|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN8123 2SA2153 2SA2153 Applications * PNP Epitaxial Planar Silicon Transistor High-Current Switching Applications Voltage regulators, relay drivers, lamp drivers, electrical equipment. Features * * * Adoption of MBIT process. Low saturation voltage. High current capacity and wide ASO. Specifications Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (450mm2!0.8mm) Tc=25C Conditions Ratings --50 --50 --6 --2 --4 --400 1.3 3.5 150 --55 to +150 Unit V V V A A mA W W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE1 hFE2 fT Cob VCE(sat) VBE(sat) VCB=-40V, IE=0 VEB=--4V, IC=0 VCE=-2V, IC=-100mA VCE=-2V, IC=-1.5A VCE=-10V, IC=-300mA VCB=-10V, f=1MHz IC=-1A, IB=--50mA IC=-1A, IB=--50mA 200 40 420 16 --0.2 --0.9 --0.4 --1.2 MHz pF V V Conditions Ratings min typ max --1 --1 560 Unit A A Marking : AZ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21805EA TS IM TB-00000664 No.8123-1/4 2SA2153 Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=-10A, IE=0 IC=-1mA, RBE= IE=--10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --50 --50 --6 35 200 24 typ max Unit V V V ns ns ns Package Dimensions unit : mm 2038B 4.5 1.6 1.5 Switching Time Test Circuit PW=20s D.C.1% INPUT VR IB1 IB2 IC OUTPUT RB + 100F + 470F 2.5 RL 4.0 1 0.4 0.5 1.5 2 3 0.4 VBE=5V VCC= --25V 10IB1= --10IB2= IC= --700mA 3.0 0.75 1.0 50 1 : Base 2 : Collector 3 : Emitter SANYO : PCP --2.0 --1.8 IC -- VCE 0 --5 mA --60 --2.0 IC -- VBE VCE= --2V mA Collector Current, IC -- A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 Collector Current, IC -- A --1.6 mA --40 mA --30 mA --20 --10mA --5mA --4mA --3mA --2mA --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.4 --1mA --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --0.2 IB=0 --1.8 --2.0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 Collector-to-Emitter Voltage, VCE -- V IT08346 Base-to-Emitter Voltage, VBE -- V Ta= 7 5C 25 C --25 C --0.6 IT08347 No.8123-2/4 2SA2153 7 5 hFE -- IC VCE= --2V Gain-Bandwidth Product, fT -- MHz 1000 7 5 fT -- IC VCE= --10V Ta=75C 3 25C --25C DC Current Gain, hFE 2 3 2 100 7 5 100 7 5 --0.01 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 Collector Current, IC -- A 7 5 IT08348 --1.0 Cob -- VCB f=1MHz Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector Current, IC -- A IT08349 VCE(sat) -- IC 7 5 3 2 IC / IB=20 Output Capacitance, Cob -- pF 3 2 --0.1 7 5 3 2 = Ta 10 7 5 --0.1 C 75 5C --2 C 25 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT08350 --0.01 --0.01 Collector-to-Base Voltage, VCB -- V 3 VBE(sat) -- IC Collector Current, IC -- A 7 5 3 2 IT08351 ASO IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 ICP= --4A IC= --2A 50 0 <10s 10 0 s Collector Current, IC -- A --1.0 --1.0 7 5 3 2 --0.1 7 5 3 2 10 0m s DC 1m 10 s m s op er ati on s Ta= --25C 7 5 25C 75C 3 Tc=25C Single pulse 2 3 5 7 --1.0 2 3 5 7 --10 2 3 57 IT08353 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 --0.01 --0.1 Collector Current, IC -- A 1.4 1.3 1.2 IT08352 4.0 3.5 PC -- Ta Collector-to-Emitter Voltage, VCE -- V PC -- Tc M Collector Dissipation, PC -- W nt 1.0 ed Collector Dissipation, PC -- W 160 ou on 3.0 2.5 2.0 1.5 1.0 0.5 0 ac 0.8 er am ic bo 0.6 ar d (4 50 m 0.4 m2 ! 0. 8m m 0.2 0 0 20 40 60 80 100 120 ) 140 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT08354 Case Temperature, Tc -- C IT08355 No.8123-3/4 2SA2153 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2005. Specifications and information herein are subject to change without notice. PS No.8123-4/4 |
Price & Availability of 2SA2153 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |