|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HANBit HMD8M32M4G 32Mbyte(8Mx32) 72-pin SIMM, FP Mode, 4K Ref. 5V Part No. HMD8M32M4, HMD8M32M4G GENERAL DESCRIPTION The HMD8M32M4 is a 8M x 32bit dynamic RAM high density memory module. The module consists of four CMOS 4M x 16 bit DRAMs in 50-pin TSOP packages mounted on a 72-pin, double-sided, FR-4-printed circuit board. A 0.1uF or 0.22uF decoupling capacitor is mounted on the printed circuit board for each DRAM components. The module is a single In-line memory module with edge connections and is intended for mounting in to 72-pin edge connector sockets. All module components may be powered from a single 5V DC power supply and all inputs and outputs are TTL-compatible. FEATURES w Part Identification HMD8M32M4----4K Cycles/64ms Ref, Solder HMD8M32M4G- 4K Cycles/64ms Ref, Gold w Access times : 50, 60ns w High-density 32MByte design w Single +5V 0.5V power supply w JEDEC Standard pinout w Fast Page mode operation w TTL compatible inputs and outputs w FR4-PCB design PIN 1 2 3 4 5 6 7 8 9 PIN ASSIGNMENT SYMBOL Vss DQ0 DQ16 DQ1 DQ17 DQ2 DQ18 DQ3 DQ19 Vcc NC A0 A1 A2 A3 A4 A5 A6 A10 DQ4 DQ20 DQ5 DQ21 DQ6 PIN 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SYMBOL DQ22 DQ7 DQ23 A7 A11 Vcc A8 A9 NC NC NC NC NC NC Vss /CAS0 /CAS2 /CAS3 /CAS1 /RAS0 /RAS1 NC /WE NC PIN 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 SYMBOL DQ8 DQ24 DQ9 DQ25 DQ10 DQ26 DQ11 DQ27 DQ12 DQ28 Vcc DQ29 DQ13 DQ30 DQ14 DQ31 DQ15 NC PD1 PD2 PD3 PD4 NC Vss OPTIONS w Timing 50ns access 60ns access w Packages 72-pin SIMM MARKING -5 -6 10 11 12 13 14 15 16 17 18 60ns NC Vss NC NC 19 20 21 22 23 24 M PRESENCE DETECT PINS Pin PD1 PD2 PD3 PD4 50ns NC Vss Vss Vss PERFORMANCE RANGE Speed 5 6 tRAC 50ns 60ns tCAC 13ns 15ns tRC 90ns 110ns URL:www.hbe.co.kr REV.1.0 (August.2002) -1- HANBit Electronics Co.,Ltd. HANBit FUNCTIONAL BLOCK DIAGRAM HMD8M32M4G U1 /RAS0 /RAS /CAS0 /LCAS DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ0-15 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 U4 /RAS /RAS1 /CAS0 /LCAS /CAS1 /UCAS DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 A0-A11 DQ15 /UCAS DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 /CAS1 /OE /OE /W /W A0-A11 U3 /RAS /RAS0 /LCAS /CAS2 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 U6 /RAS /RAS1 /CAS2 /LCAS /UCAS /CAS3 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 A0-A11 DQ15 DQ16-31 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 /UCAS /CAS3 /OE /OE /W /WE A0-A11 /W A0-A11 Vcc Vss 0.1uFor0.22uFCapacitor foreachDRAM To all DRAMs URL:www.hbe.co.kr REV.1.0 (August.2002) -2- HANBit Electronics Co.,Ltd. HANBit ABSOLUTE MAXIMUM RATINGS PARAMETER Voltage on Any Pin Relative to Vss Voltage on Vcc Supply Relative to Vss Power Dissipation Storage Temperature SYMBOL VIN ,OUT Vcc PD TSTG HMD8M32M4G RATING -1V to 7.0V -1V to 7.0V 4W -55oC to 150oC Short Circuit Output Current IOS 50mA w Permanent device damage may occur if " Absolute Maximum Ratings" are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. RECOMMENDED DC OPERATING CONDITIONS ( Voltage reference to VSS, TA=0 to 70 o C ) PARAMETER Supply Voltage Ground Input High Voltage Input Low Voltage SYMBOL Vcc Vss VIH VIL MIN 4.5 0 2.4 -1.0 TYP. 5.0 0 MAX 5.5 0 Vcc+1 0.8 UNIT V V V V DC AND OPERATING CHARACTERISTICS SYMBOL ICC1 -6 ICC2 ICC3 -6 -5 ICC4 -6 ICC5 ICC6 -6 Il(L) IO(L) VOH VOL ICC2 : Standby Current ( /RAS=/CAS=VIH ) ICC3 : /RAS Only Refresh Current * ( /CAS=V IH, /RAS, Address cycling @tRC=min ) URL:www.hbe.co.kr REV.1.0 (August.2002) SPEED -5 MIN - MAX 736 656 UNITS Ma Ma Ma MA MA MA MA MA MA MA A A V V Don't care -5 -20 -20 2.4 - 32 736 656 656 576 16 736 656 80 10 0.4 Don't care -5 ICC1 : Operating Current * (/RAS , /CAS , Address cycling @t RC=min.) -3- HANBit Electronics Co.,Ltd. HANBit ICC4 : Fast Page Mode Current * (/RAS=VIL, /CAS, Address cycling @tPC=min ) ICC5 : Standby Current (/RAS=/CAS=Vcc-0.2V ) ICC6 : /CAS-Before-/RAS Refresh Current * (/RAS and /CAS cycling @t RC=min ) IIL : Input Leakage Current (Any input 0V VIN 6.5V, all other pins not under test = 0V) IOL : Output Leakage Current (Data out is disabled, 0V VOUT 5.5V VOH : Output High Voltage Level (IOH= -5mA ) VOL : Output Low Voltage Level (IOL = 4.2mA ) HMD8M32M4G * NOTE: ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1 and ICC3, address cad be changed maximum once while /RAS=VIL. In ICC4, address can be changed maximum once within one page mode cycle. o CAPACITANCE ( TA=25 C, Vcc = 5V, f = 1Mz ) SYMBOL CIN1 C IN2 CIN3 CIN4 CDQ1 o DESCRIPTION Input Capacitance (A0-A11) Input Capacitance (/W) Input Capacitance (/RAS0) Input Capacitance (/CAS0-/CAS3) Input/Output Capacitance (DQ0-31) MIN - MAX 100 130 40 30 20 UNITS PF PF pF pF pF AC CHARACTERISTICS ( 0 C TA 70oC , Vcc = 5V10%, See notes 1,2.) -5 -6 UNIT MIN MAX MIN 110 50 13 25 0 0 3 30 50 13 50 13 20 15 5 0 10 10K 37 25 10K 13 50 0 0 3 40 60 15 60 15 20 15 5 0 10 10K 45 30 10K 13 50 60 15 30 MAX ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns HANBit Electronics Co.,Ltd. STANDARD OPERATION Random read or write cycle time Access time from /RAS Access time from /CAS Access time from column address /CAS to output in Low-Z Output buffer turn-off delay Transition time (rise and fall) /RAS precharge time /RAS pulse width /RAS hold time /CAS hold time /CAS pulse width /RAS to /CAS delay time /RAS to column address delay time /CAS to /RAS precharge time Row address set-up time Row address hold time URL:www.hbe.co.kr REV.1.0 (August.2002) SYMBOL tRC tRAC tCAC tAA tCLZ tOFF tT tRP tRAS tRSH tCSH tCAS tRCD tRAD tCRP tASR tRAH 90 -4- HANBit Column address set-up time Column address hold time Column Address to /RAS lead time Read command set-up time Read command hold referenced to /CAS Read command hold referenced to /RAS Write command hold time Write command pulse width Write command to /RAS lead time Write command to /CAS lead time Data-in set-up time Data-in hold time Refresh period Write command set-up time /CAS setup time (C-B-R refresh) /CAS hold time (C-B-R refresh) /RAS precharge to /CAS hold time Access time from /CAS precharge Fast page mode cycle time /CAS precharge time (Fast page) /RAS pulse width (Fast page ) /W to /RAS precharge time (C-B-R refresh) /W to /RAS hold time (C-B-R refresh) /CAS precharge(C-B-R counter test) tASC tCAH tRAL tRCS tRCH tRRH tWCH tWP tRWL tCWL tDS tDH tREF tWCS tCSR tCHR tRPC tCPA tPC tCP tRASP tWRP tWRH tCPT 35 10 50 10 10 20 200K 0 5 10 5 30 45 10 60 10 10 30 0 10 25 0 0 0 10 10 15 13 0 10 64 0 5 10 5 0 10 30 0 0 0 10 10 15 15 0 15 HMD8M32M4G ns ns ns ns ns ns ns ns ns ns ns ns 64 ns ns ns ns ns 35 ns ns ns 200K ns ns ns ns NOTES 1.An initial pause of 200s is required after power-up followed by any 8 /RAS-only or /CAS-before-/RAS refresh cycles before proper device operation is achieved. 2.VIH (min) and VIL (max) are reference levels for measuring timing of input signals. Transition times are measured between VIH(min) and VIL(max) and are assumed to be 5ns for all inputs. 3.Measured with a load equivalent to 1TTL loads and 100pF 4.Operation within the tRCD(max) limit insures that tRAC(max) can be met. tRCD(max) is specified as a reference point only. If tRCD is greater than the specified tRCD(max) limit, then access time is controlled exclusively by tCAC. 5.Assumes that tRCD tRCD(max) 6. tAR, tWCR, tDHR are referenced to tRAD(max) 7.This parameter defines the time at which the output achieves the open circuit condition and is not referenced to V OH or VOL. 8. tWCS, tRWD, tCWD and tAWD are non restrictive operating parameter. They are included in the data sheet as electrical characteristic only. If t WCS tWCS(min) the cycle is an early write cycle and the data out pin will remain high impedance for the duration of the cycle. 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. These parameters are referenced to the /CAS leading edge in early write cycles and to the /W leading edge in readwrite cycles. 11. Operation within the tRAD(max) limit insures that tRAC(max) can be met. tRAD(max) is specified as a reference point only. If tRAD is greater than the specified tRAD(max) limit. then access time is controlled by tAA. URL:www.hbe.co.kr REV.1.0 (August.2002) -5- HANBit Electronics Co.,Ltd. HANBit TIMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE HMD8M32M4G /RAS VIHVILtCRP tRCD tRAD tASR tRAH tASC tRC tRAS tCSH tRSH tCAS tCAH COLUMN ADDRESS tRP tCRP /UCAS,/LCAS VIHVILVIHVILVIHROW ADDRESS tRAL tRCH A tRCS tAA tOEA tCAC tRAC OPEN tRRH /W V ILVIH/OE VILtCLZ VOHVOL- tOFF tOEZ tOEZ DATA-OUT DQ0-DQ15 TIMING WAVEFORM OF WRITE CYCLE (EARLY WRITE) NOTE : Dout = Open tRC /RAS VIHVILtCRP VIH/UCAS,/LCAS VILVIHAV ILROW ADDRESS tRAS tRCD tRAD tASR tRAH tASC tCAH COLUMN ADDRESS tRP tCSH tRSH tCAS tRAL tCRP tCWL tRWL tWCS tWP tWCH /W VIHVIL/OE VIHVIL- tDS DQ0-DQ15 VOHVOLDATA-IN tDH URL:www.hbe.co.kr REV.1.0 (August.2002) -6- HANBit Electronics Co.,Ltd. HANBit PACKAGING INFORMATION HMD8M32M4G 107.95 mm 101.19 mm 3.38 mm R1.57 mm R3.180.51m 18.52mm 10.16 mm 6.35 mm 2.03mm 6.35mm 6.35 mm 95.25 mm R1.5710 mm 7.68mm MAX 0.25 mm MAX 2.54 mm MIN Gold : 1.040.10 mm 1.27mm Solder:0.9140.10mm 1.290.08 mm ORDERING INFORMATION Part Number Density Org. Package Vcc SPEED HMD8M32M4G-5 HMD8M32M4G-6 32MByte 32MByte 8MX 32bit 8MX 32bit 72 Pin-SIMM 72 Pin-SIMM 5.0V 5.0V 50ns 60ns URL:www.hbe.co.kr REV.1.0 (August.2002) -7- HANBit Electronics Co.,Ltd. |
Price & Availability of HMD8M32M4G-5 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |