![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone:(562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT2907A2 Series Dual Microminiature Package 600 mA 60 Volts Dual PNP Transistor Features: * * * * * * High Speed Switching Transistor Multiple Devices Reduce Board Space High Power Dissipation: Up to 600 mW Replacement for 2N2907AU TX, TXV, S-Level Screening Available NPN Complimentary Parts Available (SFT2222A2) DESIGNER'S DATA SHEET Part Number / Ordering Information 1/ SFT2907A2 __ __ Screening 2/ __ = Commercial TX = TX Level TXV = TXV Level S = S Level Package GW = Gullwing Maximum Ratings Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Continuous Collector Current Power Dissipation @ TA = 25C Operating & Storage Temperature Maximum Thermal Resistance (Junction to PCB) Gullwing (GW) Per Device Total Symbol VCEO VCBO VEBO IC PD TOP & Tstg RJ-PCB Value 60 60 5 600 500 660 -65 to +200 245 Units Volts Volts Volts mA mW C C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0031D DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT2907A2 Series Electrical Characteristic 4/ Collector - Emitter Sustaining Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current DC Forward Current Transfer Ratio * IC = 10 mA VCE = 30 V VCB = 50 V VCB = 60 V VCB = 50 V, TA = 150 C VEB = 4.0 V VEB = 5.0 V VCE = 10V, IC = 0.1 mA VCE = 10V, IC = 1.0 mA VCE = 10V, IC = 10 mA VCE = 10V, IC = 150 mA VCE = 10V, IC = 500 mA VCE = 10V, IC = 10 mA, TA = -55C Symbol BVCEO ICES ICBO IEBO Min 60 -- -- -- 75 100 100 100 50 50 -- -- 0.6 -- 200 -- -- -- -- Max -- 50 10 10 10 50 10 -- 450 -- 300 -- -- 0.4 1.6 1.3 2.6 -- 45 300 8.0 30 Units Volts nA nA A A nA A HFE Collector - Emitter Saturation Voltage * Base - Emitter Saturation Voltage * Frequency Transition (Small Signal Current Gain) @ f = 100 MHz Switching Times Output Capacitance Input Capacitance IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA VCE = 20V, IC = 20mA Vcc = 30 V, Ic =150 mA IB1=IB2=15mA, VBE(off) = 3V VCE = 10V, f = 1MHz VCE = 2.0V, f = 1MHz VCE(Sat) VBE(Sat) fT ton toff cob cib Volts Volts MHz ns pF pF NOTES: * Pulse Test: Pulse Width = 300sec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @25C. Available Part Numbers: SFT2907A2GW Package GW Pin 1 Collector1 PIN ASSIGNMENT Pin 2 Pin 3 Pin 4 Base1 Emitter1 Collector2 Pin 5 Base2 Pin 6 Emitter2 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0031D DOC |
Price & Availability of SFT2907A2
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |