|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DISCRETE SEMICONDUCTORS DATA SHEET BF997 N-channel dual-gate MOS-FET Product specification File under Discrete Semiconductors, SC07 April 1991 Philips Semiconductors Product specification N-channel dual-gate MOS-FET FEATURES * Protected against excessive input voltage surges by integrated back-to-back diodes between gates and source * Integrated drain resistance to suppress oscillation in the frequency range greater than 1 GHz. APPLICATIONS * UHF and VHF applications such as: - UHF/VHF television tuners - Professional communication equipment * Especially intended for use in pre-amplifiers in CATV tuners with a large tuning range up to 500 MHz. 1 2 BF997 DESCRIPTION Depletion type field-effect transistor in a plastic SOT143 microminiature package with interconnected source and substrate. handbook, halfpage 4 3 g 2 g1 d PINNING Top view MAM039 s,b PIN 1 2 3 4 SYMBOL s, b d g2 g1 source drain gate 2 gate 1 DESCRIPTION Marking code: MKp. Fig.1 Simplified outline (SOT143) and symbol. QUICK REFERENCE DATA SYMBOL VDS ID Ptot Tj Y fs Cig1-s Crs F PARAMETER drain-source voltage drain current total power dissipation junction temperature transfer admittance feedback capacitance noise figure f = 1 kHz; ID = 10 mA; VDS = 15 V; VG2-S = 4 V up to Tamb = 60 C CONDITIONS - - - - 18 TYP. MAX. 20 30 200 150 - - - - UNIT V mA mW C mS pF fF dB input capacitance at gate 1 f = 1 MHz; ID = 10 mA; VDS = 15 V; VG2-S = 4 V 2.5 f = 1 MHz; ID = 10 mA; VDS = 15 V; VG2-S = 4 V 25 f = 200 MHz; GS = 2 mS; BS = BSopt; ID = 10 mA; VDS = 15 V; VG2-S = 4 V 1 April 1991 2 Philips Semiconductors Product specification N-channel dual-gate MOS-FET LIMITING VALUES In according with the Absolute Maximum Rating System (IEC 134). SYMBOL VDS ID ID(AV) IG1-S IG2-S Ptot Tstg Tj PARAMETER drain-source voltage drain current (DC) average drain current gate 1-source current gate 2-source current total power dissipation storage temperature junction temperature up to Tamb = 60 C; note 1 CONDITIONS - - - - - - -65 - MIN. MAX. 20 30 30 10 10 200 +150 150 BF997 UNIT V mA mA mA mA mW C C THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER thermal resistance from junction to ambient CONDITIONS in free air; note 1 VALUE 460 UNIT K/W Note to the Limiting values and the Thermal characteristics 1. Device mounted on a ceramic substrate of 8 x 10 x 0.7 mm. handbook, halfpage 200 MGE792 Ptot (mW) 100 0 0 100 Tamb (C) 200 Fig.2 Power derating curve. April 1991 3 Philips Semiconductors Product specification N-channel dual-gate MOS-FET STATIC CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL IG1-SS IG2-SS PARAMETER gate 1 cut-off current gate 2 cut-off current CONDITIONS VG1-S = 5 V; VG2-S = VDS = 0 VG2-S = 5 V; VG1-S = VDS = 0 IG1-SS = 10 mA; VG2-S = VDS = 0 IG2-SS = 10 mA; VG1-S = VDS = 0 ID = 20 A; VDS = 15 V; VG2-S = 4 V ID = 20 A; VDS = 15 V; VG1-S = 0 VDS = 15 V; VG2-S = 4 V; VG1-S = 0 - - 6 6 - - 2 MIN. BF997 MAX. 50 50 20 20 -2.5 -2 20 UNIT nA nA V V V V mA V(BR)G1-SS gate 1-source breakdown voltage V(BR)G2-SS gate 2-source breakdown voltage V(P)G1-S V(P)G2-S IDSS gate 1-source cut-off voltage gate 2-source cut-off voltage drain-source cut-off voltage DYNAMIC CHARACTERISTICS Measuring conditions (common source): ID = 10 mA; VDS = 15 V; VG2-S = 4 V; Tamb = 25 C. SYMBOL Y fs Cig1-s Cig2-s Crs Cos F Gp PARAMETER transfer admittance input capacitance at gate 1 input capacitance at gate 2 feedback capacitance output capacitance noise figure power gain f = 1 kHz f = 1 MHz f = 1 MHz f = 1 MHz f = 1 MHz f = 200 MHz; GS = 2 mS; BS = BSopt f = 200 MHz; GS = 2 mS; BS = BSopt; GL = 0.5 mS; BL = BLopt CONDITIONS - - - - - - MIN. 15 TYP. 18 2.5 1.2 25 1 1 25 UNIT mS pF pF fF pF dB dB April 1991 4 Philips Semiconductors Product specification N-channel dual-gate MOS-FET PACKAGE OUTLINE BF997 handbook, full pagewidth 0.75 0.60 0.150 0.090 4 0.1 max 10 max o 3.0 2.8 1.9 3 B A 0.2 M A B 10 max o 1.4 1.2 2.5 max 1 1.1 max o 2 0.1 M A B 30 max 0.88 0 0.1 1.7 0.48 0 0.1 MBC845 TOP VIEW Dimensions in mm. See also Soldering recommendations. Fig.3 SOT143. DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. April 1991 5 |
Price & Availability of BF997 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |