View SY10EP08VKG_664109.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ECL ProTM Micrel, Inc.
5V/3.3V DIFFERENTIAL 2-INPUT XOR/XNOR
SY10EP08V ECL ProTM SY10EP08V
FEATURES
3.3V or 5V power supply options Maximum frequency > 3GHz typical 200ps typical propagation delay Internal input resistors: pulldown on D, pulldown and pullup on /D Q output will default LOW with inputs open or at VEE Transistor count: 152 Available in 8-Pin MSOP and SOIC packages
ECL ProTM
DESCRIPTION
The SY10EP08V is a 2-input differential XOR/XNOR gate. The EP08V is ideal for applications requiring the fastest AC performance available.
PIN NAMES
Pin D0, D1, /D0, /D1 Q, /Q Function ECL Data Inputs ECL Data Outputs
TRUTH TABLE
D0 L L H H D1 L H L H /D0 H H L L /D1 H L H L Q L H H L /Q H L L H
ECL Pro is a trademark of Micrel, Inc. M9999-112805 hbwhelp@micrel.com or (408) 955-1690
Rev.: D Amendment: /0
1
Issue Date: November 2005
Micrel, Inc.
ECL ProTM SY10EP08V
PACKAGE/ORDERING INFORMATION
Ordering Information(1)
D0 1 /D0 2 D1 3 /D1 4 8 VCC 7Q 6 /Q 5 VEE
Part Number SY10EP08VZC SY10EP08VZCTR(2) SY10EP08VKC SY10EP08VKCTR(2) Package Type Z8-1 Z8-1 K8-1 K8-1 Z8-1 Z8-1 K8-1 K8-1 Z8-1 Z8-1 K8-1 K8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEP08V HEP08V HP08 HP08 HEP08V HEP08V HP08 HP08 HEP08V with Pb-Free bar-line indicator HEP08V with Pb-Free bar-line indicator HP08 with Pb-Free bar-line indicator HP08 with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu
Available in 8-Pin SOIC and MSOP Packages
SY10EP08VZI SY10EP08VZITR(2) SY10EP08VKI SY10EP08VKITR(2) SY10EP08VZG(3) SY10EP08VZGTR(2, 3) SY10EP08VKG(3) SY10EP08VKGTR(2, 3)
Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs.
M9999-112805 hbwhelp@micrel.com or (408) 955-1690
2
Micrel, Inc.
ECL ProTM SY10EP08V
ABSOLUTE MAXIMUM RATINGS(1)
Symbol VCC -- VEE VIN IOUT TLEAD TA Tstore JA Power Supply Voltage Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more positive than VCC) Output Current Lead Temperature (soldering, 20sec.) Operating Temperature Range Storage Temperature Range Package Thermal Resistance (Junction-to-Ambient) -Still-Air (SOIC) -500lfpm (SOIC) -Still-Air (MSOP) -500lfpm (MSOP) JC
Note 1.
Rating
Value 6V -6.0 to 0 +6.0 to 0 50 100 +260 -40 to +85 -65 to +150 160 109 206 155 39 39
Unit V V V mA C C C C/W C/W C/W
-Continuous -Surge
Package Thermal Resistance (Junction-to-Case)
(SOIC) (MSOP)
Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability.
3.3V LVPECL DC ELECTRICAL CHARACTERISTICS(1)
VCC = 3.3V 0.3V, VEE = 0V(2)
TA = -40C Symbol IEE VOH VOL VIH VIL VIHCMR IIH IIL
Note 1. Note 2. Note 3.
TA = +25C Min. 20 2230 1350 2155 1430 Typ. 30 2355 1555 -- -- Max. 38 2480 1680 2480 1755 Min. 20 2290 1350 2215 1490 36
TA = +85C Typ. 32 2415 1615 -- -- Max. 38 2540 1740 2540 1815 Unit mA mV mV mV mV V A A
Parameter Power Supply Current Output HIGH Voltage(3) Voltage(3)
Min. 20 2165 1350 2090 1365
Typ. 28 2290 1490 -- --
Max.
2415 1615 2415 1690
Outuput LOW
Input HIGH Voltage (Single-Ended) Input LOW Voltage (Single-Ended) Input HIGH Voltage Common Mode Range (Diff.) Input HIGH Current Input LOW Current D /D
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Input and output parameters vary 1:1 with VCC. All loading with 50 to VCC -2.0V.
M9999-112805 hbwhelp@micrel.com or (408) 955-1690
3
Micrel, Inc.
ECL ProTM SY10EP08V
5.0V PECL DC ELECTRICAL CHARACTERISTICS(1)
VCC = 5.0V 0.5V, VEE = 0V(2)
TA = -40C Symbol IEE VOH VOL VIH VIL VIHCMR IIH IIL
Note 1. Note 2. Note 3.
TA = +25C Min. 20 3930 3050 3855 3130 Typ. 30 4055 3255 -- -- Max. 38 4180 3830 4180 3455 Min. 20 3990 3050 3915 3190 36
TA = +85C Typ. 32 4115 3315 -- -- Max. 38 4240 3440 4240 3515 Unit mA mV mV mV mV mV A A
Parameter Power Supply Current Output HIGH Voltage(3) Voltage(3)
Min. 20 3865 3050 3790 3065
Typ. 28 3990 3190 -- --
Max.
4115 3315 4115 3390
Outuput LOW
Input HIGH Voltage (Single-Ended) Input LOW Voltage (Single-Ended) Input HIGH Voltage Common Mode Range (Diff.) Input HIGH Current Input LOW Current D /D
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
2.0 -- 0.5 -150
-- -- -- --
VCC 150 -- --
10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Input and output parameters vary 1:1 with VCC. All loading with 50 to VCC -2.0V.
NECL DC ELECTRICAL CHARACTERISTICS(1)
VCC = 0V, VEE = -5.5V to -3.0V
TA = -40C Symbol IEE VOH VOL VIH VIL VIHCMR IIH IIL
Note 1. Note 2.
TA = +25C Min. 20 -1070 -1950 -1145 -1870 Typ. 30 -945 -1745 -- -- Max. 38 -820 -1620 -820 -1545 Min. 20 -1010 -1950 -1085 -1810 36
TA = +85C Typ. 32 -885 -1685 -- -- Max. 38 -760 -1560 -760 -1485 Unit mA mV mV mV mV mV A A
Parameter Power Supply Current Output HIGH Voltage(2) Outuput LOW Voltage(2) Input HIGH Voltage (Single-Ended) Input LOW Voltage (Single-Ended) Input HIGH Voltage Common Mode Range (Diff.) Input HIGH Current Input LOW Current D /D
Min. 20 -1135 -1950 -1210 -1935
Typ. 28 -1010 -1810 -- --
Max.
-885 -1685 -885 -1610
VEE +2.0 -- 0.5 -150 -- -- --
VCC 150 -- --
VEE +2.0 -- 0.5 -150 -- -- --
VCC 150 -- --
VEE+2.0 -- 0.5 -150 -- -- --
VCC 150 -- --
10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. All loading with 50 to VCC -2.0V.
M9999-112805 hbwhelp@micrel.com or (408) 955-1690
4
Micrel, Inc.
ECL ProTM SY10EP08V
AC ELECTRICAL CHARACTERISTICS
VCC = 0V, VEE = -3.0V to -5.5V; VCC = 3.0V to 5.5V, VEE = 0V(1)
TA = -40C Symbol fMAX tPLH tPHL VPP tr tf
Note 1. Note 2.
TA = +25C Max. >3 240 1200 170 Min. -- 120 150 70 Typ. -- 200 800 -- Max. >3 260 1200 170 Min. -- 150 150 70
TA = +85C Typ. -- -- 800 -- Max. >3 300 1200 170 Unit GHz ps mV ps
Parameter Maximum Toggle Frequency(2)
Min. -- 100 150 70
Typ. -- -- 800 120
Propagation Delay to Output Differential D, /D Q, /Q Input Voltage Swing (Diff.) Output Rise/Fall Times (20% to 80%) Q, /Q
Measured using a 750mV source, 50% duty cycle clock source. All loading with 50 to VCC -2.0V. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only.
M9999-112805 hbwhelp@micrel.com or (408) 955-1690
5
Micrel, Inc.
ECL ProTM SY10EP08V
8-PIN MSOP (K8-1)
Rev. 01
M9999-112805 hbwhelp@micrel.com or (408) 955-1690
6
Micrel, Inc.
ECL ProTM SY10EP08V
8-PIN PLASTIC SOIC (Z8-1)
Rev. 03
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131
TEL
USA
+ 1 (408) 944-0800
FAX
+ 1 (408) 474-1000
WEB
http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-112805 hbwhelp@micrel.com or (408) 955-1690
7

▲Up To Search▲

Price & Availability of SY10EP08VKG

	To Download SY10EP08VKG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .