View MC34074_1152822.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UTC MC34074 LINEAR INTEGRATED CIRCUIT
HIGH SLEW RATE, WIDE BANDWIDTH, SINGLE SUPPLY OPERATIONAL AMPLIFIER
DESCRIPTION
The UTC MC34074 offer 4.5MHz of gain bandwidth product, 13V/s slew rate and fast setting time without the use of JFET device technology. Although it can be operated from split supplies, it is particularly suited for single supply operation, since the common mode input voltage range includes ground potential (VEE). With A Darlington input stage, it exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no deadband crossover distortion and large output voltage swing, provides high capacitance drive capability, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response.
SOP-14
DIP-14
FEATURES
*Wide bandwidth: 4.5 MHz *High slew rate: 13V/s *Fast settling time:1.1s to 0.1% *Wide single supply operation: 3.0V to 44V *Wide input common mode voltage range: Includes Ground (VEE) *Low input offset voltage: 3.0mV maximum *Large output voltage swing: -14.7V to +14V (with +-15V supplies) *Large Capacitance Drive Capability: 0pF to 10,000 pF *Low total harmonic distortion: 0.02% *Excellent phase margin: 60 *Excellent gain margin: 12dB *Output short circuit protection *ESD Diodes/Clamps provide input protection
PIN CONFIGURATIONS
Figure 1.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25C)
PARAMETER SYMBOL VALUE UNIT
Supply Voltage (from VEE to VCC) Vs +44 V Differential Input Voltage VIDR Note 1 V Input Voltage VIR Note 1 V Output Short Circuit Duration (Note 2) tSC Indefinite sec Operating Junction Temperature Tj +150 C Storage Temperature Range Tstg -60 to +150 C Notes: 1.Either or both input voltages should not exceed the magnitude of VCC or VEE. 2.Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded. (see Figure 2)
UTC
UNISONIC TECHNOLOGIES CO., LTD.
2
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS (VCC=+15V, VEE=-15V, RL=connected to ground, unless otherwise
noted)
PARAMETER
Input Offset Voltage
SYMBOL
VIO
TEST CONDITIONS
VCC=+15V,VEE=-15V ,TA=+25C VCC=+5V,VEE=0V, TA=+25C VCC=+15V,VEE=-15V ,TA=0C to 70C RS=10,VCM=0V,VO=0V, TA=0C to 70C VCM=0V, Vo=0V, TA=+25C TA=0C to 70C VCM=0V, Vo=0V, TA=+25C TA=0C to 70C TA=+25C TA=0C to 70C Vo=10V, RL=2.0k, TA=+25C TA=0C to 70C VCC=+5.0V,VEE=0V,RL=2.0k, TA=+25C VCC=+15.0V,VEE=-15V, RL=10k, TA=+25C VCC=+15.0V,VEE=-15V, RL=2.0k, TA=0C to 70C VCC=+5.0V,VEE=0V,RL=2.0k, TA=+25C VCC=+15.0V,VEE=-15V, RL=10k,TA=+25C VCC=+15.0V,VEE=-15V, RL=2.0k, TA=0C to 70C VID=1.0V,VO=0V, TA=25C Source Sink RS<=10k,VCM=VICR,TA=25C VCC/VEE=+16.5V/-16.5V to +13.5/-13.5V, TA=25C VCC=+5.0V,VEE=0V,VO=+2.5V, TA=+25C VCC=+15.0V,VEE=-15V, VO=0V,TA=+25C VCC=+15.0V,VEE=-15V, VO=0V, TA=0C to 70C Vin=-10V to +10V, Av=+1.0 RL=2.0k, CL=500pF Av=-1.0 10 Setp, Av=-1.0 to 0.1% (+1/2 LSB of 9-Bits) to 0.01% (+1/2 LSB of 12-Bits) f=100kHz Av=+1.0, RL=2k, Vo=20Vpp, THD=5.0% RS=100, VCM=0V, Vo=0V
MIN
TYP
0.5 0.5
MAX
3.0 3.0 5.0
UNIT
mV mV mV V/C nA
Average Temperature Coefficient of Input Offset Voltage Input Bias Current
VIO/T IIB IIO VICR AVOL
10
100
500 700 nA
Input Offset Current
Input Common Mode Voltage Large Signal Voltage Gain
50 300 VEE to (VCC -1.8) VEE to (VCC -2.2) 50 25 3.7 13.6 13.4 0.1 -14.7 0.3 -14.3 -13.5 100 4.0 14
6.0
V V V/mV
Output Voltage Swing (VID=+-1.0V)
V V V V V V
VOH
Output Voltage Swing (VID=+-1.0V)
VOL
Output Short Circuit current
ISC CMR PSR ID
Common Mode Rejection Power Supply Rejection (RS=100) Power Supply Current (Per Amplifier, No Load)
10 20 80 80
30 30 97 97 1.6 1.9 2.0 2.5 2.8
mA dB dB mA mA mA V/s s MHz kHz
Slew Rate Setting Time Gain Bandwidth Product Power Bandwidth
SR ts GBW BW
8.0
10 13 1.1 2.2 4.5 160
3.5
UTC
UNISONIC TECHNOLOGIES CO., LTD.
3
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
PARAMETER
Phase Margin Gain Margin Equivalent Input Noise Voltage Equivalent Input Noise Current Differential Input Resistance Differential Input Capacitance Total Harmonic distortion Channel Separation Open Loop Output Impedance
SYMBOL
fm Am en in Rin Cin THD
TEST CONDITIONS
RL=2k RL=2k, CL=300pF RL=2k RL=2k, CL=300pF Rs=100, f=1.0kHz f=1.0kHz VCM=0V VCM=0V Av=+10, RL=2.0kHz, 2.0VppVo20Vpp, f=10kHz f=10kHz f=1.0MHz
MIN
TYP
60 40 12 4 32 0.22 150 2.5 0.02 120 30
MAX
UNIT
Deg dB
nV/Hz pA/Hz M pF % dB W
IZoI
UTC
UNISONIC TECHNOLOGIES CO., LTD.
4
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC
UNISONIC TECHNOLOGIES CO., LTD.
5
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC
UNISONIC TECHNOLOGIES CO., LTD.
6
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC
UNISONIC TECHNOLOGIES CO., LTD.
7
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC
UNISONIC TECHNOLOGIES CO., LTD.
8
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC
UNISONIC TECHNOLOGIES CO., LTD.
9
QW-R105-018,A
UTC MC34074 LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
10
QW-R105-018,A

▲Up To Search▲

Price & Availability of MC34074

	To Download MC34074 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .