View 7967_971726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74V1T384
SINGLE HIGH SPEED BUS SWITCH
s s
s
s
s s
HIGH SPEED: tPD = 0.5ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 1A(MAX.) at TA=25C LOW "ON" RESISTANCE at VCC=5.0V: RON= 7 (TYP), VIN=0V, II/O =30mA RON= 14 (TYP), VIN=2.4V, II/O =15mA OPERATING VOLATGE RANGE: VCC (OPR.) = 4.0V TO 5.5V 5V TOLERANT ON CONTROL PIN COMPATIBLE WITH TTL OUTPUTS: VIH = 2V (MIN), VIL = 0.8V (MAX)
SOT23-5L
SOT323-5L
ORDER CODES
PACKAGE SOT23-5L SOT323-5L T&R 74V1T384STR 74V1T384CTR
DESCRIPTION The 74V1T384 is an advanced high-speed CMOS SINGLE HIGH SPEED BUS SWITCH fabricated in silicon gate C2MOS technology. It's designed to operate from 4V to 5.5V, making this device ideal for portable applications. It's offers 7 Resistance typical value at VCC=5V. Additional key feature are fast switching speed (tON=3.8ns, tOFF=3.3ns Typical) and Low Power Consumption. The OE input is provided to control the switch; the switch is ON when the OE input is held low and OFF when OE is held high.
It's available in the commercial and extended temperature range in SOT23-5L and SC-70-5L package.
PIN CONNECTION AND IEC LOGIC SYMBOLS
April 2002
1/9
74V1T384
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1 2 4 3 5 SYMBOL I/O O/I OE GND VCC NAME AND FUNCTION Independent Input/Output Independent Output/Input Enable Input (Active HIGH) Ground (0V) Positive Supply Voltage
TRUTH TABLE
OE L H
* High Impedance State
SWITCH FUNCTION ON OFF *
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VIC VO IIK IIK IOK IO Supply Voltage DC Input Voltage DC Control Input Voltage DC Output Voltage DC Input Diode Current DC Control Input Diode Current DC Output Diode Current DC Output Current Parameter Value -0.5 to +7.0 -0.5 to VCC + 0.5 -0.5 to +7.0 -0.5 to VCC + 0.5 20 - 20 20 50 50 -65 to +150 300 Unit V V V V mA mA mA mA mA C C
ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec)
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VIC VO Top dt/dv Supply Voltage Input Voltage Control Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time (note 1) VCC = 5.0V Parameter Value 4.0 to 5.5 0 to VCC 0 to 5.5 0 to VCC -55 to 125 0 to 20 Unit V V V V C ns/V
1) VIN from 0.8V to 2V on control pin
2/9
74V1T384
DC SPECIFICATIONS
Test Condition Symbol Parameter VCC (V) 5.0(*) 5.0(*) 4.0 4.0 VIC = VIL VI/O = GND II/O 30 mA VIC = VIL VI/O = 2.4V II/O 10 mA VOS = VCC to GND VIS = VCC to GND VIC = VIH VIC = 5.5V or GND VI = VCC or GND C Input at 3.4V 7 2 0.8 TA = 25C Min. 2 0.8 2 0.8 10 Typ. Max. Value -40 to 85C Min. 2 0.8 2 0.8 15 Max. -55 to 125C Min. 2 0.8 Max. V V V V Unit
VIH VIL VIH VIL RON
High Level Input Voltage Low Level Input Voltage High Level Input Voltage Low Level Input Voltage ON Resistance
4.5 RON ON Resistance 4.5 IOFF Input/Output Leakage Current (SWITCH OFF) Control Input Leakage Current Quiescent Supply Current Additional Worst Case Supply Current
20
40
60
5.5 0 to 5.5 5.5 5.5
0.1
0.1 1 1.35
1
1.0 10 1.5
10
1.0 20 1.5
A
A A mA
IIN
ICC
ICC
(*) Voltage range is 5V 0.5V
AC ELECTRICAL CHARACTERISTICS (CL = 50pF, Input tr = tf = 3ns)
Test Condition Symbol Parameter VCC (V) 5.0(*) 5.0(*) tr = tf = 6ns CL = 50pF R1 = 500 VIN=2.4V CL = 50pF R1 = 1K VIN=2.4V TA = 25C Min. Typ. 0.5 3.8 Max. 0.8 6.5 Value -40 to 85C Min. Max. 1.0 9.0 -55 to 125C Min. Max. 2.0 10.0 ns ns Unit
tPD tPLZ tPHZ
Delay Time Output Disable Time
tPZL tPZH
Output Enable Time
5.0
(*)
3.3
5.0
7.5
8.5
ns
(*) Voltage range is 5.0V 0.5V
3/9
74V1T384
CAPACITIVE CHARACTERISTICS
Test Condition Symbol Parameter Min. CIN CI/O CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1) TA = 25C Typ. 4 7 3 Max. 10 Value -40 to 85C Min. Max. 10 -55 to 125C Min. Max. 10 pF pF pF Unit
1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
4/9
74V1T384
SOT23-5L MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0.95 1.9 0.55 13.7 TYP MAX. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 MIN. 35.4 0.0 35.4 13.7 3.5 110.2 102.3 59.0 37.4 74.8 21.6 TYP. MAX. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 mils
5/9
74V1T384
SOT323-5L MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.15 0.10 1.80 1.80 1.15 0.65 1.3 0.30 3.9 TYP MAX. 1.10 0.10 1.00 0.30 0.18 2.20 2.40 1.35 MIN. 31.5 0.0 31.5 5.9 3.9 70.9 70.9 45.3 25.6 51.2 11.8 TYP. MAX. 43.3 3.9 39.4 11.8 7.1 86.6 94.5 53.1 mils
6/9
74V1T384
Tape & Reel SOT23-xL MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.13 3.07 1.27 3.9 3.9 3.23 3.17 1.37 4.0 4.0 12.8 20.2 60 14.4 3.33 3.27 1.47 4.1 4.1 0.123 0.120 0.050 0.153 0.153 0.127 0.124 0.054 0.157 0.157 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.131 0.128 0.0.58 0.161 0.161 0.512 MIN. TYP. MAX. 7.086 0.519 inch
7/9
74V1T384
Tape & Reel SOT323-xL MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.98 3.98 2.25 2.7 1.2 4 4 4.2 4.2 0.156 0.156 175 12.8 20.2 59.5 60 60.5 14.4 0.088 0.106 0.047 0.157 0.157 0.165 0.165 TYP 180 13 MAX. 185 13.2 MIN. 6.889 0.504 0.795 2.362 0.567 TYP. 7.086 0.512 MAX. 7.283 0.519 inch
8/9
74V1T384
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com
9/9

▲Up To Search▲

Price & Availability of 7967

	To Download 7967 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .