 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| v01.1202 MICROWAVE CORPORATION HMC336MS8G Features Broadband Performance: DC - 6.0 GHz High Isolation: 42 dB@ 6 GHz Low Insertion Loss: 1.6 dB@ 6 GHz MSOP8G SMT Package GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC* - 6.0 GHz Typical Applications This switch is suitable for usage in DC - 6.0 GHz 50-Ohm or 75-Ohm systems: * Broadband * Fiber Optics * Switched Filter Banks * Wireless below 6.0 GHz Functional Diagram General Description The HMC336MS8G is a broadband non-reflective GaAs MESFET SPDT switch in a low cost 8 lead MSOP8G surface mount package with an exposed ground paddle. Covering DC to 6.0 GHz, this switch offers high isolation and low insertion loss. The switch operates using a positive control voltage of 0/+5 Volts, and requires a fixed bias of +5V. This switch is suitable for usage in 50-Ohm or 75-Ohm systems. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, With 0/+5V Control, 50 Ohm System Parameter Frequency DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz "On State" "Off State" DC - 2.0 GHz DC - 6.0 GHz 2.0 - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz DC - 6.0 GHz 8 20 ns ns 42 39 37 9 6 13 20 37 Min. Typ. 1.2 1.4 1.6 47 44 42 12 9 18 25 42 Max. 1.6 1.8 2.0 Units dB dB dB dB dB dB dB dB dB dBm dBm Insertion Loss Isolation Return Loss Return Loss (RF1, RF2) Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone, 1 MHz Tone Spacing) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) * DC blocking capacitors are required at ports RFC, RF1 and RF2. Their value will determine the lowest transmission frequency. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 176 MICROWAVE CORPORATION v01.1202 HMC336MS8G GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz GaAs MMIC SUB-HARMONICALLY Isolation PUMPED Insertion Loss vs. Temperature 0 0 -10 -1 RF1 RF2 MIXER 17 - 25 GHz INSERTION LOSS (dB) -20 -2 ISOLATION (dB) +25 C -40 C +85 C -30 -40 -50 -60 -70 -3 -4 -5 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Return Loss 0 -5 0.1 and 1 dB Input Compression Point 30 INPUT COMPRESSION POINT (dBm) 29 28 27 0.1 dB Compression Point 1 dB Compression Point 14 SWITCHES - SMT 14 - 177 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) RFC RF1,2 ON RF1,2 OFF 26 25 24 23 22 21 20 1 2 3 4 5 6 7 FREQUENCY (GHz) Input Third Order Intercept Point INPUT THIRD ORDER INTERCEPT (dBm) 60 55 50 45 40 35 30 1 2 3 4 5 6 7 8 FREQUENCY (GHz) +25 C -40 C +85 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.1202 HMC336MS8G GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz Absolute Maximum Ratings Bias Voltage Range (Vdd) Control Voltage Range (A & B) Storage Temperature Operating Temperature Maximum Input Power +7.0 Vdc -0.5V to Vdd +1.0 Vdc -65 to +150 C High -40 to +85 C +28 dBm Low RF2 A Low Truth Table Control Input B High Signal Path State RFCOM to: RF1 Note: DC blocking capacitors are required at ports RFC and RF1, 2. Their value will determine the lowest transmission frequency. Bias Voltage & Current Control Voltages Idd (Max.) (A) 100 High +5 Vdc @ 10 A Typical State Low Bias Condition 0 to 0.2 Vdc @ 35 A Typical 14 SWITCHES - SMT Vdd (Vdc) +5.0 Idd (Typ.) (A) 35 14 - 178 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.1202 HMC336MS8G GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 14 SWITCHES - SMT 14 - 179 Pin Descriptions Pin Number Function Description Interface Schematic 1 CTLA See truth table and control voltage table. 2 CTLB See truth table and control voltage table. 3, 5, 8 RFC, RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. 4 VDD Supply Voltage. This pin may be left floating with degradation of power performance by approximately 1.5 dB. 6, 7 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.1202 MICROWAVE CORPORATION HMC336MS8G GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz Evaluation PCB 14 SWITCHES - SMT List of Material Item J1 - J3 J4 - J7 C1 - C3 C4 R1 - R2 U1 PCB* Description PC Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 10k pF Capacitor, 0603 Pkg. 100 Ohm Resistor, 0402 Pkg. HMC336MS8G SPDT Switch 104122 Evaluation PCB 1.05"x1.30" The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. * Circuit Board Material: Rogers 4350 14 - 180 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.1202 HMC336MS8G GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz Notes: 14 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 181 |
Price & Availability of HMC336MS8G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |