View 571-0112-100_690810.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2mm LED CBI(R) Circuit Board Indicator (DIN 41494 Compatible), Bi-Level
HOUSING TYPE 0 WITHOUT PINS 2.50 [.095] 1.52 .20 [.060 .008] 13.72 [.540] 1.37 [.054] HOUSING TYPE 1 WITH PINS 1.27 [.050] MAX 5.08 [.20..0] 5.08 [.200]
571-01xx
2.54 .05 [.100 .002] TYP (3)
8.60 [.339]
3.81 [.150] 2.54 [.100]
1.80 .20 [.071 .008] 0.38 [.015] 3.00 .25 [.118 .010]
3.81 [.150] 2.54 [.100] CATHODE 0.46 [.018] 4.83 [.190]
O 1.02 .05 [.040 .002] TYP (4) RECOMMENDED PC BOARD HOLE PATTERN
0.38 [.015] 0.41 [.016]
2.54 [.100] 2.54 [.100]
CATHODE TOP LED
2.54 [.100]
Except where noted Housing Type 1 dimensions are the same as Housing Type 0 Dimensions in mm [inches]
Features
* Designed to accommodate DIN 41494 * Multiple CBIs form horizontal LED arrays on 2.54mm * * * * (0.100") center-lines High Contrast, UL 94 V-0 rated, black housing Oxygen index: 32% Polymer content: PBT, 0.290 g Housing stand-offs facilitate PCB cleaning
PART NO. WITHOUT PINS 571-0111 571-0112 571-0122 571-0132 571-0133 * Top-Bottom LED PART NO. WITH PINS 571-0111-100 571-0112-100 571-0122-100 571-0132-100 571-0133-100 * Top-Bottom LED
COLOR* Red-Red Red-Green Green-Green Yellow-Green Yellow-Yellow COLOR* Red-Red Red-Green Green-Green Yellow-Green Yellow-Yellow
* Solderability per MIL-STD-202F, method 208F * LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
Tolerance note: As noted, otherwise:
* LED Protrusion: 0.04 mm [0.016] * CBI Housing: 0.02mm[0.008]
PART NUMBER ORDERING CODE
Series Top LED Color Array Code
Arrays available. See Part Number ordering code.
Custom Combinations
* Contact factory for information on custom color combinations.
EXAMPLE
Single unit with pins
571- 01xx -10x
LED Type Bottom LED Color 1) With pins Number of Bi-Levels in array
LED colors: 0) Blank, 1) Red, 2) Green, 3) Yellow
-10x Suffix required only when ordering single units with pins or arrays
571- 01xx -100 102
Two bi-levels in an array (4 LEDs)
Typical Operating Characteristics (TA = 25C)
GENERAL PURPOSE Part Number 571-01xx
* IF = 10mA
See LED data sheet for additional information See Page 3-17 and 3-18 for Reference Only LED Drive Circuit Examples See Page 3-20 for Pin Out
Color Red Green Yellow
** IF = 20mA
Peak Wavelength nm 635 565 585
IV* mcd 12.6 8.7 12.6
V F ** Volts 2 2.1 2.1
Viewing Angle 21/2 38 38 38
LED Data sheet 521-9630 521-9632 521-9631
Page # 3-13 3-13 3-13
3-10
Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com
2mm Discrete LED Diffused
521-9630, -9631, -9632
CATHODE I.D. 2.40 [.095] 2.90 [.114] 25.40 [1.00] MIN CATHODE 3.30 [.13] 1.80 [.071] .45 [.018] TYP .40 [.016] TYP 1.00 [.04] MIN 2.54 [.10] NOM
PART NO. 521-9630 521-9631 521-9632
COLOR Red Yellow Green
R 1.65 [.065]
1.52 [.060] 3.30 [.130]
1.50 [.059] MAX
Dimensions in mm [inches]
3
Red Yellow Green
ABSOLUTE MAXIMUM RATINGS (TA=25C) Power Dissipation (mW) Forward Current (mA) Derating (mA/C) From 25C Peak Current (mA)
Pulse width = 10s
-9630 100 30 .4 120 -55/+100 -55/+100
-9631 60 20 .25 80 -55/+100 -55/+100
-9632 100 30 .4 120 -55/+100 -55/+100
Operating Temperature (C) Storage Temperature (C) Soldering Temperature
260C, 5 seconds, 1.6 mm from case
Red
Yellow
Green
OPERATING CHARACTERISTICS (TA=25C) Luminous Intensity (mcd) IF=10mA Peak Wavelength (nm) Peak Viewing Angle (21/2) Forward Voltage (V) IF=20mA Reverse Voltage (V), IR=100A Min. Typical Typical Typical Typical Max. Min.
-9630 3.7 12.6 635 38 2 2.8 5
-9631 3.7 12.6 585 38 2.1 2.8 5
-9632 2.5 8.7 565 38 2.1 2.8 5
11/42is the off axis angle at which the luminous intensity is half the axial luminous intensity
Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com
3-13

▲Up To Search▲

Price & Availability of 571-0112-100

	To Download 571-0112-100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .