Part Number Hot Search : 
1G03UM 25NSF 5156BM SMPC15A 78MR06 29LV004 UC2842B 10036355
Product Description
Full Text Search
 

To Download 2535 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Bulletin PD-20585 rev. B 02/02
MBRS340TR
SCHOTTKY RECTIFIER 3 Amp
SMC
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM @ t p= 5 s sine VF TJ @3.0 Apk, TJ = 125C range
Description/Features Units
A V A V C The MBRS340TR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
Value
3.0 40 1580 0.43 - 55 to 150
Device Marking: IR34
2.75 (.108) 3.15 (.124)
5.59 (.220) 6.22 (.245)
CATHODE
ANODE
6.60 (.260) 7.11 (.280) .152 (.006) .305 (.012) 2.00 (.079) 2.62 (.103) .102 (.004) 0.76 (.030) 1.52 (.060) 7.75 (.305) 8.13 (.320) .203 (.008)
1 POLARITY 2 PART NUMBER 1 2
Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to Application Note # AN-994
www.irf.com
1
MBRS340TR
Bulletin PD-20585 rev. B 02/02
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
MBRS340TR
40
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
Value
3.0 4.0
Units Conditions
A 50% duty cycle @ TL = 118 C, rectangular wave form 50% duty cycle @ TL = 110 C, rectangular wave form A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 0.4A, L = 5mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Following any rated load condition and with rated VRRM applied
IFSM EAS IAR
Max. Peak One Cycle Non-Repetitive Surge Current Non Repetitive Avalanche Energy Repetitive Avalanche Current
1580 80 8 1.0
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (1)
Value
0.525 0.68 0.43 0.57
Units Conditions
V V V V mA mA mA pF nH V/s @ 3A @ 6A @ 3A @ 6A TJ = 25 C TJ = 100C TJ = 125 C VR = 5VDC(test signal range 100KHz to 1Mhz) 25C Measured lead to lead 5mm from package body (Rated VR) VR = rated VR TJ = 25 C TJ = 125 C
IRM
Max. Reverse Leakage Current
(1)
2.0 20 35
CT LS
Max. Junction Capacitance Typical Series Inductance
230 3.0 10000
dv/dt Max. Voltage Rate of Change
(1) Pulse Width < 300s, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Storage Temperature Range (**) 46 C/W DC operation
Value
- 55 to 150 12
Units
C C C/W DC operation
Conditions
Max. Junction Temperature Range (*) - 55 to 150
RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Case Style Device Marking
(*) dPtot 1
0.24(0.008) g (oz.) SMC IR34 Similar to DO-214AB
< thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB
2
www.irf.com
MBRS340TR
Bulletin PD-20585 rev. B 02/02
10
100000
T J = 150C 125C 100C
Reverse Current - I R (mA)
10000
1000
75C
100
50C
Instantaneous Forward Current - I F (A)
10
25C
T = 150C
J J J
1 0 10 20 30 Reverse Voltage - VR (V) 40
1
T = 125C T = 25C
1000
Junction Capacitance - C T (p F)
Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg)
T = 25C J
100
0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Forward Voltage Drop - VFM (V)
10 0 5 10 15 20 25 30 35 40 45 Reverse Voltage - VR (V)
Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg)
100
Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg)
(C/W)
10
Thermal Impedance Z
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
thJC
PDM
t1
1
Single Pulse (Thermal Resistance)
Notes:
t2
1. Duty factor D = t1/ t 2 2. Peak Tj = Pdm x ZthJC+Tc
0.1 0.00001
0.0001
0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (Seconds)
10
100
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics (Per Leg)
www.irf.com
3
MBRS340TR
Bulletin PD-20585 rev. B 02/02
160
Allowable Lead Temperature (C)
150 140 130 120 110 100 90 80
DC
Average Power Loss (Watts)
D=0.20 D=0.25 D=0.33 D=0.50 D=0.75
2
1.5
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
DC
RMS Limit
1
Square wave (D = 0.50) Rated Vr applied
0.5
70 see note (2) 60 0 1 2 3 4 5
Average Forward Current - I F(AV) (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature
0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Average Forward Current - I F(AV) (A)
Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current
Non-Repetitive Surge Current - I FSM (A)
1000
100
At Any Rated Load Condition And With rated Vrrm Applied Following Surge
10 10
100
1000
10000
Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
MBRS340TR
Bulletin PD-20585 rev. B 02/02
Tape & Reel Information
330 (13)
16 (0.63)
8 (0.32) 16 (0.63)
FEED DIRECTION
Dimensions in millimeters and (inches)
Marking & Identification
Each device has marking and identification on two rows. - The first row designates the device as manufactured by International Rectifier as indicated by the letters "IR", then Current and Voltage. - The second row shows the data code: Year and Week. See below marking diagram.
Ordering Information
MBRS340TR - TAPE AND REEL WHEN ORDERING, INDICATE THE PART NUMBER AND THE QUANTITY ( IN MULTIPLES OF 3000 PIECES). EXAMPLE: MBRS340TR - 6000 PIECES
FIRST ROW IR 3 4 SECOND ROW Date Code YY WW
www.irf.com
5
MBRS340TR
Bulletin PD-20585 rev. B 02/02
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/02
6
www.irf.com


▲Up To Search▲   

 
Price & Availability of 2535

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X