 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RO-P-DS-3004 - - X-Band Gain/Phase Control MMIC 8.0 -11.0 GHz MA03501D Features 8.0 to 11.0 GHz Operation 6-bit Phase Shifter and 5-bit Attenuator Serial Control Input 50 Input and Output Impedance Self-Aligned MSAG(R) MESFET Process 8.0-11.0 GHz Serial Input Control MMIC Primary Applications Radar Systems Description The MA03501D is a serial control input phase shifter/ attenuator/buffer amplifier MMIC. The on-chip serial to parallel converter circuitry allows for control of the 6 phase and 5 attenuation bits using a single TTL/CMOS compatable input. This product is fully matched to 50 ohms on both the input and output. Each device is 100% RF tested on wafer to ensure performance compliance. The part is fabricated using M/A-COM's repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate (MSAG(R)) MESFET Process. Electrical Characteristics: TB = 25C1, Z0 = 50, VDD = 5V, VGG = -4V, VEE = -4.0 Parameter Bandwidth Gain 1-dB Compression Point Input Return Loss Output Return Loss Attenuation Range (5-bits, 0.75dB step) RMS Attenuation Error (Uncorrected) 0.75 dB Attenuator Bit 1.5 dB Attenuator Bit 3 dB Attenuator Bit 6 dB Attenuator Bit 12 dB Attenuator Bit 1. TB = MMIC Base Temperature 0.5 1.0 2.4 5.0 10.8 Symbol f Gn P1dB IRL ORL 10 10 Minimum 8.0 13 18 21 16 16 23 0.2 0.8 1.5 3.0 6.0 12 1.0 2.0 3.6 7.0 13.2 Typical Maximum 11.0 22.5 Units GHz dB dBm dB dB dB dB dB dB dB dB dB RO-P-DS-3004 - - 2/7 X-Band Serial Input Gain/Phase Control MMIC MA03501D Electrical Characteristics: TB = 25C, Z0 = 50, VDD = 5V, VGG = -4V, VEE = -4.0 Parameter Phase Shift Range (6 bits, 5.6 degree step) RMS Phase Error (Uncorrected) 5.6 Degree Bit 11.25 Degree Bit 22.5 Degree Bit 45 Degree Bit 90 Degree Bit 180 Degree Bit Gain Variation over all Phase Shifter settings Output Third Order Intercept Point Noise Figure Drain Supply Current Gate Supply Current Digital Power Supply Current Input Logic High Current Input Logic Low Current Timing Delay-Enable Signal to Bit Change OTOI NF IDD IGG IEE 160 4.0 8.0 19.0 40.0 85.0 170 Symbol Minimum Typical 354 2 5.3 11.0 22.0 44.0 90.0 180 +/-1.0 26 10 275 1 10 0.5 0.1 25 500 10 20 7.0 13.0 24.0 47.0 95.0 190 Maximum Units Deg Deg Deg Deg Deg Deg Deg Deg dB dBm dB mA mA mA mA mA nS Absolute Maximum Conditions 1 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF) Quiescent DC Power Dissipated (No RF) Digital Power Supply Voltage Junction Temperature Storage Temperature Symbol PIN VDD VGG IDQ PDISS VEE Tj TSTG Absolute Maximum 12 8.0 -6.0 500 2.5 -6.0 180 -55 to +150 Units dBm V V mA W V C C 1. Operation outside of these ranges may reduce product reliability. Operation at other than the typical values may result in performance outside the guaranteed limits. Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 V 1.00 Visit www.macom.com for additional data sheets and product information. RO-P-DS-3004 - - 3/7 X-Band Serial Input Gain/Phase Control MMIC Recommended Operating Conditions Characteristic Drain Voltage Gate Voltage Digital Power Supply Voltage Input Logic High Voltage Input Logic Low Voltage Clock Frequency Junction Temperature MMIC Base Temperature Symbol VDD VGG VEE VIH VIL FCLK TJ TB Min 4.0 -4.5 -4.2 3.0 0.0 Typ 5.0 -4.0 -4.0 3.5 0.0 20 150 Note 2 Max 6.0 -3.5 -3.8 5.0 0.4 MA03501D Unit V V V V V MHz C C 2. Maximum MMIC Base Temperature = 150C-- 31.8C/W * VDD * IDQ Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG = -4 V, VEE = -4V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 5 V. 3. Adjust VGG to set IDQ, (approximately @ -4V). 4. Set RF input. 5. Power down in reverse. Turn gate voltage off last. Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 V 1.00 Visit www.macom.com for additional data sheets and product information. RO-P-DS-3004 - - 4/7 X-Band Serial Input Gain/Phase Control MMIC Typical Small Signal Characteristics (VDD=5V, VGG=-4V) MA03501D 22.0 21.0 20.0 Gain S21 (dB) 19.0 18.0 17.0 16.0 15.0 14.0 8.0 8.5 9.0 9.5 Frequency (GHz) 10.0 10.5 11.0 Figure 1. Gain Input and Output Return Loss S11 and S22 (dB) -10.0 S22: -12.0 -14.0 -16.0 -18.0 -20.0 -22.0 -24.0 8.0 8.5 9.0 9.5 Frequency (GHz) 10.0 S11: 10.5 11.0 Figure 2. Input and Output Match Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 V 1.00 Visit www.macom.com for additional data sheets and product information. RO-P-DS-3004 - - 5/7 X-Band Serial Input Gain/Phase Control MMIC MA03501D 0.45 0.40 RMS Attenuation Error (dB) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 8.0 8.5 9.0 9.5 Frequency (GHz) 10.0 10.5 11.0 Figure 3. RMS Attenuation Error 4.5 4.0 RMS Phase Error (degree) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 8.0 8.5 9.0 9.5 Frequency (GHz) 10.0 10.5 11.0 Figure 4. RMS Phase Error Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 V 1.00 Visit www.macom.com for additional data sheets and product information. RO-P-DS-3004 - - 6/7 X-Band Serial Input Gain/Phase Control MMIC MA03501D Mechanical Information Chip Size: 5.974 x 3.973 x 0.075 mm 0.152mm. 0.547mm. (236 x 157 x 3 mils) 5.974mm. 5.824mm. 3.973mm. 3.820mm. IN VGG 3.222mm. 2.485mm. 2.186mm. 1.886mm. 1.586mm. 1.287mm. VEE + CK DA LD GND VDD 0.751mm. 0.150mm. 0 0 OUT Bond Pad Dimensions Pad RF In and Out DC Supply Voltages DC Control Voltages Size (m) 150 x 150 150 x 150 150 x 150 Size (mils) 6x6 6x6 6x6 Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 0.547mm. V 1.00 Visit www.macom.com for additional data sheets and product information. 5.824mm. RO-P-DS-3004 - - 7/7 X-Band Serial Input Gain/Phase Control MMIC Assembly and Bonding Diagram VGG 0.1 F VGG VDD MA03501D 100 pF 100 pF 0.1 F VDD RFIN OUT RFOUT IN GND VEE CK DA LD 3 100 pF 0.1 F DATA VEE Figure 5. Recommended bonding diagram. Support circuitry typical of MMIC characterization fixture for CW testing. Assembly Instructions: Die attach: Use AuSn (80/20) 1-2 mil. preform solder. Limit time @ 300 C to less than 5 minutes. Wirebonding: Bond @ 160 C using standard ball or thermal compression wedge bond techniques. For DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge bonds of shortest length, although ball bonds are also acceptable. Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent damage to amplifier. Specifications subject to change without notice. Customer Service: Tel. (888)563-3949 Email: macom_adbu_ics@tycoelectronics.com North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 V 1.00 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MA03501D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |