 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SSM6P05FU TOSHIBA Field Effect Transistor Silicon P Channel MOS Type SSM6P05FU Power Management Switch High Speed Switching Applications * * * Small package Low on resistance : Ron = 3.3 (max) (@VGS = -4 V) : Ron = 4.0 (max) (@VGS = -2.5 V) Low gate threshold voltage Maximum Ratings (Ta = 25C) (Q1, Q2 Common) Characteristics Drain-Source voltage Gate-Source voltage Drain current DC Pulse Drain power dissipation (Ta = 25C) Channel temperature Storage temperature range Symbol VDS VGSS ID IDP PD (Note1) Tch Tstg Rating -20 12 -200 -400 300 150 -55~150 Unit V V mA mW C C Note1: Total rating, mounted on FR4 board 2 (25.4 mm x 25.4 mm x 1.6 t, Cu Pad: 0.32 mm x 6) Handling Precaution When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 000707EAA1 * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 2000-07-19 1/4 SSM6P05FU Marking 6 5 4 Equivalent Circuit (top view) 6 5 4 DH 1 2 3 1 Q1 Q2 2 3 Electrical Characteristics (Ta = 25C) (Q1, Q2 common) Characteristics Gate leakage current Drain-Source breakdown voltage Drain cut-off current Gate threshold voltage Forward transfer admittance Drain-Source ON resistance Input capacitance Reverse transfer capacitance Output capacitance Switching time Turn-on time Turn-off time Symbol IGSS V (BR) DSS IDSS Vth Yfs RDS (ON) Ciss Crss Coss ton toff VDD = -3 V, ID = -50 mA, VGS = 0~-2.5 V VDS = -3 V, VGS = 0, f = 1 MHz Test Condition VGS = 12 V, VDS = 0 ID = -1 mA, VGS = 0 VDS = -20 V, VGS = 0 VDS = -3 V, ID = -0.1 mA VDS = -3 V, ID = -50 mA (Note2) Min -20 -0.6 100 Typ. 2.1 3.2 27 7 21 70 70 Max 1 -1 -1.1 3.3 4.0 Unit A V A V mS pF pF pF ns ID = -100 mA, VGS = -4 V (Note2) ID = -50 mA, VGS = -2.5 V (Note2) Note2: Pulse test Switching Time Test Circuit (Q1, Q2 common) (a) Test circuit 0 -2.5 V 10 s VDD = -3 V Duty < 1% = VIN: tr, tf < 5 ns (Zout = 50 ) Common Source Ta = 25C OUT IN 50 RL VDD -2.5 V 90% (b) VIN 0V 10% (c) VOUT VDS (ON) 90% VDD 10% tr ton tf toff Precaution Vth can be expressed as voltage between gate and source when low operating current value is ID = -100 A for this product. For normal switching operation, VGS (on) requires higher voltage than Vth and VGS (off) requires lower voltage than Vth. (Relationship can be established as follows: VGS (off) < Vth < VGS (on) ) Please take this into consideration for using the device. VGS recommended voltage of -2.5 V or higher to turn on this product. 2000-07-19 2/4 SSM6P05FU (Q1, Q2 common) ID - VDS -500 Common Source Ta = 25C -10 -300 -4 -3 -2.5 -2.3 -2.1 -200 -1.9 -1.7 VGS = -1.5 V 0 0 -0.01 0 -1000 Common Source VDS = -3 V -100 ID - VGS -400 (mA) (mA) Drain current ID -10 Ta = 100C -1 25C -0.1 -25C -2.0 Drain current ID -100 -0.5 -1.0 -1.5 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 Drain-Source voltage VDS (V) Gate-Source voltage VGS (V) RDS (ON) - ID 6 Common Source Ta = 25C 5 5 -2.5 V 6 RDS (ON) - VGS Common Source ID = -50 mA Drain-Source on resistance RDS (ON) () 4 Drain-Source on resistance RDS (ON) () 4 3 VGS = -4 V 2 3 Ta = 100C 2 25C 1 1 -25C 0 0 -100 -200 -300 -400 -500 0 0 -2 -4 -6 -8 -10 Drain current ID (mA) Gate-Source voltage VGS (V) RDS (ON) - Ta 6 Common Source 5 1000 Common Source Yfs - ID VDS = -3 V 500 Ta = 25C 300 Drain-Source on resistance RDS (ON) () 4 -2.5 V, -50 mA 3 2 VGS = -4 V, ID = -100 mA Forward transfer admittance Yfs (mS) 100 1 50 30 -10 0 -25 0 25 50 75 100 125 150 -30 -50 -100 -300 -500 -1000 Ambient temperature Ta (C) Drain current ID (mA) 2000-07-19 3/4 SSM6P05FU (Q1, Q2 common) IDR - VDS -500 Common Source 100 VGS = 0 Ta = 25C D -300 G IDR S 50 C - VDS (mA) (pF) -400 30 Ciss Coss Drain reverse current IDR Capacitance C 10 5 Common Source 3 VGS = 0 f = 1 MHz Ta = 25C 1 -0.1 -0.3 -1 -3 -10 -30 Crss -200 -100 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Drain-Source voltage VDS (V) Drain-Source voltage VDS (V) t - ID 1000 Common Source 500 400 PD* - Ta Mounted on FR4 board. Switching time t (ns) 300 toff Ta = 25C Drain power dissipation PD* (mW) VDD = -3 V VGS = 0~-2.5 V (25.4 mm x 25.4 mm x 1.6 t 2 Cu Pad: 0.32 mm x 6) 300 100 50 30 tf 200 ton tr 100 10 -1 -3 -10 -30 -100 -300 0 0 20 40 60 80 100 120 140 160 Drain current ID (mA) Ambient temperature Ta (C) *: Total rating 2000-07-19 4/4 |
Price & Availability of EA10046
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |