![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HDSP-S5xE/S5xG/B5xZ Series 91.44 mm (3.6 inch) General Purpose 5 x 7 Dot Matrix Alphanumeric Displays Data Sheet Description These displays have a 91.44 mm (3.6 inch) character height. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint and are available in a choice of GaP Red or GaP Green colors. The Bi-color display consists of GaP Red and GaP Green colors. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/cosmetic defects. Applications * Suitable for indoor use * Not recommended for industrial applications, i.e. operating temperature requirements exceeding 85C or below -35C * Extreme temperature cycling not recommended[1] Features * 5 x 7 Dot matrix font * Stackable horizontally * Pin-out - 76.2 mm (3.0 in.) Dual-In-Line (DIP) leads on 5.08 mm (0.2 in.) centers * Choice of colors - Single color: red or green - Bi-color: red and green * Face paint color: black * Design flexibility - Common row anode or Common row cathode * Categorized: - Single color: luminous intensity - Bi-Color: luminance * Green categorized for color Devices GaP Red GaP Green HDSPHDSPS53E S53G S58E S58G B53Z B58Z Description 91.44 mm Black Surface Common Row Anode 91.44 mm Black Surface Common Row Cathode 91.44 mm Black Surface Bi-Color Common Row Anode 91.44 mm Black Surface Bi-Color Common Row Cathode Note: 1. For details, please contact your local Avago components sales office or an authorized distributor. Package Dimensions Single Color 76.00 (2.992) 60.96 (2.400) COL 1 ROW 1 2 3 4 5 2 3 106.55 (4.195) 91.44 (3.600) 76.20 (3.000) 4 5 6 7 PIN 1 PART NO. 13.00 (0.512) 10.16 (0.40) 4.80 0.50 (0.189) 5.08 (0.200) 0.80 (0.031) 76.20 (3.000) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE 0.25 mm. 2 Internal Circuit Diagram Common Row Anode - Single Color COLUMN PIN 1 13 2 3 4 3 11 4 10 5 6 ROW 1 9 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CONNECTION ANODE ROW 5 ANODE ROW 7 CATHODE COLUMN 2 CATHODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 5 ANODE ROW 6 ANODE ROW 3 ANODE ROW 1 CATHODE COLUMN 4 CATHODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 1 ANODE ROW 2 2 14 3 8 4 5 12 5 1 6 7 7 2 3 Internal Circuit Diagram Common Row Cathode - Single Color COLUMN PIN 1 13 2 3 4 3 11 4 10 5 6 ROW 1 9 PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CONNECTION CATHODE ROW 5 CATHODE ROW 7 ANODE COLUMN 2 ANODE COLUMN 3 CATHODE ROW 4 ANODE COLUMN 5 CATHODE ROW 6 CATHODE ROW 3 CATHODE ROW 1 ANODE COLUMN 4 ANODE COLUMN 3 CATHODE ROW 4 ANODE COLUMN 1 CATHODE ROW 2 2 14 3 8 4 5 12 5 1 6 7 7 2 4 Package Dimensions Bi-Color 76.00 (2.992) 60.96 (2.400) COL 1 ROW 1 2 3 4 5 2 3 106.55 (4.195) 91.44 (3.600) 76.20 (3.000) 4 5 6 7 10.16 (0.40) PART NO. 13.00 (0.512) 4.80 (0.189) 5.08 (0.200) 0.80 (0.031) 76.20 (3.000) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE 0.25 mm. 5 Internal Circuit Diagram Common Row Anode - Bi-Color 3 COLUMN PIN 1 1 2 5 2 6 21 7 22 8 19 4 20 15 5 16 ROW 17 18 PIN NO. 1 2 3 4 5 6 7, 21 8, 22 9 10 11, 25 12, 26 13 14 15 16 17 18 19 20 23 24 27 28 CONNECTION COLUMN 1 GREEN COLUMN 1 HER ROW 7 GREEN ROW 7 HER COLUMN 2 GREEN COLUMN 2 HER COLUMN 3 GREEN COLUMN 3 HER ROW 5 GREEN ROW 5 HER ROW 4 GREEN ROW 4 HER ROW 6 GREEN COLUMN 6 HER COLUMN 5 GREEN COLUMN 5 HER ROW 1 GREEN ROW 1 HER COLUMN 4 GREEN COLUMN 4 HER ROW 3 GREEN ROW 3 HER ROW 2 GREEN ROW 2 HER 1 2 27 28 3 23 24 4 25 11 26 12 5 9 10 6 13 14 7 3 4 THE SIGN THE SIGN REPRESENTS HER COLOR DICE REPRESENTS GREEN COLOR DICE 6 Internal Circuit Diagram Common Row Cathode - Bi-Color 3 COLUMN PIN 1 1 2 5 2 6 21 7 22 8 19 4 20 15 5 16 ROW 17 18 PIN NO. 1 2 3 4 5 6 7, 21 8, 22 9 10 11, 25 12, 26 13 14 15 16 17 18 19 20 23 24 27 28 CONNECTION COLUMN 1 GREEN COLUMN 1 HER ROW 7 GREEN ROW 7 HER COLUMN 2 GREEN COLUMN 2 HER COLUMN 3 GREEN COLUMN 3 HER ROW 5 GREEN ROW 5 HER ROW 4 GREEN ROW 4 HER ROW 6 GREEN COLUMN 6 HER COLUMN 5 GREEN COLUMN 5 HER ROW 1 GREEN ROW 1 HER COLUMN 4 GREEN COLUMN 4 HER ROW 3 GREEN ROW 3 HER ROW 2 GREEN ROW 2 HER 1 2 27 28 3 23 24 4 25 11 26 12 5 9 10 6 13 14 7 3 4 THE SIGN THE SIGN REPRESENTS HER COLOR DICE REPRESENTS GREEN COLOR DICE 7 Absolute Maximum Ratings at TA = 25C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 KHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Temperature for 3 seconds[4] (2 mm [0.078 in.] below Body) GaP Red HDSP-S53E/S58E/B53Z/B58Z 130 80 25[1,2] 3 -35 to +85 -35 to +85 250 GaP Green HDSP-S53G/S58G/B53Z/B58Z 130 100 25[1,3] 3 -35 to +85 -35 to +85 250 Units mW mA mA V C C C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25C at 0.20 mA/C. 3. Derate above 25C at 0.33 mA/C. 4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. 8 Optical/Electrical Characteristics at TA = 25C GaP Red Devices HDSPParameter Luminous Intensity/Unit (Digit Average)[1] S53E S58E B53Z B58Z Peak Wavelength Dominant Wavelength[2] Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv peak d VF VR I v-m Min. 2.2 Typ. 4.0 632 622 4.1 3.0 2:1 Max. 7.47 Units mcd nm nm V V Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 A IFP = 40 mA, 1/8 Duty Factor 5.2 GaP Green Devices HDSPParameter Luminous Intensity/Unit (Digit Average)[1] Peak Wavelength S53G Dominant Wavelength[2] S58G B53Z Forward Voltage B58Z Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv peak d VF VR Iv-m Min. 3.31 Typ. 6.23 568 573 4.5 3.0 2:1 Max. 11.22 Units mcd nm nm V V Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 A IFP = 40 mA, 1/8 Duty Factor 5.2 Bi-Color Devices HDSPParameter Luminance/Unit B53Z (Digit Average)[1] B58Z Symbol Iv Min. 72.0 Typ. 130 Max. 258.0 Units Cd/m2 Test Conditions IFP = 40 mA, 1/8 Duty Factor Notes: 1. The digits are categorized for luminous intensity or luminance. The intensity or luminance category is designated by a letter on the side of the package. 2. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 9 Intensity Bin Limits[1] (mcd at IFP = 40 mA, 1/8 Duty Factor) GaP Red Bin Name G H I Min.[2] 2.2 3.31 4.98 Max.[2] 3.3 4.97 7.47 GaP Green Bin Name H I J Min.[2] 3.31 4.98 7.48 Max.[2] 4.97 7.47 11.22 Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor) Bin Name E F G H I J K Min.[2] 72 86 104.1 124.1 149.1 179.1 215.1 Max.[2] 86 104 124 149 179 215 258 Hue Grade Coordinate X Y 4 0.542-0.553 0.445-0.456 5 0.552-0.563 0.435-0.446 6 0.562-0.573 0.425-0.436 Bin 7 0.572-0.583 0.415-0.426 8 0.582-0.593 0.405-0.416 9 0.592-0.603 0.395-0.406 10 0.602-0.613 0.385-0.396 Notes: 1. Hue categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is 10%. Color Bin Limits (nm)[1] GaP Green Bin Name 3 4 5 Min.[2] 569.1 571.1 573.1 Max.[2] 571 573 575 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each color bin limit is 1.0 nm. 10 IDC - MAXIMUM DC CURRENT - mA 30 25 20 15 GaP GREEN GaP RED 45 IF - FORWARD CURRENT - mA 40 35 30 25 GaP RED 20 15 GaP 10 5 0 0 1 2 3 4 5 6 10 5 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C VF - FORWARD VOLTAGE - V Figure 1. Maximum allowable average current per dot vs. ambient temperature. Figure 2. Forward current vs. forward voltage. RELATIVE LUMINANCE (NORMALIZED TO 1 AT 40 mA PEAK) 1.4 1.2 RELATIVE EFFICIENCY 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 60 70 80 90 100 1.0 GaP RED 0.8 GaP GREEN 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 IPEAK - PEAK DOT CURRENT - mA IPEAK - PEAK FORWARD CURRENT - mA Figure 3. Relative efficiency (luminous intensity per dot) vs. peak current per dot. Figure 4. Relative luminance vs. peak forward current. 11 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 91.44 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Limited. All rights reserved. 5988-1731EN May 18, 2006 |
Price & Availability of HDSP-B58Z
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |