 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO., LTD. 27-21SYGC/S530-E1/TR8 PART NO.: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 1/8 Features ! Package Dimensions Package in 8mm tape on 7diameter reel. ! Compatible with automatic placement equipment. ! Compatible with infrared and vapor phase reflow solder process. ! Mono-color type. Descriptions ! The 27-21 SMD Taping is much smaller than leaded components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications, etc. ! Applications ! ! ! ! Notes Tolerances Unless Dimension 0.1mm Angle 0.5 Unit = mm Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. PART NO 27-21 SYGC/S530-E1/TR8 Chip Material Emitted Color AlGaInP Super Yellow Green Lens Color Water Clear OFFICE: NO. 25, Lane 76, Sec.3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C. TEL.: 886-2-2267-2000, 2267-9936 FAX: 886-2-2267-6244, 2267-6189, 2267-6306 http: //www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PART NO.: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 2/8 Package Dimensions Loaded quantity per reel 3000 PCS/reel EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PART NO.: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 3/8 Absolute Maximum Ratings at Ta = 25 Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF Topr Tstg Tsol ESD Pd Rating Unit V mA V mW 5 25 -40 ~ +85 -40 ~ +90 260 (for 5 second) 2000 60 160 Electrostatic Discharge Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) IF(Peak) mA Electronic Optical Characteristics : Parameter Luminous Intensity Symbol IV Min. Typ. Max. Unit mcd mcd deg nm nm nm V A Condition IF=2mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA ----10 ------------------------- 1 15 130 575 573 20 2.0 ----- ------------------------2.4 10 Viewing Angle Peak Wavelength Dominant Wavelength 21/2 p d VF IR Spectrum Radiation Bandwidth Forward Voltage Reverse Current VR=5V EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PART NO.: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 4/8 Reliability Test Items And Conditions NO Item Solder Heat Temperature Cycle Test Conditions TEMP. : 260 5 Test Hours/Cycle Sample Size 76 PCS Ac/Re 0/1 0/1 1 2 5 SEC. H : +85 30min. 5 min. L : -55 30min. H : +100 5min. 50 CYCLES 76 PCS 3 Thermal Shock 10 sec. L : -10 5min. 50 CYCLES 76 PCS 0/1 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity TEMP. : 100 TEMP. : -55 IF= 20 mA 85/RH85% 1000 HR. 1000 HR. 1000 HR. 1000 HR. 76 PCS 76 PCS 76 PCS 76 PCS 0/1 0/1 0/1 0/1 EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PART NO.: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 5/8 Typical Electro-Optical Characteristic Curves EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PRAT NO: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 6/8 Test Circuit R LED Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of temperature and RH are : 5~35, RH60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with desiccanting agent. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 If opened more than one week in an atmosphere 5~35, RH60%, they should be treated at 60 5for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (normal = blue) , you should treat them in the same conditions as 2.3. EVERLIGHT ELECTRONICS CO.,LTD. 27-21 SYGC/S530-E1/TR8 PRAT NO: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV. 1.0 ECN Page: 7/8 Soldering heat reliability ( DIP ) Please refer to the following figure : Soldering Iron Basic spec is 5 sec. when 260.If temperature is higher, time should be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable.Surface temperature of the device should be under 230 . Rework 1. Customer must finish rework within 5 sec. under 260. 2. Copper foil can not be touched by the head of iron. 3. Twin-head type is preferred. x EVERLIGHT ELECTRONICS CO., LTD. 27-21 SYGC/S530-E1/TR8 PRAT NO: Chip LEDs with Right Angle Lens Device Number DSE-271-004 REV: 1.0 ECN Page: 8/8 Reflow Temp./Time : |
Price & Availability of 27-21SYGC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |