01/16/01
Errata: CDB61881 Rev. 1
(Reference CDB61881 Data Sheet revision DS451DB1 dated Jan ` 01)
1. RPD JUMPER (J1) silk screen labeled incorrectly
The RPD jumper (J1) labels are reversed. To correctly connect tie the RPD pin low place a jumper as shown in the following diagram.
RPD LOW HIGH J1
If there are any questions concerning this information, Please contact your local sales office, distributor, or representative. A list of these may be found at http://www.cirrus.com or by calling (800) 888-5016
Cirrus Logic P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.cirrus.com
ER451B1 JAN ` 01 1
|
