 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DN6853 Hall IC (Operating Supply Voltage Range VCC=3.6 to 16V, Operating in Alternative Magnetic Field) s Overview The DN6853 is an integrated circuit making use of Hall effects. It is designed particularly for operating at a low supply voltage with the alternating field. It is suitable for various sensors and contactless switches. 2.00.3 4.50.3 4.00.3 1.0 0.7 Unit : mm 5 s Features * Wide range of supply voltage : 3.6 to 16V * Operating in alternative magnetic field. * TTL and MOS ICs directly drivable by output * Semipermanent service life because of no contact parts * Drivable with a small magnet * 3-pin SIL plastic package (3-SIP) * Open collector 10.50.5 0.80.1 0.50.1 1.27 5 123 5 0.43 - 0.05 + 0.1 s Applications * Speed sensors * Position sensors * Rotation sensors * Keyboard switches * Microswitches Note) This IC is not suitable for car electrical equipments. 2 2 SSIP003-P-0000A (E-3S) 1 : VCC 2 : GND 3 : Output s Block Diagram Stabilized power supply 1 VCC 3 Output 2 Hall element Amp. Schmitt trigger Output stage GND s Absolute Maximum Ratings (Ta=25C) Parameter Supply voltage Supply current Circuit current Power dissipation Operating ambient temperature Storage temperature Symbol VCC ICC IO PD Topr Tstg Rating 18 8 20 100 -40 to + 85 -55 to + 125 Unit V mA mA mW C C s Electrical Characteristics (Ta=25C) Parameter Operating flux density Symbol B1 (L to H) B2 (H to L) Low output voltage VOL VCC=12V VCC=12V VCC=16V, IO=12mA, B=30mT VCC=3.6V, IO=12mA, B=30mT VCC=16V, VO=18V, B=-30mT VCC=3.6V, VO=18V, B= -30mT VCC=16V VCC=3.6V Condition min -30 30 0.4 0.4 10 10 6 5.5 typ max Unit mT mT V V A A mA mA High output current IOH Supply current ICC Note 1) Operating supply voltage range VCC (opr)= 3.6 to 16V Note 2) For the operating flux density, 200 mT is also available as Rank A. s Hall Element Position 1.75 1.3 1.0 Unit : mm The center of the Hall element is in the hatched area in the left figure. s Flux-Voltage Conversion Characteristics S Output voltage (VO) Marking surface 1 2 1.0 3 N Applied flux direction 1 : VCC 2 : GND 3 : Output B1 B2 Flux density (B) s Precaution on Use 1. Change of the operation magnetic flux density dose not depend on the supply voltage, because the stabilization power supply is built-in. (only for the range; VCC= 4.5 to 16V) 2. Change from "H" to "L" level increases the supply current by approx. 1mA. |
Price & Availability of DN6853
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |