 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LOW PROFILE HIGH FREQUENCY RELAY RP-RELAYS 10.6 .417 9 .748 4 .157 * High frequency relay with the low profile of 4 mm .157 inch * Excellent high frequency characteristics Isolation: Min. 10dB (at 1.8 GHz) Insertion loss: Max. 1.0dB (at 1.8 GHz) V.S.W.R.: Max. 1.3 (at 1.8 GHz) * High sensitivity in small size Size: 10.6 x 9 x 4 mm .417 x .354 x .157 inch Nominal operating power: 140 mW mm inch SPECIFICATIONS Contact Arrangement Contact material Movable 1 Form C Silver alloy Gold-clad silver 50 m 0.1 A 30 V DC Contact switching power: 1 W (Max. 1.8 GHz); Contact carrying power: 3 W (Max. 1.2 GHz) 1 W (Max. 1.8 GHz) Min. 15 dB (at 1 GHz) Min. 10 dB (at 1.8 GHz) Max. 0.5 dB (at 1 GHz) Max. 1 dB (at 1.8 GHz) Max. 1.2 (at 1 GHz) Max. 1.3 (at 1.8 GHz) 5x106 105 (0.1 A 30 V DC) 105 (1 W at 1.8 GHz; V.S.W.R.: max. 1.3) Characteristics Max. operating speed (at rated load) Initial insulation resistance*1 Initial breakdown Between open contacts voltage*2 Between contacts and coil Operate time*3 (at nominal voltage) Release time(without diode)*3 (at nominal voltage) Temperature rise Functional*4 Destructive* Functional*6 Destructive Conditions for operation, transport and storage Ambient temp. 5 20 cpm Min. 1,000 M at 500 V DC 750 Vrms for 1 min. 1,500 Vrms for 1 min. Max. 3 ms (Approx. 1.5 ms) Max. 2 ms (Approx. 1 ms) Max. 50Cwith nominal coil voltage across coil and at nominal switching capacity Min. 500 m/s2 {50 G} Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to 70C -40F to 158F 5 to 85% R.H. Approx. 1 g .04 oz Stationary Initial contact resistance, max. (By voltage drop 6 V DC 0.1 A) Nominal switching capacity Rating Isolation High frequency characteristics (Impedance 50) Insertion loss V.S.W.R. Mechanical (at 180 cpm) Electrical (at 20 cpm) Shock resistance Vibration resistance Expected life (min. operations) Coil (at 25C, 68F) Voltage type 1.5 to 12 V DC 24 V DC Nominal operating power 140 mW 270 mW (Not freezing and condensing Humidity at low temperature) Unit weight Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s TYPICAL APPLICATIONS * Antenna switching of mobile phone * Switching signal of measuring equipment ORDERING INFORMATION Ex. RP 1 H 3V Contact arrangement 1:1 Form C Terminal shape Nil: Standard PC board terminal H: Self-clinching terminal Coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Note: Standard packing; Carton: 50 pcs. Case 1,000 pcs. 93 RP TYPES ANE COIL DATA (at 20C 68F) Part No. Standard PC board terminal RP1-1.5V RP1-3V RP1-4.5V RP1-5V RP1-6V RP1-9V RP1-12V RP1-24V Self-clinching terminal RP1-H-1.5V RP1-H-3V RP1-H-4.5V RP1-H-5V RP1-H-6V RP1-H-9V RP1-H-12V RP1-H-24V Nominal voltage, V DC 1.5 3 4.5 5 6 9 12 24 Pick-up voltage, max. V DC 1.125 2.25 3.375 3.75 4.5 6.75 9 18 Drop-out voltage, min. V DC 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 16 64.3 145 178 257 579 1,028 2,133 Nominal operating current, mA (10%) 93.8 46.7 31.1 28 23.3 15.6 11.7 11.3 Nominal operating power, mW 140 140 140 140 140 140 140 270 Maximum. allowable voltage, V DC 2.25 4.5 6.75 7.5 9 13.5 18 28.8 mm inch Standard PC board terminal 3.75 .148 4 .157 3.5 .138 10.6 .417 9 .354 DIMENSIONS PC board pattern (Copper-side view) 5.08 .200 2.54 .100 7.62 .300 (0.25) (.010) 2.54 .100 0.5 .020 2.54 .100 7.62 .300 0.25 .010 6-1 dia. 6-.039 dia. Self-clinching terminal 3.75 .148 4 .157 3.5 .138 10.6 .417 9 .354 Tolerance: 0.1 .004 Schematic (Bottom view) 123 + - (0.25) (.010) 2.54 .100 0.5 .020 2.54 .100 7.62 .300 0.25 .010 654 Direction indication General tolerance: 0.3 .012 Deenergized condition REFERENCE DATA Sample: RP1-6V Measuring method: Impedance 50 Measuring tool: 6-1.60 dia .063 dia 6-1.00 dia .039 dia 26-0.80 dia .031 dia 6-2.30 dia .090 dia 1.94 .076 4.22 9.82 .166 .387 mm inch PC board * Double-sided through hole * Material: Glass-epoxy resin * t= 1.0mm .039 inch * Copper plated thickness: 35 m 1. High frequency characteristics * Isolation 100 90 80 Isolation, dB 70 60 50 40 30 20 0.60 .024 18.92 .745 18.00 7.62 .709 .300 5.08 .200 10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Frequency, GHz Soldering SMA connector * Insertion loss 5 * Return loss 100 90 * V.S.W.R 3.0 2.8 2.6 2.4 V.S.W.R. N.O. (Terminal Nos. 5-6) 2.2 2.0 1.8 1.6 1.4 N.C. (Terminal Nos. 4-5) 1.2 1.0 N.C. N.O. 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Frequency, GHz Insertion loss, dB Return loss, dB N.O. (Terminal Nos. 5-6) N.C. (Terminal Nos. 4-5) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Frequency, GHz 4 80 70 60 50 40 30 20 10 3 2 1 0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Frequency, GHz 94 RP 2. Coil temperature rise Sample: RP1-6V; No. of samples: n = 5 Carrying current: 0.1 A Ambient temperature: 25C 77F 100 90 Temperature rise, C 80 70 60 50 40 30 20 10 0 0 80 100 120 150 Coil applied voltage, %V 70 80 100 4 2 Max. Max. Min. Min. 120 150 Coil applied voltage, %V 4 2 0 Max. Min. Max. Min. 70 80 Time, ms 10 8 6 3. Operate/release time Sample: RP1-9V; No. of samples: n = 50 * With diode 12 Operate time Release time * Without diode 12 Operate time Release time 10 8 6 Time, ms 100 120 150 Coil applied voltage, %V 4. Mechanical life Sample: RP1-5V; No. of samples: n = 8 * Change of pick-up, drop-out voltage 12 Pick-up/drop-out voltage, V 5. Electrical life (0.1 A 30 V DC) Sample: RP1-6V; No. of samples: n = 6 * Change of pick-up/drop-out voltage 12 Pick-up/drop-out voltage, V Contact resistance, m 10 8 6 Pick-up voltage 4 2 Drop-out voltage 0 10 20 No. of operations, x104 30 0 10 20 No. of operations, x104 30 Max. Min. Max. Min. * Change of contact resistance 120 100 80 60 40 20 10 8 6 4 2 Pick-up voltage Max. Min. Max. Min. Max. Min. 50 Drop-out voltage 100 500 1,000 No. of operations, x104 6. Ambient temperature characteristics Sample: RP1-6V; No. of samples: n = 5 7. Contact resistance distribution (initial) Sample: RP1-6V; No. of samples: n = 25 Rate of change, % 50 40 20 Pick-up voltage 20 40 60 80 Ambient -20 temperature, C -40 Drop-out voltage Quantity 40 30 -40 -20 0 20 10 0 22 24 26 28 30 32 34 36 38 40 Contact resistance, m 8.-(1) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6 Rate of change, % 8.-(2) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6 Rate of change, % 8.-(3) Influence of adjacent mounting Sample: RP1-12V; No. of samples: n = 6 Rate of change, % 5 Pick-up voltage 0 -5 OFF 5 Pick-up voltage 0 -5 OFF OFF 5 Pick-up voltage 0 -5 OFF OFF OFF OFF Rate of change, % 5 Drop-out voltage 0 ON Rate of change, % Rate of change, % 5 Drop-out voltage 0 -5 0 ON ON 5 Drop-out voltage 0 -5 ON ON -5 ON ON 0 5 10 .197 .394 Inter-relay distance, (mm, inch) 5 10 .197 .394 Inter-relay distance, (mm, inch) 0 5 10 .197 .394 Inter-relay distance, (mm, inch) 95 RP 9. High frequency switching test (1.2 GHz, 1 W) Sample: RP1-6V; No. of samples: n = 6 Ambient temperature: 20C 68F * Change of pick-up/drop-out voltage * Change of contact resistance 120 Contact resistance, m 100 80 60 40 Max. Min. 20 Max. Min. 0 5 10 15 0 5 10 No. of operations, x104 15 12 RP relay Transmission T1 T2 Dummy load (50) WD-2351 Transmission: RF Tranceiver IC-1201 (ICOH) Pick-up/drop-out voltage, V 10 8 6 Pick-up voltage 4 2 Drop-out voltage Max. Min. T1 T2 0.2s ON OFF 0.2s 1.5s 1.5s No. of operations, x104 NOTES 1. Packing direction Relays are packed in a tube with the orientation stripe (PIN NO. 1) toward the green stopper. Orientation (indicates PIN No. 1) stripe Stopper (green) Chucking pressure* in the direction B: 9.8 N {1 kgf} or less Chucking pressure* in the direction C: 9.8 N {1 kgf} or less Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. 3. Soldering Preheat according to the following conditions. Temperature Time 100C 212F or less Within 1 minute , , C Soldering should be done at 250C 482F within 5 s. 2. Automatic mounting To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure* in the direction A: 4.9 N {500 gf} or less A (4) (5) (6) mm inch B * Direction A * Direction B * Direction C 654 3 .118 6 .236 3 2 123 1 *Value of chucking pressure is shown by the value of weight pressed on the portion (4 mm .157 inch dia.). For Cautions for Use, see Relay Technical Information (Page 48 to 76). 96 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of RP1-H-24V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |