![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IA6008-CA11A Contact image sensor heads Color image sensor heads for multi-function IA6008-CA11A The new compact full color contact image sensor heads are world's smallest in its class and designed to minimize the size and weight of the scanner. The sensor chip used for the CIS is produced with the proprietary technologies of ROHM LSI circuit design and accumulated manufacturing technology of monochrome devices. This product has an excellent color reproduction capability with the high level of noise immunity with the ultra small package. It operates on 3.3 volts power supply. Applications Image sensor heads device for multiple function facsimiles such as color scanner and multiple function printer. Features 1) Signal amplifier is built in to the image sensor IC in order to increase immunity to external noise. 2) Additionally, newly developed analog memory circuit and realizes high speed scanning. 3) The LED light source is mounted on the same substrate as the sensor chip which makes it possible to package the device with lighter weight and an extremely small size. 4) With the proprietary prism, the output signal is maintained uniformly. 5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability. External dimensions (Unit : mm) Paper feeding direction 2360.2 (1.8) 210(Effective Reading Width) 50.20 C L Effective 1st bit 12.80.5 1mm pitch 12pin 10.60.3 A ROHM Max. 1.5 (15.5) (25) 2-R1.5 Effective Depth 2 5.30.2 No.12 14.90.2 No.1 Note) Deflection at the top of A faces : 0 to 0.25 Pin No. No.1 No.2 No.3 No.4 No.5 No.6 Signal Ao GND GND VDD VREF SP Pin No. No.7 No.8 No.9 No.10 No.11 No.12 Signal CLK V-LED B-GND G-GND R-GND N.C. 13.4 + 0.5 - 181.15 28.85 + 0.05 - 0.25 19.050.2 1/4 IA6008-CA11A Contact image sensor heads Characteristics Parameter Effective scanning width Primary scan dot density Total dot number Power supply voltage Reference voltage Scanning speed Clock frequency Maximum dynamic range Minimum dynamic range Dark output Operating temperature Symbol - - - VDD VREF SLT CLK VRMax VRMim. Vod - 600 5148 3.3 0.8 5.1 3.3 0.75 0.375 Vref + 0.1 - 5 to 45 Typ. Unit mm dpi dots V V ms / line MHz V V V C Pin assignments No. 1 2 3 4 5 6 7 8 9 10 11 12 Circuit AO GND GND VDD VREF SP CLK V-LED B-GND G-GND R-GND NC I/O O I I I I I I I I I I - Function Analog output Ground Ground Power supply Reference voltage Start pulse Clock LED power supply BLUE LED ground GREEN LED ground RED LED ground - 2/4 IA6008-CA11A Contact image sensor heads Timing chart (a) CLK Timing Chart 1/fCLK twH twL 50% 50% CLK 50% 50% SP tSETUP tHOLD ts Ao 1pixel 2pixel (b) Data Output Timing Chart After turning on the SP pulse, the analog output starts from the setting up point of 64 clock pulse. 0 1 51 52 53 63 64 65 CLK SP Ao Vref output period(51pixels) 1 Vdummy 52 to 63pixels Analog output period 64 to 5211pixels 1 to 51pixels Note)The CLK section area which is over the effective pixel numbers (Output blank part) cannot be used as the analog Output standard level. 1 VREF output period is defined by the peripheral circuit in the next page. 3/4 IA6008-CA11A Contact image sensor heads Circuit diagram VDD 1Fx12 1 5148 GND SP ANALOG MEMORY CIRCUIT CLK VDD VREF AO VREF 1Fx2 VLED RGND GGND BGND Peripheral circuit CIS UNIT 12 9 10 11 8 1 5 4 6 7 3 2 R3 R2 B G R A VDD C3 NC C2 SP CLK GND C1 R1 C5 LED GND C4 VLED VREF GND R1=R2=100, R3=100K C1=C2=47F C3=100F, C4=0.1F, C5=100pF 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 |
Price & Availability of IA6008-CA11A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |