View PA91_1025851.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FEATURES
* * * * * HIGH VOLTAGE -- 450V (225V) LOW QUIESCENT CURRENT -- 10mA HIGH OUTPUT CURRENT -- 200mA PROGRAMMABLE CURRENT LIMIT HIGH SLEW RATE -- 300V/s
APPLICATIONS
* * * * PIEZOELECTRIC POSITIONING HIGH VOLTAGE INSTRUMENTATION ELECTROSTATIC TRANSDUCERS PROGRAMMABLE POWER SUPPLIES UP TO 440V
12-PIN SIP PACKAGE STYLE DP
Formed leads available with package styles ED & EE
TYPICAL APPLICATION

DESCRIPTION
The PA91 is a high voltage, low quiescent current MOSFET operational amplifier designed as a low cost solution for driving continuous output currents up to 200mA and pulse currents up to 350mA. The safe operating area (SOA) has no second breakdown limitations and can be observed for all type loads by choosing an appropriate current limiting resistor. The MOSFET output stage is biased AB for linear operation. External compensation provides flexibility in choosing bandwidth and slew rate for the application. APEX's Power SIP package uses a minimum of board space allowing for high density circuit boards. The 12-pin PowerSIP package is electrically isolated.

LOW POWER, PIEZOELECTRIC POSITIONING Piezo positioning may be applied to the focusing of segmented mirror systems. The composite mirror may be composed of hundreds of elements, each requiring focusing under computer control. In such complex systems the PA91 reduces the costs of power supplies and cooling with its advantages of low cost and low quiescent power consumption while increasing circuit density with the SIP package.
EQUIVALENT SCHEMATIC

PHASE COMPENSATION
GAIN CC* RC 1 68pF 100 5 10pF 100 10 4.7pF 0 30 NONE 0 *CC To be rated for the full supply voltage +V to -Vs. Use NPO ceramic (COG) type.

EXTERNAL CONNECTIONS

APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL prodlit@apexmicrotech.com
1
PA91
ABSOLUTE MAXIMUM RATINGS
SUPPLY VOLTAGE, +VS to -VS OUTPUT CURRENT, source, sink, peak POWER DISSIPATION, continuous @ TC = 25C INPUT VOLTAGE, differential INPUT VOLTAGE, common mode TEMPERATURE, pin solder - 10s max. TEMPERATURE, junction2 TEMPERATURE RANGE, storage OPERATING TEMPERATURE RANGE, case
ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS
450V 350mA, within SOA 30W 20V VS 260C 150C -40 to +85C -25 to +85C
SPECIFICATIONS
PARAMETER INPUT OFFSET VOLTAGE, initial OFFSET VOLTAGE, vs. temperature OFFSET VOLTAGE, vs. supply OFFSET VOLTAGE, vs. time BIAS CURRENT, initial BIAS CURRENT, vs. supply OFFSET CURRENT, initial INPUT IMPEDANCE, DC INPUT CAPACITANCE COMMON MODE VOLTAGE RANGE3 COMMON MODE REJECTION, DC NOISE GAIN OPEN LOOP, @ 15Hz GAIN BANDWIDTH PRODUCT at 1MHz POWER BANDWIDTH PHASE MARGIN OUTPUT VOLTAGE SWING3 CURRENT, continuous SLEW RATE, AV = 100 CAPACITIVE LOAD, AV = +1 SETTLING TIME to .1% RESISTANCE, no load POWER SUPPLY VOLTAGE 5 CURRENT, quiescent, THERMAL RESISTANCE, AC, junction to case 4 RESISTANCE, DC, junction to case RESISTANCE, junction to air TEMPERATURE RANGE, case TEST CONDITIONS 1 MIN TYP .5 15 10 75 200 4 50 1011 4 VS 15 80 98 1 111 100 470 60 VS 10 300 1 50 40 150 10 225 14 2.5 4.2 30 -25 +85 MAX 2 50 25 2000 500 UNITS mV V/C V/V V/kh pA pA/V pA pF V dB Vrms dB MHz kHz V mA V/s pF s V mA C/W C/W C/W C
Full temperature range
VCM = 90V 100KHz BW, RS = 1K, CC = OPEN RL = 2K, CC = OPEN RL = 2K, CC = OPEN RL = 2K, CC = OPEN Full temperature range IO = 200mA CC = OPEN Full temperature range CC = OPEN, 2V step
94
VS 12 200 240 470
See note 5
Full temperature range, F > 60Hz Full temperature range, F < 60Hz Full temperature range Meets full range specifications
NOTES: 1. Unless otherwise noted: TC = 25C, DC input specifications are value given. Power supply voltage is typical rating. RC = 100 CC = 68pF. 2. Long term operation at the maximum junction temperature will result in reduced product life. Derate internal power dissipation to achieve high MTTF. 3. +VS and -VS denote the positive and negative power supply rail respectively. 4. Rating applies if the output current alternates between both output transistors at a rate faster than 60Hz. 5. Derate max supply rating .625 V/C below 25C case. No derating needed above 25C case.
CAUTION
The PA91 is constructed from MOSFET transistors. ESD handling procedures must be observed. The exposed substrate contains beryllia (BeO). Do not crush, machine, or subject to temperatures in excess of 850C to avoid generating toxic fumes.
APEX MICROTECHNOLOGY CORPORATION * 5980 NORTH SHANNON ROAD * TUCSON, ARIZONA 85741 * USA * APPLICATIONS HOTLINE: 1 (800) 546-2739
2
TYPICAL PERFORMANCE GRAPHS
PA91

APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * ORDERS (520) 690-8601 * EMAIL prodlit@apexmicrotech.com
3
PA91
GENERAL
Please read Application Note 1 "General Operating Considerations" which covers stability, supplies, heat sinking, mounting, current limit, SOA interpretation, and specification interpretation. Visit www.apexmicrotech.com for design tools that help automate tasks such as calculations for stability, internal power dissipation, current limit; heat sink selection; Apex's complete Application Notes library; Technical Seminar Workbook; and Evaluation Kits.
OPERATING CONSIDERATIONS
INPUT PROTECTION
Although the PA91 can withstand differential voltages up to 20V, additional external protection is recommended. Low leakage, low capacitance JFETs connected as diodes are recommended (e.g. 2N4416, Q1-Q4 in Figure 2). The differential input voltage will be clamped to 1.4V. This is sufficient overdrive to produce maximum power bandwidth.
POWER SUPPLY PROTECTION
Unidirectional zener diode transient suppressors are recommended as protection on the supply pins. See Figure 2. The zeners clamp transients to voltages within the power supply rating and also clamp power supply reversals to ground. Whether the zeners are used or not, the system power supply should be evaluated for transient performance including power-on overshoot and power-off polarity reversals as well as line regulation. Conditions which can cause open circuits or polarity reversals on either power supply rail should be avoided or protected against. Reversals or opens on the negative supply rail is known to induce input stage failure. Unidirectional transzorbs prevent this, and it is desirable that they be both electrically and physically as close to the amplifier as possible.
CURRENT LIMIT
For proper operation, the current limit resistor (RCL) must be connected as shown in the external connection diagram. For optimum reliability the resistor value should be set as high as possible. The value is calculated as follows; with the maximum practical value of 32 ohms. .65 RCL = ILIM
SAFE OPERATING AREA (SOA)
The MOSFET output stage of this power operational amplifier has two distinct limitations: 1. The current handling capability of the MOSFET geometry and the wire bonds. 2. The junction temperature of the output MOSFETs. NOTE: The output stage is protected against transient flyback. However, for protection against sustained, high energy flyback, external fast-recovery diodes should be used.
STABILITY
The PA91 is externally compensated and performance can be tailored to the application. Use the graphs of small signal response and power response as a guide. The compensation capacitor CC must be rated at 500V working voltage. An NPO capacitor is recommended. The compensation network CCRC must be mounted closely to the amplifier pins 4 and 5 to avoid spurious oscillation.
SAFE OPERATING CURVES
The safe operating area curves define the maximum additional internal power dissipation the amplifier can tolerate when it produces the necessary output to drive an external load.
QUIESCENT CURRENT REDUCTION
When pin 3 (IQ) is shorted to pin 5 (CC2) the AB biasing of the output stage is disabled. This raises distortion since the output stage is then class C biased, but reduces the quiescent current by 1mA for a power dissipation savings of 0.4W. Pin 3 may be left open if not used.

This data sheet has been carefully checked and is believed to be reliable, SHANNON ROAD * is assumed ARIZONA 85741 * USA * APPLICATIONS are subject 1 (800) 546-2739 APEX MICROTECHNOLOGY CORPORATION * 5980 NORTH however, no responsibility TUCSON, for possible inaccuracies or omissions. All specificationsHOTLINE: to change without notice.
4
PA91U REV F OCTOBER 2004 (c) 2004 Apex Microtechnology Corp.

▲Up To Search▲

Price & Availability of PA91

	To Download PA91 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .