View APL1117D-33UC-TU_644820.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APL1117D/R
1A, Low Dropout Fast Response Positive Regulator Fixed 3.3V and 5.0V
Features
* * * * * * * * *
Guaranteed Output Voltage Accuracy within 2% Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation : 0.1% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage : 1.2V Typ. at IOUT =0.8A Current Limit : 1A Typ. at TJ=125 C On-Chip Thermal Limiting : 150 C Typ. Standard 3-pin SOT-223 and TO-252 Power Packages
General Description
The APL1117D/R is a low dropout three-terminal fixed 3.3V and 5.0V regulators with 1A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1117D/R has been optimized. The dropout voltage is guaranteed at a maximum of 1.3V at 0.8A. Current limit is trimmed to ensure specified output current and controlled shortcircuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1117D/R is available in the industry standard 3pin SOT-223 and TO-252 the low profile surface mount packages which can be used in applications where space is limited.
Pin Description Applications
* * * *
Active SCSI Terminators Low Voltage Logic Supplies Battery-Powered Circuitry Post Regulator for Switching Power Supply APL1117D APL1117R GND VOUT VIN VIN GND VOUT Front View for TO-252
1 2 3
Front View for SOT-223
1
2
3
APL1117D APL1117R
GND VOUT VIN VIN GND VOUT
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 1 www.anpec.com.tw
APL1117D/R
Ordering and Marking Information
A P L 1 1 1 7 D /R L e a d F re e C o d e H a n d lin g C o d e Tem p. R ange Package Code V o lta g e C o d e Package Code U : T O -2 5 2 V : S O T -2 2 3 Tem p. R ange C : 0 to 7 0 C H a n d lin g C o d e TU : Tube TR : Tape & Reel V o lta g e C o d e 3 3 : 3 .3 V 5 0 : 5 .0 V L e a d F re e C o d e L : L e a d F re e D e v ic e B la n k : O rig in a l D e v ic e A P L 1 1 1 7 D /R XXXXX33
A P L 1 1 1 7 D /R -3 3 U :
33 A P L 1 1 1 7 D /R XXXXX 50
XXXXX
- D a te C o d e
A P L 1 1 1 7 D /R -3 3 U :
X X X X X - D a te C o d e
A P L 1 1 1 7 D /R -5 0 U :
A P L 1 1 1 7 D /R XXXXX
XXXXX
- D a te C o d e
A P L 1 1 1 7 D /R -5 0 U :
A P L 1 1 1 7 D /R XXXXX50
X X X X X - D a te C o d e
Absolute Maximum Ratings
Symbol VI TJ Parameter Input Voltage Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering, 10 second) Rating 13.2 0 to 125 0 to 150 -65 to +150 260 Unit V C
TSTG TL
C C
Electrical Characteristics
Symbol V OUT Parameter Test Conditions APL1117D/R Unit Min. Typ. Max. 3.235 3.300 3.365 V 4.900 5.000 5.100 1 1 1.2 1 60 75 0.01 0.5 TJ=125C, 1000Hrs
2
APL1117D/R-33 T J =0~125C, APL1117D/R-50 0IOUT0.8A, 4.75VVIN12V REGLINE Line Regulation T J =0~125C, IOUT=0.8A, 4.75VVIN7.75V (Note1) REGLOAD Load Regulation T J =0~125C, VIN=4.75A, 0VIOUT0.8A (Note1) VD ILIMT PSRR TR TS LS Dropout Voltage Current Lim it Ripple Rejection I OUT 0.8A,TJ=0~125C (VIN-VOUT)=5V, TJ=25C FRIPPLE=120Hz, VRIPPLE=1VP-P (VIN-VOUT)=3V,TJ=0~125C
6 10 1.3
mV mV V A dB %/W % %
Thermal Regulation TJ=25C, 30ms Pulse Temperature Stability Long -Term Stability
0.3
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
www.anpec.com.tw
APL1117D/R
Electrical Characteristics
Symbol VN th OT Parameter RMS Output Noise Test Conditions T J=25C,10HzF10kHz, (% of V OUT ) APL1117D/R Unit Min. Typ. Max. 0.003 15 50 150 5.5 10 % C/ W C mA
Thermal Resistance Junction to Case, at Tab Junction to ambient Over Temperature Point Quiescent Current T J=0~125C, V IN 12V
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 2: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/ output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve. Note 3: Minimum load current is defined as the minimum output current required to maintain regulation.
Application Schematic
VIN=5~12V
APL1117D/R
VOUT
+ CIN
10uF
+ COUT1
0.1uF
+ COUT2
10uF
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
3
www.anpec.com.tw
APL1117D/R
Typical Characteristics
Input Current vs. Temperature
8
Current Limit vs. Temperature
Vout=3.3V
1.3
Vout=3.3V
7
1.2
Input Current (mA)
Current Limit (mA)
6
1.1
5
1
4
Vin-Vout=5V
0.9
3
0.8
2 -5 0 -2 5 0 25 50 75 1 00 1 25
0.7 -50
-30
-10
10
30
50
70
90
110
130
150
Temperature (C)
Temperature (C)
Load Transient Response
5 4.5
Line Transient Response
Vout=3.3V
0.02
Vout=3.3V
6
0.15
Output Voltage Deviation (V)
Output Current (A)
Input Voltage (V)
3.5 3 2.5 2 1.5 1 0.5 0 -100 0 100 200 300 400 500 600 700 800 -0.03 900 0
0.1 4
3
CIN=10uF Cout=10uF Tantalum V IN=5V
CIN=10uF Cout=10uF Tantalum IOUT=0.1A
0.05
-0.01
2 0 1 -0.05 -20 30 80 130 180
-0.02
0
Time (s)
Time (s)
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
4
www.anpec.com.tw
Output Voltage Deviation (V)
4
0.01
5
APL1117D/R
Typical Characteristics
Dropout Voltage vs. Output Current
1.3
Output Voltage vs. Input Voltage
3.5
Vout=3.3V
Vout=3.3V
1.25
3
Dropout Voltage (V)
1.2
Outputt Voltage (V)
0 0.2 0.4 0.6 0.8 1
2.5
1.15 1.1
2
1.5
1.05 1
1
0.95 0.9
0.5
0 0 1 2 3 4 5 6 7 8 9
Output Current (A)
Iutput Voltage (V)
Input Current vs. Input Voltage
6
Vout=3.3V
Current Limit vs. Input Voltage
1.12
Vout=3.3V
5
1.1
Input Current (mA)
Current Limit (A)
4
1.08
3
1.06
2
1.04
1
1.02
0 0 2 4 6 8 10
1 4 5 6 7 8 9 10 11 12 13
Input Voltage (V)
Input Voltage (V)
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
5
www.anpec.com.tw
APL1117D/R
Typical Characteristics Cont.
Output Voltage vs. Temperature
3.6 Vout=3.3V
3.5
Output Voltage (V)
3.4
3.3
3.2
3.1
3 -50 -25 0 25 50 75 100 125
Temperature (C)
Copyright ANPEC Electronics Corp. 6 Rev. A.3 - Jun., 2003
6
www.anpec.com.tw
APL1117D/R
Package Information
SOT-223( Reference JEDEC Registration SOT-223)
D B1
A c
a
H
E L K e e1 b A1
B
Dim A A1 B B1 c D E e e1 H L K Min. 1.50 0.02 0.60 2.90 0.28 6.30 3.30
Millimeters Max. 1.80 0.08 0.80 3.10 0.32 6.70 3.70 2.3 BSC 4.6 BSC 6.70 0.91 1.50 0 13 7.30 1.10 2.00 10 0.26 0.04 0.06 0 Min. 0.06 0.02 0.11 0.01 0.25 0.13
Inches Max. 0.07 0.03 0.12 0.01 0.26 0.15 0.09 BSC 0.18 BSC 0.29 0.04 0.08 10 13
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
7
www.anpec.com.tw
APL1117D/R
Package Informaion
TO-252( Reference JEDEC Registration TO-252)
E b2 L2 A C1
D H
L1 L b e1 D1 C A1
E1
Dim A A1 b b2 C C1 D D1 E E1 e1 H L L1 L2
M illim et er s M in. 2. 1 8 0. 8 9 0. 5 08 5. 2 07 0. 4 6 0. 4 6 5. 3 34 5. 2 R EF 6. 3 5 5. 3 R EF 3. 9 6 9. 3 98 0. 5 1 0. 6 4 0. 8 9 1. 0 2 2. 0 32
8
Inc he s M ax. 2. 3 9 1. 2 7 0. 8 9 5. 4 61 0. 5 8 0. 5 8 6. 2 2 6. 7 3 5. 1 8 10 . 41 M in. 0. 0 86 0. 0 35 0. 0 20 0. 2 05 0. 0 18 0. 0 18 0. 2 10 0. 2 05 R EF 0. 2 50 0. 2 09 R EF 0. 1 56 0. 3 70 0. 0 20 0. 0 25 0. 0 35 0. 0 40 0. 0 80
www.anpec.com.tw
M ax. 0. 0 94 0. 0 50 0. 0 35 0. 2 15 0. 0 23 0. 0 23 0. 2 45 0. 2 65 0. 2 04 0. 4 10
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
APL1117D/R
Physical Specifications
Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3.
Reflow Condition
TP
(IR/Convection or VPR Reflow)
tp C ritical Zone T L to T P
R am p-up
T e m p e ra tu re
TL T sm ax
tL
T sm in R am p-down ts Preheat
25
t 25 C to Peak
T im e
Classificatin Reflow Profiles
Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Pb-Free Assembly Large Body Small Body 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds 245 +0/-5C 250 +0/-5C 10-30 seconds 20-40 seconds
Average ramp-up rate 3C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100C - Temperature Mix (Tsmax) 150C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5C 240 +0/-5C Time within 5C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6C/second max. 6 minutes max. Time 25C to Peak Temperature
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 9
6C/second max. 8 minutes max.
www.anpec.com.tw
Note: All temperatures refer to topside of the package. Measured on the body surface.
APL1117D/R
Reliability Test Program
Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C, 5 SEC 1000 Hrs Bias @125C 168 Hrs, 100%RH, 121C -65C~150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA
Carrier Tape
t P P1 D
Po E
F W
Bo
Ao
Ko D1
T2
J C A B
T1
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
10
www.anpec.com.tw
APL1117D/R
Carrier Tape
Application TO-252 Application TO-252 Application SOT-223 Application SOT-223 A 3303 F 7.5 0.1 A 3301 F 5.5 0.05 B 100 2 D 1.5 0.1 B 621.5 D 1.5+ 0.1 C 13 0. 5 D1 1.5+ 0.25 C 12.75 0.15 D1 1.5+ 0.1 J 2 0.5 Po 4.0 0.1 J 2 0.6 Po T1 16.4 +0.3 -0.2 P1 2.0 0.1 T1 12.4 +0.2 P1 T2 2.5 0.5 Ao 6.8 0.1 T2 2 0.2 Ao W 16 + 0.3 16 - 0.1 Bo 10.4 0.1 W 12 0.3 Bo 7.5 0.1 P 8 0.1 Ko 2.5 0.1 P 8 0.1 Ko 2.1 0.1 E 1.75 0.1 t 0.30.05 E 1.75 0.1 t 0.30.05
4.0 0.1 2.0 0.05 6.9 0.1
(mm)
Cover Tape Dimensions
Application SOT- 223 TO- 252 Carrier Width 12 16 Cover Tape Width 9.3 13.3 Devices Per Reel 2500 2500
Customer Service
Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369
Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003
11
www.anpec.com.tw

▲Up To Search▲

Price & Availability of APL1117D-33UC-TU

	To Download APL1117D-33UC-TU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .