|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
600V 43A APT6013B2LL APT6013LLL B2LL 0.130 POWER MOS 7 (R) R MOSFET Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg MAXIMUM RATINGS Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current 1 T-MAXTM TO-264 LLL * Increased Power Dissipation * Easier To Drive * Popular T-MAXTM or TO-264 Package D G S All Ratings: TC = 25C unless otherwise specified. APT6013B2LL_LLL UNIT Volts Amps 600 43 172 30 40 565 4.52 -55 to 150 300 43 50 4 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 Volts Watts W/C C Amps mJ (Repetitive and Non-Repetitive) 1 Repetitive Avalanche Energy Single Pulse Avalanche Energy 2500 STATIC ELECTRICAL CHARACTERISTICS Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance 2 MIN TYP MAX UNIT Volts 600 0.130 100 500 100 3 5 (VGS = 10V, ID = 21.5A) Ohms A nA Volts 9-2004 050-7053 Rev C Zero Gate Voltage Drain Current (VDS = 600V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 480V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com DYNAMIC CHARACTERISTICS Symbol C iss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 APT6013B2LL_LLL Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 300V ID = 43A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 300V ID = 43A @ 25C RG = 0.6 6 INDUCTIVE SWITCHING @ 25C VDD = 400V, VGS = 15V ID = 43A, RG = 5 6 INDUCTIVE SWITCHING @ 125C VDD = 400V, VGS = 15V ID = 43A, RG = 5 MIN TYP MAX UNIT 5630 1060 70 130 25 40 11 14 27 8 635 585 1030 695 MIN TYP MAX UNIT Amps Volts ns C nC pF Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy ns J SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS ISM VSD t rr Q rr dv/ dt Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage 1 2 43 172 1.3 700 14.7 8 MIN TYP MAX (Body Diode) (VGS = 0V, IS = -43A) Reverse Recovery Time (IS = -43A, dl S/dt = 100A/s) Reverse Recovery Charge (IS = -43A, dl S/dt = 100A/s) Peak Diode Recovery dv/ dt 5 V/ns THERMAL CHARACTERISTICS Symbol RJC RJA Characteristic Junction to Case Junction to Ambient UNIT C/W 0.22 40 1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471 4 Starting Tj = +25C, L = 2.70mH, RG = 25, Peak IL = 43A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID43A di/dt 700A/s VR 600V TJ 150C 6 Eon includes diode reverse recovery. See figures 18, 20. APT Reserves the right to change, without notice, the specifications and inforation contained herein. 0.25 , THERMAL IMPEDANCE (C/W) 0.20 0.9 0.15 0.7 0.5 0.10 0.3 0.05 0.1 0.05 10-5 10-4 SINGLE PULSE 9-2004 Note: PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2 050-7053 Rev C Z JC 0 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 1 Typical Performance Curves ID, DRAIN CURRENT (AMPERES) Junction temp. (C) RC MODEL 120 100 80 60 40 APT6013B2LL_LLL VGS =15 &10V 8V 0.014 0.006F 7V Power (watts) 0.076 0.019F 6.5V 0.13 Case temperature. (C) 0.278F 6V 20 0 5.5V 5V RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL 160 ID, DRAIN CURRENT (AMPERES) 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.2 V 140 120 100 80 60 40 20 0 VDS> ID (ON) x RDS (ON)MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE 1.15 1.10 1.05 1.00 0.95 0.90 GS NORMALIZED TO = 10V @ I = 21.5A D VGS=10V VGS=20V TJ = +125C TJ = +25C TJ = -55C 01 23 456 78 9 10 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS 0 45 40 ID, DRAIN CURRENT (AMPERES) BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED) 1.15 20 40 60 80 100 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT 35 30 25 20 15 10 5 0 25 1.10 1.05 1.00 0.95 RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED) 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 2.5 I D 0.90 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 = 21.5A = 10V V 2.0 1.5 1.0 VGS(TH), THRESHOLD VOLTAGE (NORMALIZED) GS 0.5 0.0 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, ON-RESISTANCE vs. TEMPERATURE -25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE 050-7053 Rev C 9-2004 172 ID, DRAIN CURRENT (AMPERES) 100 OPERATION HERE LIMITED BY RDS (ON) 20,000 10,000 APT6013B2LL_LLL Ciss C, CAPACITANCE (pF) 100S 10 1mS TC =+25C TJ =+150C SINGLE PULSE 1,000 Coss 100 Crss 10mS 10 0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE 200 100 I D = 43A 12 VDS= 120V 8 VDS= 300V VDS= 480V IDR, REVERSE DRAIN CURRENT (AMPERES) VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA 16 1 TJ =+150C TJ =+25C 10 4 40 80 120 160 200 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE 100 td(off) 80 0 0 1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 120 V DD G = 400V R = 5 100 80 tr and tf (ns) T = 125C J L = 100H V DD G td(on) and td(off) (ns) = 400V 60 R = 5 T = 125C J L = 100H 60 40 tf 40 td(on) tr 20 20 0 10 0 10 40 50 60 70 ID (A) FIGURE 14, DELAY TIMES vs CURRENT DD G 20 30 40 50 60 70 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 3000 2500 SWITCHING ENERGY (J) V I DD 20 30 2000 V = 400V = 400V R = 5 D J = 43A 1600 Eon and Eoff (J) T = 125C J T = 125C L = 100H EON includes diode reverse recovery L = 100H EON includes diode reverse recovery Eoff 2000 1500 1000 500 0 1200 800 Eon 400 Eoff Eon 050-7053 Rev C 9-2004 0 10 40 50 60 70 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT 20 30 10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE 0 5 APT6013B2LL_LLL 90% 10% Gate Voltage TJ125C 90% Drain Current 90% Gate Voltage td(off) Drain Voltage T 125C J td(on) tr 5% 10% Switching Energy 5% Drain Voltage tf 10% 0 Switching Energy Drain Current Figure 18, Turn-on Switching Waveforms and Definitions Figure 19, Turn-off Switching Waveforms and Definitions APT30DF60 V DD ID V DS G D.U.T. Figure 20, Inductive Switching Test Circuit T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244) Drain 20.80 (.819) 21.46 (.845) Drain 25.48 (1.003) 26.49 (1.043) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842) 2.29 (.090) 2.69 (.106) 1.01 (.040) 1.40 (.055) 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 050-7053 Rev C 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 9-2004 19.81 (.780) 20.32 (.800) Gate Drain Source Gate Drain Source |
Price & Availability of APT6013B2LL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |