 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBR16XX, MBRF16xx & MBRB16xx Series Reverse Voltage 35 to 60 Volts Schottky Barrier Rectifiers Forward Current 16.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 250C/10 seconds, 0.25" (6.35mm) from case Mechanical Data Case: JEDEC TO-220AC, ITO-220AC & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 ounce, 2.24 grams TO-220AC ITO-220AC TO-263AB(D2PAK) Mounting Pad Layout TO-263AB Dimensions in inches and (millimeters) 366 Maximum Ratings and Electrical Characteristics ( TC = 25oC unless otherwise noted ) Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=125oC Peak repetitive forward current (rated VR, sq. wave, 20KHz) at TC=125oC Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse current at tp = 2.0us, 1KHz Voltage rate of change (rated VR) Maximum instantaneous forward voltage (Note 4) at IF=16A, TC=25oC at IF=16A, TC=125oC Maximum instantaneous reverse current at rated DC blocking voltage (Note 4) TC=25oC TC=125oC IR 40 RJC VISOL TJ TSTG 50 o Symbol VRRM VRWM V DC IF(AV) IFRM IFSM IRRM dv/dt MBR1635 35 35 35 MBR1645 45 45 45 16 32 150 1.0 MBR1650 50 50 50 MBR1660 60 60 60 Unit Volts Volts Volts Amps Amps Amps 0.5 1,000 Amps V/us 10,000 VF 0.63 0.57 0.2 0.75 0.65 1.0 Volt mA Typical thermal resistance from junction to case RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH < 30% Operating junction temperature range Storage temperature range Notes: MBR 1.5 / MBRF 3.0 / MBRB 1.5 4500 (Note 1) 3500 (Note 2) 1500 (Note 3) -55 to +150 -55 to +150 C/W Volts o C C o 1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset 2. Clip mounting (on case), where leads do overlap heatsink 3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19") 4. Pulse test: 300us pulse width, 1% duty cycle 367 RATINGS AND CHARACTERISTIC CURVES ( TA = 25oC unless otherwise noted ) 368 |
Price & Availability of MBR16XX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |