty cycle in avalanche = tav *f ZthJC(D, tav ) = Transient thermal resistance, see figure 11) PD (ave) = 1/2 ( 1.3*BV*Iav) = DT/ ZthJC Iav = 2DT/ [1.3*BV*Zth] EAS (AR) = PD (ave)*tav Fig 16. Maximum Avalanche Energy Vs. Temperature www.irf.com 7 IRF3007S/LPbF D.U.T Driver Gate Drive P.W. Period VGS=10V + P.W. Period D= + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. I SD controlled by Duty Factor "D" D.U.T. - Device Under Test VDD VDD + - Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 17. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET(R) Power MOSFETs RD V DS VGS RG 10V Pulse Width 1 s Duty Factor 0.1 % D.U.T. + -VDD Fig 18a. Switching Time Test Circuit VDS 90% 10% VGS td(on) tr t d(off) tf Fig 18b. Switching Time Waveforms 8 www.irf.com IRF3007S/LPbF D2Pak Package Outline Dimensions are shown in millimeters (inches) D2Pak Part Marking Information T HIS IS AN IRF530S WITH L OT CODE 8024 AS S EMBLE D ON WW 02, 2000 IN T HE AS S EMBLY L INE "L" Note: "P" in as sembly line pos ition indicates "Lead-Free" INT ERNATIONAL RE CTIF IER LOGO AS S EMBLY L OT CODE PART NUMBE R F530S DAT E CODE YEAR 0 = 2000 WEE K 02 LINE L OR INT E RNAT IONAL RECT IF IE R LOGO AS S EMB LY LOT CODE PART NUMB ER F 530S DAT E CODE P = DES IGNAT E S LE AD-F RE E PRODUCT (OPT IONAL) YE AR 0 = 2000 WEE K 02 A = ASS E MB LY S IT E CODE www.irf.com 9 IRF3007S/LPbF TO-262 Package Outline Dimensions are shown in millimeters (inches) TO-262 Part Marking Information EXAMPLE: THIS IS AN IRL3103L LOT CODE 1789 AS S EMBLED ON WW 19, 1997 IN T HE AS S EMBLY LINE "C" Note: "P" in ass embly line position indicates "Lead-Free" INTERNAT IONAL RECTIFIER LOGO AS S EMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C OR INTERNAT IONAL RE CTIFIER LOGO AS S E MBLY LOT CODE PART NUMBER DATE CODE P = DES IGNATES LEAD-FREE PRODUCT (OPTIONAL) YE AR 7 = 1997 WEE K 19 A = AS S EMBLY S ITE CODE 10 www.irf.com IRF3007S/LPbF D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) 1.60 (.063) 1.50 (.059) 0.368 (.0145) 0.342 (.0135) FEED DIRECTION 1.85 (.073) 1.65 (.065) 11.60 (.457) 11.40 (.449) 15.42 (.609) 15.22 (.601) 24.30 (.957) 23.90 (.941) TRL 10.90 (.429) 10.70 (.421) 1.75 (.069) 1.25 (.049) 16.10 (.634) 15.90 (.626) 4.72 (.136) 4.52 (.178) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. 60.00 (2.362) MIN. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 26.40 (1.039) 24.40 (.961) 3 30.40 (1.197) MAX. 4 Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 07/04 www.irf.com 11 |
Price & Availability of IRF3007LPBF
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |