View E423117_982371.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU MEDIA DEVICE DATA SHEET
DS04-23117-6E
ASSP Mobile Communication Systems
Piezoelectric SAW BPF (700 MHz to 1700 MHz)
F5/F6 Series (K2 type)
s DESCRIPTION
The F5/F6-K2 series of SAW band pass filters is available in the 700 MHz-1700 MHz frequency range and exhibit high stability by using single crystal Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. The F5/F6-K2 series provides low insertion loss and wide pass-band width by taking advantage of FUJITSU MEDIA DEVICE'S unique "Ladder-type" design. Typical applications for the F5/F6-K2 series include RF interstage filter in mobile communications systems. Standard devices are available for AMPS/TDMA/CDMA,GSM, EGSM,PDC800,J-CDMA,PDC1.5G and so on. If higher attenuation is preferred, our F5-D2 series is also recommended.
s FEATURES
* * * * * Low insertion loss and good skirt performance Compact and light package (3.0 mm sq.) External matching circuits are not required. (50 I/O) Surface mount package (SMT) Standard devices are available for mobile communication standards.
s PACKAGE
F5/F6 Series (K2 type)
s PIN ASSIGNMENT
(BOTTOM VIEW)
1 2 3
6
5
4
s PIN DESCRIPTION
Pin No. 1 2 3 4 5 6 Pin name GND IN GND GND OUT GND Ground Pin Input Pin Ground Pin Ground Pin Output Pin Ground Pin Description
2
F5/F6 Series (K2 type)
s ABSOLUTE MAXIMUM RATINGS
Parameter Operating temperature Storage temperature Input level Input DC voltage Symbol Ta Tstg PIN Rating Min -30 -40 -5 Max +85 +100 +23 +5 Unit C C dBm V
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter Operating temperature Symbol Ta Value Min -30 Max +85 Unit C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within this range. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
s STANDARD DEVICES
System Center frequency (MHz) 836.5 836.5 897.5 897.5 942.5 820.0 906.0 J-CDMA Tx Rx Tx PDC1.5 G Rx Lo 906.0 906.0 851.0 1441.0 1489.0 1619.0 Band width (MHz) 25 25 35 35 35 20 38 38 38 38 24 24 24 Part symbol 25 30 26 31 88 04 19 15 38 12 20 21 22 Part number FAR-F5CE-836M50-K225 FAR-F5CE-836M50-K230 FAR-F5CE-897M50-K226 FAR-F5CE-897M50-K231 FAR-F5CE-942M50-K288 FAR-F5CE-820M00-K204 FAR-F5CE-906M00-K219 FAR-F5CE-906M00-K215 FAR-F5CE-906M00-K238 FAR-F5CE-851M00-K212 FAR-F6CE1G4410-K220 FAR-F6CE1G4890-K221 FAR-F6CE1G6190-K222 3 High Att. type Low loss type Low loss type High Att. type Remarks Low loss type High Att. type
AMPS/TDMA/CDMA Tx Tx Rx PDC800 (20 MHz pass-band Rx width standard)
EGSM
F5/F6 Series (K2 type)
s ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. AMPS/TDMA/CDMA (Tx) Low Loss type Part number : FAR-F5CE-836M50-K225
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Pass-band VSWR (Return loss) Conditions 824 MHz to 849 MHz 824 MHz to 849 MHz DC to 800 MHz 869 MHz to 894 MHz 894 MHz to 2000 MHz 824 MHz to 849 MHz Value Min 20 28 22 (6.2) Typ 2.0 0.9 23 30 25 2.6 (7.0) Max 2.5 1.5 2.9 ()
1: 42.77
(Ta = -30 C to +85 C) Unit dB dB dB dB dB (dB)
-21.717
Remarks
S21
log MAG
1 2
5 dB/
REF 0 dB 1 : -1.6128 dB 824 MHz 2 : -1.7319 dB 849 MHz 3 : -55.599 dB 869 MHz 4 : -30.788 dB 894 MHz
S11
1U FS
8.894 pF
824.000 000 MHz
2 : 66.051 -12.398 849 MHz 3 : 324.53 -386.41 869 MHz 1 2 3 4 : 7.668 -115.35 894 MHz
4
4
CENTER 835 MHz S11 SWR 1/
3 REF1 3 4
SPAN 300 MHz
CENTER 835 MHz S22 1U FS 1: 57.635 4.4492
SPAN 300 MHz 859.36 pH
1 2 S22 SWR 1/ REF1 3 4
1 : 1.6347 824 MHz 2 : 1.4211 849 MHz 3 : 15.917 869 MHz 4 : 41.316 894 MHz 1 1 : 1.1909 824 MHz 2 : 1.3716 849 MHz 3 : 30.012 869 MHz 4 : 25.196 894 MHz SPAN 300 MHz CENTER 835 MHz
2
824.000 000 MHz
2 : 68.309 -2.4727 849 MHz 3 : 25.938 -188.81 869 MHz 4 : 6.6602 -76.531 894 MHz 3
1 CENTER 835 MHz 2
4 SPAN 300 MHz
4
F5/F6 Series (K2 type)
2. AMPS/TDMA/CDMA (Tx) High Attenuation type Part number : FAR-F5CE-836M50-K230
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Pass-band VSWR (Return loss) Conditions 824 MHz to 849 MHz 824 MHz to 849 MHz DC to 800 MHz 869 MHz to 894 MHz 894 MHz to 1200 MHz 1200 MHz to 2000 MHz 824 MHz to 849 MHz Value Min 28 30 35 20 (8.5) Typ 2.7 1.0 30 43 37 25 1.7 (11.7) Max 3.5 2.0 2.2 ()
1: 4.375
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB (dB)
-19.558
Remarks
S21
log MAG
5 dB/
REF 0 dB 1 : -41.423 dB 800 MHz 2 : -3.121 dB 824 MHz 3 : -2.4073 dB 849 MHz 4 : -51.709 dB 869 MHz
S11
1U FS
10.172 pF
800.000 000 MHz
2
3
2 : 28.668 -8.0127 824 MHz 3 : 52.691 -5.3926 849 MHz 3 2 4 4 : 234.96 -98.656 869 MHz
1
1
CENTER 850 MHz S11 SWR 1 1/
4 REF1
SPAN 300 MHz
CENTER 850 MHz S22 1U FS 1: 2.8123 -6.7119
SPAN 300 MHz 29.64 pF
4
1 : 13.196 800 MHz 2 : 1.8107 824 MHz 3 : 1.1266 849 MHz 4 : 5.5493 869 MHz
800.000 000 MHz
2 : 29.701 -8.9658 824 MHz 3 : 51.344 -8.582 849 MHz 1 2 3 4 : 11.895 -68.445 869 MHz
S22
SWR
1
2
3
1/ 4
REF1 1 : 18.129 800 MHz 2 : 1.7663 824 MHz 3 : 1.1915 849 MHz 4 : 12.269 869 MHz
4 CENTER 850 MHz SPAN 300 MHz
CENTER 850 MHz
2
3
SPAN 300 MHz
5
F5/F6 Series (K2 type)
3. EGSM (Tx) Part number : FAR-F5CE-897M50-K226
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Pass-band VSWR (Return loss) Conditions 880 MHz to 915 MHz 880 MHz to 915 MHz DC to 845 MHz 925 MHz to 935 MHz 935 MHz to 2000 MHz 880 MHz to 915 MHz Value Min 20 4.5 7 25 (6.8) Typ 2.5 1.0 23 8 30 2.2 (8.5) Max 3.5 2.0 2.7 () Unit dB dB dB dB dB dB (dB)
-640.14 m
(Ta = -30 C to +85 C) Remarks
Ta = -30 C to +25 C Ta = +25 C to +85 C
S21
log MAG
5 dB/
REF 0 dB 3 1 : -40.016 dB 860 MHz 2 : -2.5519 dB 880 MHz 3 : -2.6839 dB 915 MHz 4 : -13.078 dB 925 MHz
S11
1U FS
1: 2.4664
289.1 pF
860.000 000 MHz
2
4
2 : 33.768 -7.4609 880 MHz 3 : 63.193 -18.152 915 MHz 2 3 4 4 : 79.777 -88.844 925 MHz
1
1
CENTER 900 MHz S11 SWR 1 1/ REF1
SPAN 300 MHz
CENTER 900 MHz S22 1U FS 1: 4.1191 055.42 m
SPAN 300 MHz 10.256 pH
4 2 1/ 3 REF1
1 : 20.297 860 MHz 2 : 1.5409 880 MHz 3 : 1.4868 915 MHz 4 : 3.9788 925 MHz 1 1 : 12.145 860 MHz 2 : 1.5335 880 MHz 3 : 1.5362 915 MHz 4 : 4.0924 925 MHz SPAN 300 MHz CENTER 900 MHz 2 3 4
860.000 000 MHz
2 : 32.902 -3.5879 880 MHz 3 : 64.594 -19.789 915 MHz 4 : 71.008 -87.965 925 MHz
S22
SWR
1
4 2 3
CENTER 900 MHz
SPAN 300 MHz
6
F5/F6 Series (K2 type)
4. EGSM (Tx) Low Loss type Part number : FAR-F5CE-897M50-K231
Parameter Insertion loss Pass-band ripple Conditions 880 MHz to 915 MHz 880 MHz to 915 MHz DC to 800 MHz 800 MHz to 860 MHz Absolute stop-band attenuation 925 MHz to 935 MHz 935 MHz to 960 MHz 960 MHz to 1850 MHz 1850 MHz to 3000 MHz Pass-band VSWR (Return loss)
S21 log MAG 3 4
(Ta = -30 C to +85 C) Value Min 17 15 4 20 20 7 (8.5)
S11
Typ 2.3 1.0 19 25 25 25 12 2.0 (9.5)
1U FS
Max 3.0 1.5 2.2 ()
Unit dB dB dB dB dB dB dB dB (dB)
Remarks
880 MHz to 915 MHz
5 dB/
REF 0 dB 1 : -34.864 dB 860 MHz 2 : -2.5866 dB 880 MHz 3 : -1.8632 dB 915 MHz 4 : -6.1014 dB 925 MHz 5 : -35.758 dB 935 MHz
1: 2.8936
-355.1 m
521.16 pF
860.000 000 MHz
2
2 : 27.864 6.6725 824 MHz 1 3 4 3 : 53.119 6.8086 816 MHz 2 4 : 68.02 28.528 925 MHz 5 : 15.414 67.184 936 MHz
1 5
5
CENTER 900 MHz S11 SWR 1 1/ REF1
SPAN 300 MHz 1 : 17.293 860 MHz 2 : 1.9296 880 MHz 3 : 1.1662 915 MHz 4 : 1.7696 925 MHz 5 : 5.3167 935 MHz
CENTER 900 MHz S22 1U FS 1: 2.6062
SPAN 300 MHz -2.6616 72.249 pF
860.000 000 MHz
5
2 : 24.988 1.2344 880 MHz 3 : 52.924 7.0195 816 MHz
2
S22
SWR
1
2
3 1/
4 REF1 5
1 1 : 19.249 860 MHz 2 : 2.0029 880 MHz 3 : 1.1691 915 MHz 4 : 1.8988 925 MHz 5 : 9.8112 935 MHz SPAN 300 MHz 3 4
4 : 68.707 32.946 925 MHz 5 : 14.52 68.902 936 MHz SPAN 300 MHz
5
2 CENTER 900 MHz
3
4
CENTER 900 MHz
7
F5/F6 Series (K2 type)
5. EGSM (Rx) Low Loss type Part number : FAR-F5CE-942M50-K288
Parameter Conditions Value Min 17 13 Absolute stop-band attenuation 905 MHz to 915 MHz 980 MHz to 1000 MHz 1000 MHz to 2000 MHz Pass-band VSWR (Return loss) 925 MHz to 960 MHz 8 5 13 20 (6.8) 20 22 2.2 (8.5) 2.7 () 16 Typ 2.0 0.5 18 Max 2.5 Insertion loss Pass-band ripple 925 MHz to 960 MHz 925 MHz to 960 MHz DC to 905 MHz 2.7 3.0 1.5 Unit dB dB dB dB dB dB dB dB dB dB (dB) Ta = +25 C 2 C Ta = -10 C to +60 C Ta = -30 C to +85 C
(Ta = -30 C to +85 C) Remarks Ta = +25 C 2 C Ta = -10 C to +60 C Ta = -30 C to +85 C
(Continued)
8
F5/F6 Series (K2 type)
(Continued)
Part number : FAR-F5CE-942M50-K288
S21 log MAG 5 dB/ 2 REF 0 dB 3 1 : -12.943 dB 915 MHz 2 : -2.0159 dB 925 MHz 3 : -1.5033 dB 960 MHz 4 : -22.349 dB 980 MHz 4 2 3 S11 1U FS 1: 19.434 28.751 5.0009 nH 915.000 000 MHz
1
1
2 : 29.646 -79.102 m 925 MHz 3 : 48.006 -4.0664 960 MHz 4 : 42.625 -97.496 980 MHz 4
CENTER 950 MHz S11 SWR 1/ REF1
SPAN 300 MHz
CENTER 950 MHz S22 1U FS 1: 41.318 11.084
SPAN 300 MHz 1.9279 nH
1
4
1 : 3.6211 915 MHz 2 : 1.6872 925 MHz 3 : 1.1022 960 MHz 4 : 6.3271 980 MHz
915.000 000 MHz
2 : 28.769 -198.24 m 925 MHz 1 3 : 47.871 -7.6563 960 MHz 3 4 : 31.156 -88.191 980 MHz
2 S22 SWR 1/
3
REF1 1 : 1.4234 915 MHz 2 : 1.7385 925 MHz 3 : 1.1792 960 MHz 4 : 6.8501 980 MHz SPAN 300 MHz CENTER 950 MHz 2
4
4
1 CENTER 950 MHz 2 3
SPAN 300 MHz
9
F5/F6 Series (K2 type)
6. PDC800 (Rx) High Attenuation type Part number : FAR-F5CE-820M00-K204
Parameter Insertion loss Pass-band ripple Conditions 810 MHz to 830 MHz 810 MHz to 830 MHz DC to 130 MHz Absolute stop-band attenuation 130 MHz to 760 MHz 855 MHz to 875 MHz 875 MHz to 1090 MHz 1090 MHz to 2000 MHz Pass-band VSWR (Return loss)
S21 log MAG
(Ta = -30 C to +85 C) Value Min 35 30 35 33 30 (7.4)
S11 1U FS
Typ 3.0 1.5 41 34 38 38 38 2.0 (9.5)
Max 3.5 2.0 2.5 ()
1: 43.031
Unit dB dB dB dB dB dB dB (dB)
-5.8691
Remarks
810 MHz to 830 MHz
5 dB/ 1 2
REF 0 dB 1 : -2.5198 dB 810 MHz 2 : -2.7362 dB 830 MHz 3 : -38.419 dB 940 MHz 4 : -38.349 dB 960 MHz
33.478 pF 810.000 000 MHz
2 : 68.773 -24.227 830 MHz 3: 1 6.707 -61.85 940 MHz
2
4 : 6.4629 -58.676 960 MHz
3
4 43
CENTER 820 MHz
SPAN 300 MHz
CENTER 820 MHz 1: 47.096 -6.457
SPAN 300 MHz
S11
SWR
1/
REF1 34 1 : 1.2172 810 MHz 2 : 1.6789 830 MHz 3 : 18.934 940 MHz 4 : 18.46 960 MHz
S22
1U FS
30.43 pF 810.000 000 MHz
2 : 72.691 -28.836 830 MHz 3 : 4.2344 -32.693 940 MHz 2 4 : 4.0957 -31.028 960 MHz
1 S22 SWR 2 1/ REF1
1 3 4 1 : 1.1592 810 MHz 2 : 1.8231 830 MHz 3 : 16.88 940 MHz 4 : 16.925 960 MHz SPAN 300 MHz CENTER 820 MHz
1 2 CENTER 820 MHz
43 SPAN 300 MHz
10
F5/F6 Series (K2 type)
7. J-CDMA (Tx) Part number : FAR-F5CE-906M00-K219
Parameter Insertion loss Pass-band ripple Conditions 887 MHz to 925 MHz 887 MHz to 925 MHz DC to 720 MHz 720 MHz to 800 MHz Absolute stop-band attenuation 832 MHz to 870 MHz 940 MHz to 942 MHz 942 MHz to 950 MHz 950 MHz to 2000 MHz 2000 MHz to 3000 MHz Pass-band VSWR (Return loss) 887 MHz to 925 MHz Value Min 20 20 32 15 20 20 15 (6.8) Typ 2.7 1.0 22 23 33 25 30 23 17 2.2 (8.5) Max 3.7 2.2 2.7 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB dB dB (dB) Remarks
(Continued)
11
F5/F6 Series (K2 type)
(Continued)
Part number : FAR-F5CE-906M00-K219
S21 log MAG 5 dB/ 2 3 REF 0 dB 1 : -39.716 dB 870 MHz 2 : -2.6918 dB 887 MHz 3 : -2.1755 dB 925 MHz 4 : -22.053 dB 940 MHz 4 2 1 4 3 S11 1U FS 1: 3.416 3.3799 618.3 pH
870.000 000 MHz
1
2 : 43.385 -10.713 887 MHz 3 : 56.156 -9.832 925 MHz 4 : 31.719 -82.156 940 MHz
CENTER 900 MHz S11 SWR 1 1/ REF 1
SPAN 300 MHz
CENTER 900 MHz S22 1U FS 1: 3.2349 -409.91 m
SPAN 300 MHz 446.28 pF
4
1 : 14.702 870 MHz 2 : 1.3179 887 MHz 3 : 1.245 925 MHz 4 : 6.3226 940 MHz 1
870.000 000 MHz 2 : 31.036 0.1445 887 MHz 3 : 56.93 -9.8203 925 MHz 2 3 4 : 28.336 -83.324 940 MHz
S22
SWR
1
2 1/
3 REF 1 1 : 15.453 870 MHz 2 : 1.6113 887 MHz 3 : 1.2532 925 MHz 4 : 7.11 940 MHz SPAN 300 MHz
4
4
2 CENTER 900 MHz
3
CENTER 900 MHz
SPAN 300 MHz
12
F5/F6 Series (K2 type)
8. J-CDMA (Tx) High Attenuation type Part number : FAR-F5CE-906M00-K215
Parameter Insertion loss Pass-band ripple Conditions 887 MHz to 925 MHz 887 MHz to 925 MHz DC to 720 MHz 720 MHz to 800 MHz Absolute stop-band attenuation 832 MHz to 870 MHz 940 MHz to 942 MHz 942 MHz to 950 MHz 950 MHz to 2000 MHz 2000 MHz to 3000 MHz Pass-band VSWR (Return loss) 887 MHz to 925 MHz Value Min 25 25 30 20 25 20 15 (5.1) Typ 3.0 1.5 26 30 35 25 30 25 20 3.0 (6.0) Max 4.5 3.0 3.5 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB dB dB (dB) Remarks
(Continued)
13
F5/F6 Series (K2 type)
(Continued)
Part number : FAR-F5CE-906M00-K215
S21 log MAG 5 dB/ REF 0 dB 1 : -46.292 dB 832 MHz 2 : -40.706 dB 870 MHz 3 : -2.5794 dB 887 MHz 4 : -3.6692 dB 925 MHz 5 : -37.56 dB 940 MHz S11 1U FS 1: 2.689 -12.27 16.69 pF
832.000 000 MHz
3
4
2 : 3.8438 9.0098 870 MHz 2 3 : 40.461 4.2715 887 MHz 3 1 4 4 : 54.449 22.648 925 MHz 5 : 11.408 56.516 940 MHz
5 1 2 5 SPAN 300 MHz 1/ 2 5 REF1 1 : 19.717 832 MHz 2 : 13.434 870 MHz 3 : 1.2611 887 MHz 4 : 1.5567 925 MHz 5 : 10.117 940 MHz 1 : 28.286 832 MHz 2 : 14.72 870 MHz 3 : 1.3669 887 MHz 4 : 1.5923 925 MHz 5 : 11.252 940 MHz SPAN 300 MHz CENTER 900 MHz S22 1U FS 1: 2.0361
CENTER 900 MHz S11 SWR 1
SPAN 300 MHz -13.292 14.391 pF
832.000 000 MHz
2 : 3.5034 8.8626 870 MHz
2
S22
SWR
1 2
3
4 1/ REF1 5
3 : 36.801 2.4824 887 MHz 3 4 4 : 56.646 24.078 925 MHz 5 : 10.123 55.98 940 MHz SPAN 300 MHz
1
5 CENTER 900 MHz
CENTER 900 MHz
3
4
14
F5/F6 Series (K2 type)
9. J-CDMA (Tx) Part number : FAR-F5CE-906M00-K238
Parameter Insertion loss Pass-band ripple Conditions 887 MHz to 925 MHz 887 MHz to 925 MHz DC to 720 MHz 720 MHz to 800 MHz Absolute stop-band attenuation 832 MHz to 870 MHz 940 MHz to 942 MHz 942 MHz to 950 MHz 950 MHz to 2000 MHz 2000 MHz to 3000 MHz Pass-band VSWR (Return loss) 887 MHz to 925 MHz Value Min 23 25 37 15 20 25 20 (5.6) Typ 2.7 1.0 25 27 40 23 28 30 25 2.2 (8.5) Max 4.0 2.3 3.2 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB dB dB (dB) Remarks
(Continued)
15
F5/F6 Series (K2 type)
(Continued)
Part number : FAR-F5CE-906M00-K238
S21 log MAG 5 dB/ 4 REF 0 dB 1 : -41.253 dB 832 MHz 2 : -48.17 dB 870 MHz 3 : -2.6208 dB 887 MHz 4 : -2.4256 dB 925 MHz 5 : -27.508 dB 940 MHz 5 1 1 5 S11 1U FS 1: 1.8677 -14.857 12.876 pF
3
832.000 000 MHz
2 : 3.0369 3.521 870 MHz 3 : 44.107 -5.9004 887 MHz 3 4 4 : 54.916 -12.906 925 MHz 5 : 20.363 -72.578 940 MHz
2
CENTER 900 MHz S11 SWR 1
2 1/ 2 REF1
SPAN 300 MHz
CENTER 900 MHz S22 1U FS 1: 2.25
SPAN 300 MHz -14.564 13.135 pF
5
1 : 29.134 832 MHz 2 : 16.546 870 MHz 3 : 1.1948 887 MHz 4 : 1.3015 925 MHz 5 : 7.9264 940 MHz
2
832.000 000 MHz
2 : 3.4901 3.7628 870 MHz 3 : 38.686 -2.4785 887 MHz 3 1 4 4 : 56.012 -12.115 925 MHz 5 : 18.953 -70.027 940 MHz SPAN 300 MHz
S22
SWR
1 2
3
1/
4 REF1 1 : 24.097 832 MHz 2 : 14.402 870 MHz 3 : 1.3005 887 MHz 4 : 1.2912 925 MHz 5 : 8.0814 940 MHz SPAN 300 MHz
5
5
CENTER 900 MHz
3
4
CENTER 900 MHz
16
F5/F6 Series (K2 type)
10. J-CDMA (Rx) Part number : FAR-F5CE-851M00-K212
Parameter Insertion loss Pass-band ripple Conditions 832 MHz to 870 MHz 832 MHz to 870 MHz DC to 170 MHz 170 MHz to 720 MHz 720 MHz to 770 MHz Absolute stop-band attenuation 770 MHz to 815 MHz 818 MHz 887 MHz to 897 MHz 897 MHz to 925 MHz 925 MHz to 1100 MHz 1100 MHz to 2000 MHz Pass-band VSWR (Return loss) 832 MHz to 870 MHz Value Min 20 18 20 25 15 20 23 22 20 -- (6.0) Typ 2.5 1.0 24 20 22 27 40 30 25 24 24 2.7 (6.8) Max 3.5 2.0 3.0 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB dB dB dB dB (dB) Remarks
(Continued)
17
F5/F6 Series (K2 type)
(Continued)
Part number : FAR-F5CE-851M00-K212
S21 log MAG 5 dB/ 2 REF 0 dB S11 1 : -37.899 dB 818 MHz 2 : -2.5981 dB 832 MHz 3 : -1.9478 dB 870 MHz 4 : -27.923 dB 887 MHz 1U FS 1: 3.2582 1.4034 273.06 pH 818.000 000 MHz
3
2 : 38.836 -7.2578 832 MHz 1 3 : 58.682 -10.117 870 MHz 2 3 4 : 29.48 -92.918 887 MHz
4 1
4
CENTER 850 MHz
SPAN 300 MHz
CENTER 850 MHz
SPAN 300 MHz
S11
SWR
1
1/
REF1 1 : 15.373 818 MHz 2 : 1.3511 832 MHz 3 : 1.2786 870 MHz 4 : 8.0246 887 MHz
S22
1U FS
1: 2.9063
-13.55 m
14.359 nF
818.000 000 MHz
4
2 : 31.507 -1.1172 832 MHz 1 3 : 58.508 -10.055 870 MHz 3 4 : 25.703 -88.59 887 MHz 4
S22
SWR
12
1/
3
REF1 1 : 17.221 818 MHz 2 : 1.5883 832 MHz 3 : 1.2753 870 MHz 4 : 8.4626 887 MHz SPAN 300 MHz CENTER 850 MHz
2
4
CENTER 850 MHz
2
3
SPAN 300 MHz
18
F5/F6 Series (K2 type)
11. PDC1.5 G (Tx) High Attenuation type Part number : FAR-F6CE-1G4410-K220
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Pass-band VSWR (Return loss) Conditions 1429 MHz to 1453 MHz 1429 MHz to 1453 MHz DC to 1380 MHz 1477 MHz to 1501 MHz 1501 MHz to 1900 MHz 1900 MHz to 2906 MHz 1429 MHz to 1453 MHz Value Min 25 10 30 18 (7.4) Typ 2.2 1.0 27 18 32 28 2.1 (9.0) Max 3.0 2.0 2.5 ()
1: 4.4395
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB (dB)
-32.887
Remarks
S21
log MAG 2
5 dB/
REF 0 dB 1 : -35.074 dB 1.380 GHz 2 : -1.3018 dB 1.429 GHz 3 : -2.0664 dB 1.453 GHz 4 : -20.902 dB 1.477 GHz
S11
1U FS
3.5069 pF 1.380 GHz
3
2 : 46.01 -4.3555 1.429 GHz 3 : 77.621 -5.6797 1.453 GHz 4 : 609.53 -187.66 1.477 GHz
4 2 1 3 4
1
CENTER 1 500 MHz S11 SWR 1 1/ 4 REF1
SPAN 400 MHz
CENTER 1 500 MHz S22 1U FS 1: 3.8748
SPAN 400 MHz -635.86 m 181.37 pF 1.380 GHz
1 : 16.156 1.380 GHz 2 : 1.1309 1.429 GHz 3 : 1.5665 1.453 GHz 4 : 13.351 1.477 GHz 1
2 : 49.662 -3.1699 1.429 GHz 3 : 72.906 -14.336 1.453 GHz 4 : 11.416 -52.465 1.477 GHz
S22
SWR 1
2
3 1/ REF1 1 : 12.906 1.380 GHz 2 : 1.066 1.429 GHz 3 : 1.5587 1.453 GHz 4 : 9.3208 1.477 GHz
2 3
4
4 CENTER 1 500 MHz SPAN 400 MHz
CENTER 1 500 MHz
23
SPAN 400 MHz
19
F5/F6 Series (K2 type)
12. PDC1.5 G (Rx) High Attenuation type Part number : FAR-F6CE-1G4890-K221
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Conditions 1477 MHz to 1501 MHz 1477 MHz to 1501 MHz DC to 1429 MHz 1429 MHz to 1453 MHz 1542 MHz to 1566 MHz 1566 MHz to 1900 MHz 1900 MHz to 3000 MHz Pass-band VSWR (Return loss) 1477 MHz to 1501 MHz Value Min 25 10 20 30 20 (6.8) Typ 2.5 1.0 28 25 28 33 29 2.4 (7.7) Max 3.0 2.0 2.7 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB (dB)
-19.226
Remarks
S21
log MAG
5 dB/ 3
REF 0 dB 1 : -25.931 dB 1.453 GHz 2 : -2.1466 dB 1.477 GHz 3 : -1.8281 dB 1.501 GHz 4 : -38.274 dB 1.542 GHz
S11
1U FS
1: 4.9717
5.6974 pF 1.453 GHz
2
2 : 40.439 -589.84 m 1.477 GHz 3 : 52.203 -5.0625 1.501 GHz 4 : 43.008 -226.07 1.542 GHz
1 23
1 4
4
CENTER 1 500 MHz S11 SWR 1 1/ REF 1 4
SPAN 400 MHz
CENTER 1 500 MHz S22 1U FS 1 : 7.0498 21.054
SPAN 400 MHz 2.3061 nH 1.453 GHz
1 : 11.557 1.453 GHz 2 : 1.2368 1.477 GHz 3 : 1.1141 1.501 GHz 4 : 25.752 1.542 GHz
1
2 : 43.646 -2.9531 1.477 GHz 3 : 48.85 -10.762 1.501 GHz 23 4 : 16.373 -43.947 1.542 GHz
2 S22 SWR 1 1/
3 REF 1 1 : 8.3687 1.453 GHz 2 : 1.1616 1.477 GHz 3 : 1.2443 1.501 GHz 4 : 5.5603 1.542 GHz SPAN 400 MHz CENTER 1 500 MHz
4
4
CENTER 1 500 MHz
2
3
SPAN 400 MHz
20
F5/F6 Series (K2 type)
13. PDC1.5 G (Lo) Part number : FAR-F6CE-1G6190-K222
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Conditions 1607 MHz to 1631 MHz 1607 MHz to 1631 MHz DC to 130 MHz 130 MHz to 1501 MHz 1737 MHz to 1809 MHz 1809 MHz to 2500 MHz 3214 MHz Pass-band VSWR (Return loss) 1607 MHz to 1631 MHz Value Min 30 25 30 25 20 (9.5) Typ 2.4 1.0 38 28 35 35 30 1.8 (10.9) Max 3.3 2.0 2.0 ()
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB (dB)
-16.415
Remarks
S21
log MAG
5 dB/ 3
REF 0 dB 1 : -43.509 dB 1.501 GHz 2 : -2.9735 dB 1.607 GHz 3 : -2.0366 dB 1.631 GHz 4 : -42.287 dB 1.73 GHz
S11
1U FS
1: 2.2588
6.4595 pF 1.501 GHz
2
2 : 43.58 -4.7715 1.607 GHz 3 : 39.982 -19.486 1.631 GHz 2 1 3 4 : 4.5664 -36.547 1.73 GHz
1 4 4 CENTER 1 600 MHz S22 1U FS 1: 2.3193 SPAN 400 MHz -13.745 7.7142 pF 1.501 GHz
CENTER 1 600 MHz S11 SWR 1 1/ REF1
SPAN 400 MHz 4 1 : 24.505 1.501 GHz 2 : 1.1866 1.607 GHz 3 : 1.6246 1.631 GHz 4 : 16.821 1.73 GHz
2 : 45.201 -2.5645 1.607 GHz 3 : 36.947 -17.137 1.631 GHz 4 : 4.209 -35.818 1.73 GHz
S22
SWR
1
2 1/
3 REF1
4 1 : 23.181 1.501 GHz 2 : 1.1212 1.607 GHz 3 : 1.6422 1.631 GHz 4 : 17.994 1.73 GHz 2 1 3
4 CENTER 1 600 MHz SPAN 400 MHz
CENTER 1 600 MHz
2
3 SPAN 400 MHz
21
F5/F6 Series (K2 type)
s MEASURMENT CIRCUIT
2
5
1
3
4
6
1 to 6: Pin number
s PART NUMBER DESIGNATION
[Designation example] FAR-F CE(1) (2) (1) Frequency range -K2 (3) (4) (5)
: 5 : 700 MHz to 1000 MHz 6 : 1000 MHz to 1700 MHz (2) Package size : E : 3.0 mm x 3.0 mm x 1.2 mm (3) Frequency : This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 906.0 MHz 906M00 1.441GHz 1G4410 (4) Part symbol : Numbers specified by FUJITSU MEDIA DEVICE Refer to "sSTANDARD DEVICES". (5) Packing (Reeled tape) : Y : 1 k pcs/reel X : 5 k pcs/reel
22
F5/F6 Series (K2 type)
s MARKING *LOGO PART SYMBOL
DATE CODE
F 11 B1
LOT No.
INDEX
*: For the following parts, "K" is marked in place of "F". FAR-F5CE-836M50-K230 FAR-F5CE-897M50-K231 FAR-F5CE-906M50-K238
23
F5/F6 Series (K2 type)
s PACKAGE DIMENSION
3.0
3.0 2-R 0.2
1
1.5
2
0.6
3
6
4-R 0.3 1.2
5
1.2
4
0.75
0.4
0.75
1.2 Max.
Dimensions in mm.
24
F5/F6 Series (K2 type)
s RECOMMENDED LAND PATTERN
3.0
3.0
0.75
0.70 1.5
1.20
1.20
0.2
0.75
1.5
0.95
Dimensions in mm.
25
F5/F6 Series (K2 type)
s PACKING
1. Reel Dimensions
9.5 0.5 1.5 Min 12.8 Min
Type
250 80
Volume 1 k pcs 5 k pcs
Y X
20.2 Min R0.58
13.8 Max
Dimensions in mm.
2. Packing Style
Reel side
Pulling side
1P IN Pulling side
26
F5/F6 Series (K2 type)
3. Tape Dimensions
4.0 0.1 2.0 0.05 1.5 0.0
0.1
0.3 0.05
1.75 0.1 3.5 0.05
3.3 0.1
1.0 Min. 3.3 0.1
4.0 0.1
1.3 0.1
Dimensions in mm.
4. Peel strength of top cover tape
Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA)
Direction of pulling Speed 300 mm/min 165 to 180
Embossment carrier type tape
8.0 0.2
27
F5/F6 Series (K2 type)
s RECOMMENDED REFLOW PROFILE
240 10 s
Temperature (C)
Heating rate 1C/s to 4C/s 210
Air cooling 60 s Pre-Heating 150 60 s 90 s
Time (s)
s NOTE
A mass-produced product order is accepted by a unit of 1000.
28
F5/F6 Series (K2 type)
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
F0308 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of E423117

	To Download E423117 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .