View 6265_969421.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ST623X-KIT
STARTER KIT FOR ST6230 and ST6232 MCUs
HARDWARE FEATURES
s
SOFTWARE FEATURES
s s s
Immediate evaluation of ST6230 and ST6232 devices, with stand-alone demonstration routines. Simulation and debugging within the user's real application environment.
Software simulation, including I/O read/write. Assembler, Linker and Simulator. In-socket OTP and EPROM programming utilities. In-circuit OTP and EPROM programming utilities Application examples and demonstrations
s
s s
In-socket programming of all OTP and EPROM ST6230 (DIP28) and ST6232 (SDIP42) devices. In-circuit programming of all OTP and EPROM ST6230 and ST6232 devices directly on the user's application board (all packages).
s
s
August 1998
This is advance information from STMicroelectronics. Details are subject to change without notice.
1/4
729
ST623X-KIT
The Starter Kit Board
The Starter Kit board includes the following resources: * * * * * * * * Reset and data control buttons. LED indicators. Resistance trimmer. Temperature control circuit. RS-232 interface. Demonstration program selector jumpers. Three 7-segment displays. A voltage control oscillator. * * * * Voltage: 16V min./20V max., Current: 100 mA min.
It includes the following connectors: * A parallel port connector (P1) for connection to the host PC when it is used as a hardware simulator or for programming. A remote resource I/O interface connector (J2) to which you can connect your own hardware resource. An RS-232 connector, which you can use for observing RS-232 communication control using an ST6. A connector for your own in-circuit ST6 programming board.
It comes with its own power supply unit that can be plugged into an AC mains source, or a DC source with the following characteristics:
2/4
730
ST623X-KIT
The following diagram shows the layout of the Starter Kit board.
1 2 3 4 5 6 7 8 9 10
In-circuit programming connector (J1). Demonstration routine selector. 8 Mhz oscillator. PC connector P1. LEDs. Voltage control oscillator. Power supply JACK connector J3. Heater resistor LED indicator LD4. Power supply LED indicator LD5. Heater resistor.
11 12 13 14 15 16 17 18 19 20
Thermistor. RESET button. "+" and "-" buttons. RS232 interface circuit and connector. 7-segment displays. DIP 28 ZIF MCU socket. Remote resource I/O interface connector J2. SDIP 42 ZIF MCU socket. 10 K trimmer. "Programming" or "User" operating mode selection jumpers W2.
1 2 3 4 5 W4 6 7 8 9
10
W2
W3
20 19
W1
ST6230 ST6232
18 17 16
W5
15 14 13
W6
W11 W12
12 11
3/4
729
ST623X-KIT
Figure 2. Block Diagram of the Starter Kit board *
POWER SUPPLY UNIT DAC VCO DISPLAY SPI J3 JP1 UART TEMPERATURE CONTROL TRIMMER RS232 P2
ST62E32
PARALLEL CONNECTION TO PC AND SOFTWARE SIMULATOR P1 ST623x I/O CONNECTION J2 USER APPLICATION
EPROM PROGRAMMER
IN-CIRCUIT PROGRAMMING J1
ORDERING INFORMATION
Sales Type ST623X-KIT/UK ST623X-KIT/110 ST623X-KIT/220 Description Starter Kit for ST6230 and ST6232 MCUs for operation in United Kingdom Starter Kit for ST6230 and ST6232 MCUs for operation from 110 Vac mains Starter Kit for ST6230 and ST6232 MCUs for operation from 220 Vac mains
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without the express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c)1998 STMicroelectronics - All Rights Reserved. Purchase of I2C Components by STMicroelectronics conveys a license under the Philips I2C Patent. Rights to use these components in an I2C system is granted provided that the system conforms to the I2C Standard Specification as defined by Philips. STMicroelectronics Group of Companies Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com
4/4
730

▲Up To Search▲

Price & Availability of 6265

	To Download 6265 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .