Part Number Hot Search : 
AD572B 3C1850 MPA201 12013 RSFKL 20A10 11000 3DC11CAP
Product Description
Full Text Search
 

To Download NJM2894 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 NJM2894
3OUTPUT LOW DROPOUT VOLTAGE REGULATOR
GENRAL DESCRIPTION The NJM2894 is a 3ch low dropout voltage regulator with ON/OFF Control in TVSP-8 package. It is suitable for camcorder, IC decoder, camera and other portable items. FEATURES High Ripple Rejection 75dB typ. at f=1kHz Low Noise 45Vrms typ. Output capacitor with 1.0F ceramic capacitor at Vo2.7V Output Current Io(max.)=ch1=150mA ,ch2,3=80mA High Precision Output 1.0% Low Dropout Voltage 0.1V typ. at Io=60mA ON/OFF Control Internal Thermal Overload Protection Internal Short Circuit Current Limit Bipolar Technology Package Outline TVSP-8 PIN CONFIGURATION
1 2 3 4 8 7 6 5
Preliminary
PACKAGE OUTLINE
NJM2894RB1
NJM2894RB1 EQUIVALENT CIRCUIT
VIN CONTROL1
PIN FUNCTION 1. VOUT1 5. CONTROL3 2. VOUT2 6. CONTROL2 3. VOUT3 7. CONTROL1 4. GND 8. VIN
VOUT1
Thermal Protection
Bandgap Reference
VOUT2 CONTROL2
VOUT3 CONTROL3
GND
Ver.2003-03-11
-1-
NJM2894
Preliminary ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VIN Control Voltage VCONT Power Dissipation PD Operating Temperature Topr Storage Temperature Tstg RATINGS +14 +14(note1) 320 -40 to +85 -40 to+125 (Ta=25C) UNIT V V mW C C
(note1)When input voltage is less than +14V, the absolute maximum control voltage is equal to the input voltage. ERECRICAL CHARACTERISTICS (VIN=Vo+1V, CIN=0.1F, Co=1.0F: Vo2.7V (Co=2.2F: Vo2.6V), Ta=25C) PARAMETER SYMBOL TEST CONDITION Output Voltage Vo Io=30mA Quiescent Current1 IQ1 VCONT1= VIN, VCONT2= VCONT3= 0V *1ch ON Io=0mA, expect Icont Quiescent Current2 IQ2 VCONT1= VCONT2= VIN, VCONT3= 0V *2ch ON Io=0mA, expect Icont Quiescent Current3 IQ3 VCONT1= VCONT2= VCONT3= VIN Io=0mA, expect Icont Quiescent Current at IQ(OFF) VCONT=0V Control OFF Output Current 1 Io1 Ch1 : Vo-0.3V Output Current 2 Io2 Ch2,3 : Vo-0.3V Line Regulation Vo/VIN VIN=Vo+1V to Vo+6V, Io=30mA Load Regulation 1 Vo/Io1 Ch1 : Io=0 to 100mA Load Regulation 2 Vo/Io2 Ch2,3 : Io=0 to 60mA Dropout Voltage 1 VI-O1 Ch1 : Io=60mA Dropout Voltage 2 VI-O2 Ch2,3 : Io=40mA Ripple Rejection RR ein=200mVrms,f=1kHz,Io=10mA, Vo=3V Average Temperature Coefficient of Output Vo/Ta Ta=0 to 85C, Io=10mA Voltage Output Noise Voltage VNO f=10Hz to 80kHz, Io=10mA, Vo=3V Control Voltage for VCONT(ON) ON-state Control Voltage for VCONT(OFF) OFF-state
MIN. -1.0% 150 80 1.6 -
TYP. 140 240 340 200 100 0.10 0.10 75 50 45 -
MAX. +1.0% 220 370 520 100 0.10 0.03 0.03 0.18 0.18 0.6
UNIT V A A A nA mA mA %/V %/mA %/mA V V dB ppm/C Vrms V V
(note2) Please confirm the specification separately because some parameters depend on output voltage. OUTPUT VOLTAGE RANK LIST Device Name CH1 NJM2893RB1-CCC 2.1V NJM2893RB1-LLL 3.0V NJM2893RB1-YLC 5.0V
VOUT CH2 2.1V 3.0V 3.0V
CH3 2.1V 3.0V 2.1V
-2-
Ver.2003-03-11
NJM2894
Preliminary TEST CIRCUIT
A
VIN
IIN
VIN
VOUT 1
VOUT1 IOUT 1 V
1.0F or 2.2F(Vo2.6V)
0.1F
NJM2894
A
ICONT
CONTROL1
VOUT2 VOUT2 IOUT2 V
1.0F or 2.2F(Vo2.6V)
V VCONT1
A V VCONT2
ICONT2
CONTROL2
VOUT3 VOUT3 IOUT 3 V
1.0F or 2.2F(Vo2.6V)
A V VCONT3
ICONT3
CONTROL
GND
Ver.2003-03-11
-3-
NJM2894
Preliminary TYPICAL APPLICATION (1) In the case where ON/OFF Control is not required:
VIN
0.1F
VIN
VOUT1
VOUT1
1.0F or 2.2F(Vo2.6V)
NJM2894
R1 (0300k) CONTROL
VOUT2
VOUT2
1.0F or 2.2F(Vo2.6V)
R2 (0300k)
CONTROL
VOUT3
R3 (0300k)
VOUT3
1.0F or 2.2F(Vo2.6V)
CONTROL
GND
Connect control terminal to VIN terminal In case a resistance "R" is used, the quiescent current will be decreased. However, the but minimum operating voltage will be increase as well. Please refer to a figure of Output Voltage vs. Control Voltage.
-4-
Ver.2003-03-11
NJM2894
(2)In use of ON/OFF Control:
VIN
VIN
VOUT1
VOUT1
1.0F or 2.2F(Vo2.6V)
0.1F R1 R2 R3
NJM2894
CONTROL1 VOUT2
VOUT2
1.0F or 2.2F(Vo2.6V)
CONTROL2
VOUT3
VOUT3
1.0F or 2.2F(Vo2.6V)
CONTROL3
GND
In case the control terminal is "H", the output is enabled. The control terminal is "L" or "open", the output is disabled.
Ver.2003-03-11
-5-
NJM2894
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
-6-
Ver.2003-03-11


▲Up To Search▲   

 
Price & Availability of NJM2894

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X