View ON1813_996469.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MCR22-6/D
Silicon Controlled Rectifiers
. . . designed and tested for repetitive peak operation required for CD ignition, fuel ignitors, flash circuits, motor controls and low-power switching applications. * * * * 150 Amperes for 2 s Safe Area High dv/dt Very Low Forward "On" Voltage at High Current Low-Cost TO-226AA (TO-92)
MCR22 6 MCR22 8
SCRs 1.5 AMPERES RMS 400 thru 600 VOLTS
G A K
K G A
CASE 29-11 (TO-226AA) STYLE 10
MAXIMUM RATINGS (TJ = 25C unless otherwise noted.)
Rating Peak Repetitive Forward and Reverse Blocking Voltage (RGK = IK, TJ = 25 to 125C) On-State Current RMS (All Conduction Angles) Peak Non-repetitive Surge Current, TA = 25C (1/2 Cycle, Sine Wave, 60 Hz) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power, TA = 25C Average Gate Power, TA = 25C Peak Forward Gate Current, TA = 25C (300 s, 120 PPS) Peak Reverse Gate Voltage Operating Junction Temperature Range @ Rated VRRM and VDRM Storage Temperature Range Lead Solder Temperature (Lead Length 1/16I from case, 10 s Max) MCR22-6 MCR22-8 Symbol VDRM, VRRM IT(RMS) ITSM I2t PGM PG(AV) IFGM VRGM TJ Tstg -- Value 400 600 1.5 15 0.9 0.5 0.1 0.2 5 -40 to +125 -40 to +150 +230 Amps Amps A2s Watt Watt Amp Volts C C C Unit Volts
q
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Motorola Thyristor Device Data (c) Motorola, Inc. 1998
1
MCR22 6 MCR22 8
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 50 160 Unit C/W C/W
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted. RGK = 1000 Ohms.)
Characteristic Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) Forward "On" Voltage (ITM = 1 A Peak) Gate Trigger Current (Continuous dc)(1) (Anode Voltage = 6 Vdc, RL = 100 Ohms) Gate Trigger Voltage (Continuous dc) (Anode Voltage = 7 Vdc, RL = 100 Ohms) (Anode Voltage = Rated VDRM, RL = 100 Ohms) Holding Current (Anode Voltage = 12 Vdc) Forward Voltage Application Rate (TC = 125C) 1. RGK Current Not Included in Measurement. TC = 25C TC = -40C TC = 25C TC = -40C TC = 125C TC = 25C TC = -40C TC = 25C TC = 125C VTM IGT VGT VGD IH dv/dt Symbol IDRM, IRRM -- -- -- -- -- -- -- 0.1 -- -- -- -- -- 1.2 30 -- -- -- -- 2 -- 25 10 200 1.7 200 500 0.8 1.2 -- 5 10 -- Min Typ Max Unit A A Volts A Volts
mA V/s
CURRENT DERATING
TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C)
FIGURE 1 -- MAXIMUM CASE TEMPERATURE
TA , MAXIMUM ALLOWABLE AMBIENT TEMPERATURE ( C)
FIGURE 2 -- MAXIMUM AMBIENT TEMPERATURE
140
140 120 100 80 60 40 20 0 0 = 180 = CONDUCTION ANGLE 0.2 0.4 0.6 dc
100 = 180 = CONDUCTION ANGLE dc
60
20 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IT(AV), AVERAGE ON-STATE CURRENT (AMPS)
0.8
1.0
IT(AV), AVERAGE ON-STATE CURRENT (AMP)
2
Motorola Thyristor Device Data
MCR22 6 MCR22 8
FIGURE 3 -- TYPICAL FORWARD VOLTAGE
5.0
3.0 2.0 TJ = 125C 25C 1.0 I T , INSTANTANEOUS ON-STATE CURRENT (AMP) 0.7 0.5
0.3 0.2
0.1 0.07 0.05
0.03 0.02
0.01 0 0.5 1.0 1.5 2.0 2.5 VT, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS)
FIGURE 4 -- THERMAL RESPONSE
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 0.01 0.1
0.2
0.5
1.0
2.0
5.0
10
20
50 t, TIME (ms)
100
200
500
1000
2000
5000
10000
Motorola Thyristor Device Data
3
MCR22 6 MCR22 8
TYPICAL CHARACTERISTICS
FIGURE 5 -- GATE TRIGGER VOLTAGE
VG , GATE TRIGGER VOLTAGE (VOLTS) 0.8 I GT GATE TRIGGER CURRENT ( A) 0.7 VAK = 7.0 V RL = 100 100 50 30 20 10 5.0 3.0 2.0
FIGURE 6 -- TYPICAL GATE TRIGGER CURRENT
0.6
0.5
0.4 0.3 -75
-50
-25
0
25
50
75
100
125
1.0 -40
-20
0
20
40
60
80
100
120
140
160
TJ, JUNCTION TEMPERATURE (C)
TJ JUNCTION TEMPERATURE (C)
FIGURE 7 -- HOLDING CURRENT
10 I H , HOLDING CURRENT (mA)
P(AV) MAXIMUM AVERAGE POWER DISSIPATION (WATTS)
FIGURE 8 -- POWER DISSIPATION
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IT(AV), AVERAGE ON-STATE CURRENT (AMPS) dc 30 60 90 120 180
5.0
VAK = 12 V RL = 100
2.0
1.0 -40
-20
0
20
40
60
80
100
120
140
160
TJ, JUNCTION TEMPERATURE (C)
4
Motorola Thyristor Device Data
MCR22 6 MCR22 8
PACKAGE DIMENSIONS
A R P L
SEATING PLANE
B
STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 ---
K
XX G H V
1
D J C SECTION X-X N N
DIM A B C D G H J K L N P R V
CASE 29-11 (TO-226AA) ISSUE AJ
Motorola Thyristor Device Data
5
MCR22 6 MCR22 8
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
6
Motorola Thyristor Device Data MCR22-6/D

▲Up To Search▲

Price & Availability of ON1813

	To Download ON1813 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .