![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BXY44 HiRel Silicon PIN Diode * * * * * T HiRel Discrete and Microwave Semiconductor Current controlled RF resistor for RF attenuators and switches High reverse voltage Hermetically sealed microwave package Space Qualified ESA/SCC Detail Spec. No.: 5513/030 Type Variant No.s 04 to 07 T2 FP T1 ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BXY44-T (ql) BXY44-T1 (ql) BXY44-T2 (ql) BXY44-FP (ql) Marking Ordering Code see below Pin Configuration Package T T1 T2 FP 1 1 1 1 1' 2 2 2 2 (ql) Quality Level: P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality, (see order instructions for ordering example) Ordering Code: Ordering Code: Ordering Code: Ordering Code: Q62702X148 on request on request Q62702X162 Semiconductor Group 1 of 6 Draft B, September 99 BXY44 Maximum Ratings Parameter Reverse Voltage Forward Current Power Dissipation 1) Symbol VR IF Ptot Top Tstg Tsol Tj Rth(j-c) Values 200 400 500 -55 to +150 -65 to +175 +235 150 110 140 110 110 Unit V mA mW C C C C K/W Operating Temperature Range Storage Temperature Range Soldering Temperature 2) Junction Temperature Thermal Resistance Junction-Case BXY44-T BXY44-T1 BXY44-T2 BXY44-FP Notes.: 1.) For BXY44-T; -T2, -FP: At TCASE = 95 C. For TCASE > 95 C derating is required. For BXY44-T1: At TCASE = 80 C. For TCASE > 80 C derating is required. 2.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have elapsed. Electrical Characteristics at TA=25C; unless otherwise specified Parameter DC Characteristics Reverse Current 1 VR1=200V Reverse Current 2 VR2=100V Forward Voltage IF=100mA VF 1,0 1,05 V IR2 5 nA IR1 100 nA Symbol min. Values typ. max. Unit Semiconductor Group 2 of 6 Draft B, September 99 BXY44 Electrical Characteristics (continued) Parameter AC Characteristics Total Capacitance VR=50V; f=1MHz BXY44-T, -T1, -T2 BXY44-FP Forward Resistance 1 f=100MHz, IF1=10A BXY44-T, -T1, -T2 BXY44-FP Forward Resistance 2 f=100MHz, IF2=1mA BXY44-T, -T1, -T2 BXY44-FP Forward Resistance 3 f=100MHz, IF3=10mA BXY44-T, -T1, -T2 BXY44-FP Minority Carrier Lifetime IF=10mA, IR=6mA, IR=3mA L 2,0 2,0 300 3,0 3,8 800 5,0 5,0 ns RF3 12 11 16 20 28 27 RF2 800 700 900 900 1300 1200 RF1 0,20 0,50 0,35 0,75 CT pF Symbol min. Values typ. max. Unit Semiconductor Group 3 of 6 Draft B, September 99 BXY44 Order Instructions: Full type variant including package variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... BXY44- (x) (ql) (x): Package Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702X162 BXY44-T1 ES For BXY44 in T1 Package; ESA Space Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: e-mail: Address: ++89 234 24480 ++89 234 28438 martin.wimmers@infineon.com Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich Semiconductor Group 4 of 6 Draft B, September 99 BXY44 T Package X1 C Y1 Y2 B A Symbol A B C 1 2 Millimetre min max 1,30 1,45 1,15 1,35 0,40 T1 Package X1 B Y1 Y2 C 2 A Symbol A B C D E F G H 1 D F E G G H Millimetre min max 1,30 1,45 1,15 1,35 0,40 0,10 0,50 0,30 0,06 0,10 5,50 0,40 0,60 T2 Package X1 Y2 Y1 B A 1 2 Symbol A B C D C D Millimetre min max 1,30 1,45 2,0 2,2 0,60 1,25 0,08 0,20 Semiconductor Group 5 of 6 Draft B, September 99 BXY44 FP Package Y1 L X1 d D1 Y2 2 D B B1 L Symbol B B1 D D1 d d1 F L 1 d1 1' F Millimetre min max 3,10 3,55 3,00 3,30 1,30 1,70 0,55 0,65 0,10 0,15 0,25 0,40 2,40 2,60 5,50 - n.c. n.c. Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 6 of 6 Draft B, September 99 |
Price & Availability of BXY44
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |