 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05238 EM6D-100L EMI FILTER/TVS ARRAY APPLICATIONS Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns DFN-12 FEATURES ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters Blocking Rectifier > 25db Attenuation from 800MHz to 3GHz Protects up to Six(6) Data Lines RoHS Compliant MECHANICAL CHARACTERISTICS DFN-12 Package Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory For Leaded Device Availability Flammability Rating UL 94V-0 Device Marking: Marking Code 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION For Each Line I/On 100 Ohm I/On 1 2 3 4 5 6 GND 10pF GND 10pF 12 11 10 Note: I/O connected from pins 1-12, 2-11, 3-10, 4-9, 5-8 and 6-7. 9 8 7 BOTTOM VIEW 05238.R6 2/07 1 www.protekdevices.com EM6D-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 20% Soldering Temperature for 10 seconds SYMBOL TA TSTG P R TL VALUE -40 to 85 -55 to 150 400 100 265 UNITS C C mW OHMS C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT @3V ID A 0.1 @ 25C Unless Otherwise Specified MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS TYPICAL CAPACITANCE (See Note 1) TYPICAL FORWARD VOLTAGE VWM VOLTS EM6D-100L M6D10L 5.0 @ 1mA V(BR) VOLTS 6.0 @10mA VF VOLTS 0.8 @ 800-3000 MHz dB 25 fC MHz 150 @2.5V, 1MHz C pF 20 Note 1: 32pF @ 0V, 1MHz, 20% tolerance. FIGURE 1 INSERTION LOSS 0 -5 -10 Gain (dB) -15 -20 -25 -30 -35 0.1 1 10 100 2.5 Volts 0 Volts 1000 10000 Frequency (MHz) 05238.R6 2/07 2 www.protekdevices.com EM6D-100L GRAPHS 1.100 FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C) Normalized Resistance 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature C 60 80 100 1.6 Cj - Capacitance (Normalized) FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05238.R6 2/07 3 www.protekdevices.com EM6D-100L DFN-12 PACKAGE OUTLINE & DIMENSIONS D PACKAGE OUTLINE PACKAGE DIMENSIONS MILLIMETERS DIM A A1 A3 b D E E2 E3 E4 e L MIN 0.70 0.00 0.127 0.20 2.90 1.25 0.30 1.78 1.90 0.46 0.23 MAX 0.84 0.05 0.228 0.30 3.10 1.45 0.40 2.24 2.34 0.56 0.30 INCHES MIN 0.028 0.00 0.005 0.008 0.114 0.049 0.012 0.070 0.075 0.018 0.009 MAX 0.033 0.002 0.009 0.012 0.122 0.057 0.016 0.088 0.092 0.022 0.012 E Pin 1 Reference TOP VIEW A3 A SIDE VIEW A3 A1 MOUNTING PAD LAYOUT 3.10mm 0.122 0.50mm BSC 0.020 BSC NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 8mm tape, i.e., EM6D-100L-T71. 3. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM6D-100L-T73. 4. Suffix- LF = Lead-Free, Pure Tin Plating, i.e., EM6D-100L-LF-T73. L 1 e 6 E3 E4 12 b BOTTOM VIEW 7 E2 0.27mm 0.011 0.40mm 0.016 1.63mm 0.064 0.48mm 0.019 Outline & Dimensions: Rev 3 - 10/06, 06058 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7")/330mm(13") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 1.60 0.10 3.25 0.10 0.95 0.10 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05238.R6 2/07 4 www.protekdevices.com |
Price & Availability of EM6D-100L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |