View 2124_964532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 93856A
RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-2)
Product Summary
Part Number Radiation Level RDS(on) ID IRHNA57163SE 100K Rads (Si) 0.0135 75A*
IRHNA57163SE 130V, N-CHANNEL
4#
TECHNOLOGY
c c
SMD-2
International Rectifier's R5TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
Features:
n n n n n n n n n n
Single Event Effect (SEE) Hardened Ultra Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Surface Mount Ceramic Package Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = 12V, TC = 25C ID@ VGS = 12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Pckg. Mounting Surface Temp. Weight * Current is limited by internal wire diameter For footnotes refer to the last page 75* 62 300 300 2.4 20 280 75 30 5.5 -55 to 150 300 (for 5s) 3.3 (Typical)
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
g
www.irf.com
1
08/08/01
IRHNA57163SE
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter Min Typ Max Units
-- -- V 0.17 -- V/C -- 0.0137 -- 0.0135 -- 0.0135 -- 4.0 V -- -- S( ) -- 10 A -- 25 -- -- -- -- -- -- -- -- -- 4.0 100 -100 160 55 75 35 125 80 50 --
Test Conditions
VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 12V, ID = 75A VGS = 12V, ID = 62A VGS = 12V, ID = 45A VDS = VGS, ID = 1.0mA VDS > 15V, IDS = 62A VDS = 104V ,VGS=0V VDS = 104V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS =12V, ID = 75A VDS = 65V VDD = 65V, ID = 75A, VGS =12V, RG = 2.35
BVDSS Drain-to-Source Breakdown Voltage 130 BV DSS/T J Temp.Coefficient of Breakdown Voltage -- RDS(on) Static Drain-to-Source On-State -- Resistance -- -- VGS(th) Gate Threshold Voltage 2.0 gfs Forward Transconductance 39 IDSS Zero Gate Voltage Drain Current -- -- IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- --
nA nC
ns
nH
Measured from the center of drain pad to center of source pad VGS = 0V, VDS = 25V f = 1.0MHz
Ciss C oss C rss
Input Capacitance Output Capacitance Reverse Transfer Capacitance
-- -- --
5020 1490 116
-- -- --
pF
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- 75* 300 1.2 300 4.1
Test Conditions
A
V ns C
Tj = 25C, IS = 75A, VGS = 0V Tj = 25C, IF = 75A, di/dt 100A/s VDD 25V
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by internal wire diameter
Thermal Resistance
Parameter
RthJC RthJ-PCB Junction-to-Case Junction-to-PC board
Min Typ Max Units
-- -- -- 1.6 0.42 --
C/W
Test Conditions
soldered to a 2" square copper-clad board
Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRHNA57163SE
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (SMD-2) Diode Forward Voltage
100K Rads (Si)
Units
V nA A V
Test Conditions
VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20V VDS= 104V, VGS= 0V VGS = 12V, ID = 45A VGS = 12V, ID = 45A VGS = 0V, ID = 75A
Min
130 2.0 -- -- -- -- -- --
Max
-- 4.5 100 -100 10 0.014 0.0135 1.2
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion Br I Au LET MeV/(mg/cm2)) 36.7 59.8 82.3 Energy (MeV) 309 341 350 VDS (V) Range (m) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V 39.5 130 130 130 130 130 32.5 130 130 130 100 50 28.4 130 120 30 -- --
150 120 VDS 90 60 30 0 0 -5 -10 VGS -15 -20 Br I Au
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHNA57163SE
Pre-Irradiation
1000
100
10
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
1000
100
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
5.0V
10
1
5.0V
20s PULSE WIDTH T = 25 C
J 1 10 100
0.1 0.1
1 0.1
20s PULSE WIDTH T = 150 C
J 1 10 100
VDS , Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
TJ = 150 C
R DS(on) , Drain-to-Source On Resistance (Normalized)
1000
3.0
ID = 75A
I D , Drain-to-Source Current (A)
2.5
100
2.0
10
TJ = 25 C
1.5
1.0
1
0.5
0.1 5 6 7 8
V DS =15 50V 20s PULSE WIDTH 9 10 11
0.0 -60 -40 -20
VGS = 12V
0 20 40 60 80 100 120 140 160
VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature C) (
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHNA57163SE
12000
10000
VGS , Gate-to-Source Voltage (V)
VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd
20
ID = 75A
16
VDS = 104V VDS = 65V VDS = 26V
C, Capacitance (pF)
8000
6000
Ciss C oss
12
8
4000
2000
C rss
4
0 1 10 100
0 0 50 100
FOR TEST CIRCUIT SEE FIGURE 13
150 200 250
VDS , Drain-to-Source Voltage (V)
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
1000
1000 OPERATION IN THIS AREA LIMITED BY R DS(ON)
ISD , Reverse Drain Current (A)
100
10
ID, Drain Current (A)
TJ = 150 C
100
100s 10 1ms Tc = 25C Tj = 150C Single Pulse 1 1 10 100 1000 VDS, Drain-to-Source Voltage (V)
TJ = 25 C
1
0.1 0.2
V GS = 0 V
0.6 1.0 1.4 1.8 2.2
10ms
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHNA57163SE
Pre-Irradiation
100
LIMITED BY PACKAGE
VGS
80
VDS
RD
D.U.T.
+
I D , Drain Current (A)
RG
-VDD
60
VGS
Pulse Width 1 s Duty Factor 0.1 %
40
Fig 10a. Switching Time Test Circuit
20
VDS 90%
0 25 50 75 100 125 150
TC , Case Temperature ( C)
10% VGS
Fig 9. Maximum Drain Current Vs. Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
1
Thermal Response (Z thJC )
D = 0.50 0.1 0.20 0.10 0.05 0.02 0.01
SINGLE PULSE (THERMAL RESPONSE)
0.01
0.001 0.00001
Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 0.0001 0.001 0.01
P DM t1 t2 1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHNA57163SE
500
EAS , Single Pulse Avalanche Energy (mJ)
1 5V
400
TOP BOTTOM ID 34A 60A 75A
VD S
L
D R IV E R
300
RG
D .U .T.
IA S
+ - VD D
A
200
VGS 20V
tp
0 .0 1
100
Fig 12a. Unclamped Inductive Test Circuit
0 25 50 75 100 125 150
Starting TJ , Junction Temperature ( C)
V (B R )D S S tp
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
IAS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
12 V
QGS VG QGD
VGS
3mA
D.U.T.
+ V - DS
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
7
IRHNA57163SE
Pre-Irradiation
Footnotes:
Repetitive Rating; Pulse width limited by
maximum junction temperature. VDD = 50V, starting TJ = 25C, L= 0.1 mH Peak IL = 75A, VGS = 12V ISD 75A, di/dt 280A/s, VDD 130V, TJ 150C
Pulse width 300 s; Duty Cycle 2% Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Total Dose Irradiation with VDS Bias. 104 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- SMD-2
PAD ASSIGNMENTS
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 08/01
8
www.irf.com

▲Up To Search▲

Price & Availability of 2124

	To Download 2124 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .