 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) EL5132, EL5133 Data Sheet October 26, 2005 FN7382.5 670MHz Low Noise Amplifiers The EL5132 and EL5133 are ultra-low voltage noise, high speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional noise performance. Stable at gains as low as 10, these devices offer 120mA of drive performance. Not only do these devices find perfect application in high gain applications, they maintain their performance down to lower gain settings. These amplifiers are available in small package options (SOT-23) as well as the industry-standard SO packages. All parts are specified for operation over the -40C to +85C temperature range. Features * 670MHz -3dB bandwidth * Ultra low noise 0.9nV/Hz * 1000V/s slew rate * Low supply current = 12mA * Single supplies from 5V to 12V * Dual supplies from 2.5V to 5V * Fast disable on the EL5132 * Low cost * Pb-free plus anneal available (RoHS compliant) Applications * Imaging * Instrumentation * Communications devices Pinouts EL5132 (8 LD SO) TOP VIEW NC 1 IN- 2 IN+ 3 VS- 4 + 8 CE 7 VS+ 6 OUT 5 NC Ordering Information PART NUMBER EL5132IS EL5132IS-T7 EL5132IS-T13 PART MARKING 5132IS 5132IS 5132IS 5132ISZ 5132ISZ PACKAGE 8 Ld SO 8 Ld SO 8 Ld SO 8 Ld SO (Pb-free) 8 Ld SO (Pb-free) 8 Ld SO (Pb-free) 5 Ld SOT-23 5 Ld SOT-23 TAPE & REEL 7" 13" 7" 13" 7" (3K pcs) PKG. DWG. # MDP0027 MDP0027 MDP0027 MDP0027 MDP0027 MDP0027 MDP0038 EL5133 (5 LD SOT-23) TOP VIEW OUT 1 VS- 2 IN+ 3 +4 IN5 VS+ EL5132ISZ (See Note) EL5132ISZ-T7 (See Note) EL5132ISZ-T13 5132ISZ (See Note) EL5133IW-T7 BCAA EL5133IW-T7A BCAA 7" MDP0038 (250 pcs) NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003-2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL5132, EL5133 Absolute Maximum Ratings (TA = 25C) Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . 13.2V IIN-, IIN+, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65C to +125C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40C to +85C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125C CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications PARAMETER VOS TCVOS IB IOS TCIOS PSRR CMRR CMIR RIN CIN IS AVOL VO ISC BW BW GBWP PM SR tR, tF OS tPD tS dG dP eN iN Offset Voltage VS+ = +5V, VS- = -5V, RL = 500, RF = 225, RG = 25, TA = 25C, unless otherwise specified. CONDITIONS MIN -1 Measured from TMIN to TMAX VIN = 0V VIN = 0V Measured from TMIN to TMAX VS+ = 4.75V to 5.25V VIN = 3.0 V Guaranteed by CMRR test Common mode 75 80 3 2 8 -1250 TYP 0.5 0.8 12 400 3 87 100 3.3 5 2 9.2 VOUT = 2.5V, RL = 1k to GND RF = 900, RG = 100, RL = 150 RL = 10 AV = +10, RL = 1k AV = +10, RL = 1k 5 3.1 70 11 8.5 3.5 140 670 90 3000 RL = 1k, CL = 6pF RL = 100, VOUT = 2.5V 0.1VSTEP 0.1VSTEP 0.1VSTEP 700 55 1000 TBD TBD TBD 6.6 AV = +2, RF = 1k AV = +2, RF = 1k f = 10kHz f = 10kHz 0.01 0.01 0.9 4.9 13 20 +1250 MAX 1 UNIT mV V/C A nA nA/C dB dB V M pF mA KV/V V mA MHz MHz MHz V/s ns % ns ns % nV/Hz pA/Hz DESCRIPTION Offset Voltage Temperature Coefficient Input Bias Current Input Offset Current Input Bias Current Temperature Coefficient Power Supply Rejection Ratio Common Mode Rejection Ratio Common Mode Input Range Input Resistance Input Capacitance Supply Current Open Loop Gain Output Voltage Swing Short Circuit Current -3dB Bandwidth 0.1dB Bandwidth Gain Bandwidth Product Phase Margin Slew Rate Rise Time, Fall Time Overshoot Propagation Delay 0.01% Settling Time Differential Gain Differential Phase Input Noise Voltage Input Noise Current 2 EL5132, EL5133 Typical Performance Curves 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 NORMALIZED GAIN (dB) 60 0 -60 -120 PHASE -180 -240 1M 10M 100M 1G -300 PHASE () VS=5V AV=+10 RG=25 RL=500 CL=+1pF 300 240 180 GAIN 120 5 4 3 2 1 0 -1 -2 -3 -4 -5 100k 1M -3dB BW @ 700MHz 10M 100M FREQUENCY (Hz) 1G -5 100k FREQUENCY (Hz) FIGURE 1. GAIN & PHASE vs FREQUENCY FIGURE 2. -3dB BANDWIDTH 0.5 0.4 NORMALIZED GAIN (dB) 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 100k 10M FREQUENCY (Hz) 100M 0.1dB BW @ 30MHz NORMALIZED GAIN (dB) 5 4 3 2 1 0 -1 -2 -3 -4 VS=5V RG=25 RL=500 CL=+1pF AV=+10 AV=+30 AV=+20 1M 10M 100M FREQUENCY (Hz) 1G -5 100k FIGURE 3. 0.1dB BANDWIDTH FIGURE 4. GAIN vs FREQUENCY FOR VARIOUS +AV VS=5V RL=500 GAIN-BANDWIDTH PRODUCT (MHz) 70 60 GAIN (dB) 50 40 30 20 1.0 4000 3500 3000 2500 2000 1500 1000 3.0 VS=5V RL=500 GAIN=40dB or 100 FREQ.=31.6MHz GAIN BW PRODUCT=31.6x100=3160MHz 10.0 FREQUENCY (MHz) 100.0 3.5 4.0 4.5 5.0 5.5 6.0 SUPPLY VOLTAGES (V) FIGURE 5. GAIN BANDWIDTH PRODUCT FIGURE 6. GAIN BANDWIDTH PRODUCT vs SUPPLY VOLTAGES 3 EL5132, EL5133 Typical Performance Curves (Continued) 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 NORMALIZED GAIN (dB) AV=+10 RG=25 RL=500 CL=+1pF 5 4 3 2 1 0 -1 -2 -3 -4 1G VS=4 VS=5V AV=+10 RG=25 CL=+1pF RL=1k VS=6 VS=5V VS=3V VS=2.5V 1M 10M FREQUENCY (Hz) 100M RL=100 RL=150 RL=500 1M 10M 100M 1G -5 100k -5 100k FREQUENCY (Hz) FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS VS FIGURE 8. GAIN vs FREQUENCY FOR VARIOUS RLOAD (AV = +10) 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 NORMALIZED GAIN (dB) VS=5V AV=+20 RG=25 CL=+1pF RL=1k 5 4 3 2 1 0 -1 -2 -3 -4 1G VS=5V AV=+10 RG=25 RF=225 RL=500 CL=3.3pF CL=6.8pF CL=12pF RL=500 RL=150 RL=100 1M 10M 100M FREQUENCY (Hz) CL=1pF -5 100k -5 100k 1M 10M FREQUENCY (Hz) 100M 1G FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS RLOAD (AV = +20) FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS CLOAD (AV = +10) 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 NORMALIZED GAIN (dB) VS=5V AV=+20 RG=25 RF=475 RL=500 5 CL=39pF CL=23pF CL=12pF 4 3 2 1 0 -1 -2 -3 -4 1M 10M 100M FREQUENCY (Hz) 1G VS=5V AV=+10 RL=500 CL=+1pF RF=900 RF=450 CL=1pF RF=90 RF=225 1M 10M FREQUENCY (Hz) 100M 1G -5 100k -5 100k FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS CLOAD (AV = +20) FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +10) 4 EL5132, EL5133 Typical Performance Curves (Continued) 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 -5 100k 1M 10M FREQUENCY (Hz) RF=953 RF=190 RF=475 100M 1G NORMALIZED GAIN (dB) VS=5V AV=+20 RL=500 CL=+1pF 5 4 3 2 1 0 -1 -2 -3 -4 RF=1.9k VS=5V AV=+10 RG=25 RL=500 CL=+1pF CIN=6.8pF CIN=3.9pF CIN=2.2pF CIN=0pF -5 100k 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 13. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +20) FIGURE 14. GAIN vs FREQUENCY FOR VARIOUS CIN(-) (AV = +10) 5 4 NORMALIZED GAIN (dB) 3 2 1 0 -1 -2 -3 -4 OPEN LOOP GAIN (dB) 50 40 30 20 10 0 -10 OPEN LOOP GAIN OPEN LOOP PHASE 60 0 -60 -120 -180 -240 1k 10k 100k 1M 10M 100M 1G -300 CIN=8.2pF CIN=0pF 1M 10M 100M FREQUENCY (Hz) 1G -5 100k FREQUENCY (Hz) FIGURE 15. GAIN vs FREQUENCY FOR VARIOUS CIN (AV = +20) FIGURE 16. OPEN LOOP GAIN & PHASE vs FREQUENCY 100 OUTPUT IMPEDANCE () VS=5V -10 -20 -30 CMRR (dB) -40 -50 -60 -70 -80 -90 -100 AV=+10 VS=5V 10 1 0.10 0.01 10k 100k 1M 10M 100M -110 1k 10k 100k 1M 10M 100M 500M FREQUENCY (MHz) FREQUENCY (Hz) FIGURE 17. OUTPUT IMPEDANCE vs FREQUENCY FIGURE 18. CMRR vs FREQUENCY 5 PHASE () VS=5V AV=+20 RG=25 RL=500 CL=+1pF CIN=22pF CIN=15pF CIN=12pF 90 80 70 60 Vs=5V 300 240 180 120 EL5132, EL5133 Typical Performance Curves (Continued) 10 -10 PSRR (dB) -20 -30 -40 -50 -60 -70 -80 -90 1k 10k 100k VS+ 1M 10M 100M 500M VSOUTPUT SWING GAIN (dB) 0 AV=+10 VS=5V 5 4 3 2 1 0 -1 -2 -3 -4 -5 1M VOUT=670mVp-p VOUT=2.1Vp-p VOUT=3.8Vp-p VOUT=6.6Vp-p 10M 100M FREQUENCY (Hz) 1G VS=5V AV=+10 RG=25 RL=500 CL=+1pF VOUT=240mVp-p FREQUENCY (Hz) FIGURE 19. PSRR vs FREQUENCY FIGURE 20. OUTPUT SWING vs FREQUENCY 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 GROUP DELAY (ns) ISOLATION (dB) VS=5V AV=+10 RG=25 RL=500 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 VS=5V AV=+20 RG=25 CHIP DISABLED INPUT TO OUTPUT OUTPUT TO INPUT 0 1M 10M FREQUENCY (Hz) 100M 1G -140 100k 1M 10M 100M FREQUENCY (Hz) FIGURE 21. GROUP DELAY vs FREQUENCY FIGURE 22. INPUT & OUTPUT ISOLATION -30 HARMONIC DISTORTION (dBc) -20 T.H.D HARMONIC DISTORTION (dBc) -30 -40 -50 -60 -70 -80 -90 -100 0 5 10 15 20 25 30 35 FUNDAMENTAL FREQUENCY (MHz) 40 0 VS=5V -40 AV=+10 RG=25 -50 RL=500 VOUT=2Vp-p -60 -70 -80 -90 -100 2nd H.D VS=5V AV=+10 RG=25 RL=500 FIN=10MHz 3rd H.D FIN=1MHz 1 2 3 4 5 6 OUTPUT LEVEL (Vp-p) 7 8 FIGURE 23. HARMONIC DISTORTION vs FREQUENCY FIGURE 24. TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE 6 EL5132, EL5133 Typical Performance Curves (Continued) 6 5 4 AMPLITUDE (V) 3 2 1 0 -1 -2 -3 -400 -200 0 OUTPUT SIGNAL 200 400 600 800 1000 1200 6 5 AMPLITUDE (V) 4 3 2 1 0 -1 -2 -1000 -800 -600 -400 -200 0 TIME (ns) 200 400 600 VS=5V RL=500 VOUT=2Vp-p ENABLE SIGNAL VS=5V RL=500 VOUT=2Vp-p DISABLE SIGNAL OUTPUT SIGNAL TIME (ns) FIGURE 25. ENABLE TIME FIGURE 26. DISABLE TIME 100.0 VOLTAGE NOISE (nV/Hz) VS=5V CURRENT NOISE (pA/Hz) 1000.0 VS=5V 10.0 100.0 1.0 10.0 0.1 1.0 0.0 10 100 1k 10k FREQUENCY (Hz) 100k 1M 0.1 10 100 1k 10k 100k FREQUENCY (Hz) 1M FIGURE 27. EQUIVALENT INPUT VOLTAGE NOISE vs FREQUENCY FIGURE 28. EQUIVALENT INPUT CURRENT NOISE vs FREQUENCY 0.4 2.0 AMPLITUDE (V) AMPLITUDE (V) 0.2 TFALL=2.02ns 0.0 TRISE=2.12ns -0.2 VS=5V AV=+10 RG=25 RL=500 CL=+1pF VOUT=500mV 1.0 TFALL=2.05ns 0.0 TRISE=2.02ns -1.0 VS=5V AV=+10 RG=25 RL=500 CL=1pF VOUT=2.0V -0.4 -40 -20 0 20 40 60 80 100 120 140 160 180 TIME (ns) -2.0 -40 -20 0 20 40 60 80 100 120 140 160 180 TIME (ns) FIGURE 29. SMALL SIGNAL STEP RESPONSE_RISE & FALL TIME FIGURE 30. LARGE SIGNAL STEP RESPONSE_RISE & FALL TIME 7 EL5132, EL5133 Typical Performance Curves (Continued) 12.0 SUPPLY CURRENT (mA) 11.8 11.6 11.4 11.2 11.0 10.8 10.6 10.4 10.2 10.0 2.5 3.0 Please note that the curve showed positive current. The negative current was almost the same. 3.5 4.0 4.5 5.0 SUPPLY VOLTAGE (V) 5.5 6.0 1200 1100 1000 SLEW RATE (V/s) 900 800 700 600 500 400 300 2.0 2.5 AV=+10 RG=25 RL=500 CL=+1pF VOUT=4Vp-p 3.0 3.5 4.0 4.5 5.0 SUPPLY VOLTAGES (V) 5.5 6.0 NEGATIVE SLEW RATE RG=25 RL=500 CL=+1pF POSITIVE SLEW RATE FIGURE 31. SUPPLY CURRENT vs SUPPLY VOLTAGE FIGURE 32. SLEW RATE vs SUPPLY VOLTAGES 1.4 POWER DISSIPATION (W) 1.2 JEDEC JESD51-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD POWER DISSIPATION (W) 1 0.9 0.8 JEDEC JESD51-3 LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 1 909mW 0.8 0.6 0.4 0.2 0 0 435mW SO8 JA=110C/W 0.7 625mW 0.6 0.5 0.4 0.3 0.2 0.1 0 0 SOT23-5 JA=256C/W 25 50 75 85 100 125 150 391mW SO8 JA=160C/W SOT23-5 JA=230C/W 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) FIGURE 33. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE FIGURE 34. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE 8 EL5132, EL5133 Typical Performance Curves (Continued) DIFFERENTIAL GAIN (%) 0.20 0.15 0.05 0 -0.05 -0.15 -0.20 0 10 20 30 40 50 60 70 80 90 100 FIGURE 35. DIFFERENTIAL GAIN (%) DIFFERENTIAL PHASE () 0.20 0.15 0.05 0 -0.05 -0.15 -0.20 0 10 20 30 40 50 60 70 80 90 100 FIGURE 36. DIFFERENTIAL PHASE () All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 9 |
Price & Availability of EL5132
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |