 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Synthesizer , SMT 400 MHz Features RoHS Compliant Fully Integrated VCO, PLL, Loop Filter High Performance, Low Cost Miniature SMT Package (LSM6) MAVC-060103-130400 Rev: C Description This synthesizer design integrates a high performance VCO, PLL, IC and discrete loop filter in a surface mount package. This SMT package provides electrical shielding, easy PCB assembly and repeatable performance. The synthesizer is designed for use in wireless base stations. M/A-COM synthesizers are manufactured in an ISO9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance and quality over volume production quantities. Electrical Specifications1: TA = +25C, Z0 = 50 Ohms, Vcc1 = 5V, Vcc2 = 3.3V. Parameter Frequency Range RF Output Power Phase Noise Test Conditions Over Top 2 Over Top 2 SSB at 100 Hz offset from carrier SSB at 1 kHz offset from carrier SSB at 10 kHz offset from carrier SSB at 100 kHz offset from carrier SSB at 1000 kHz offset from carrier Units MHz dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc Phase comparison frequency Other spurious dBc dBc dBc Over Fout , +/- 500Hz Recommended operating condition Recommended operating condition Recommended operating condition Recommended operating condition mS mA mA V V 4.75 3.1 20 27 9 5.0 3.3 -3.0 -83 -83 -110 -130 -148 -25 -73 -85 Min Typ 400 +3.0 -80 -80 -105 -127 -145 -20 -70 -80 -80 30 30 10 5.25 3.5 Max Harmonic Suppression Spurious Suppression (Non-Harmonic) Reference breakthrough Frequency Lock Time VCO Supply Current (ICC1) PLL Supply Current (ICC2) VCO Power Supply (VCC1) PLL Power Supply (VCC2) 1. All specification limits are indicated values @ +25 C and apply over Fout unless otherwise stated. 2. See "Absolute Maximum Ratings" for Top. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use. or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Synthesizer , SMT 400 MHz Electrical Specifications1: (cont'd) Parameter Step Size (F) Reference Frequency (FR) PLL Programming PLL Lock Monitor Output Test Conditions Recommended operating limit 1.0 V pp 0.2V square wave with input filter MAVC-060103-130400 Units kHz MHz Min Typ 1000 Max 6 10 100 3-wire serial CMOS IAW ADF4113, Charge Pump max current Logic high = VCC2 x 0.8 Min and Logic low = VCC2 x 0.2 Max Locked = VCC2 - 0.4 Min , Unlocked = 0.4V Max Pin Configuration Pin No. 1 2 3 4 5 6 7 Function VCC2 GND REF I/P GND VCC1 GND RF O/P Pin No. 8 9 10 11 12 13 14 Function GND Lock Detect Clock Data Load Enable GND GND Absolute Maximum Ratings TA = +25C Parameter VCO Supply Voltage (VCC1) PLL Supply Voltage (VCC2) Reference Frequency Level Data, Clock, Strobe Voltages Operating Temperature Storage Temperature Solder Assembly Temperature Weight TO CONTROLLER Absolute Maximum -0.3V to 6.5 V -0.3V to 6.5 V -0.3V to 6.5 V -0.3V to Vcc + 0.3 V -40C to +85C -45C to +120C See App Note M2032 3.0 grams 2 Functional Block Diagram Moisture Sensitivity Level ESD Rating 2 Class 1 13 1 10nF 2 GND DATA 11 GND VCC2 LOAD ENABLE 12 3 REF IN CLOCK 10 1. Operation of this device above any one of these parameters may cause permanent damage. 2. As per JEDEC-STD-020. 4 GND LOCK DETECT 9 Environmental Specifications Devices are designed to function after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. 50R 5 10nF 6 VCC1 GND 8 GND GND 14 RF OUT 7 Ordering Information 1. The diagram above shows a typical application. 2. The Reference input and RF output are internally AC coupled. 3. The diagram applies when digital lock detect is selected. For analog open-drain mode, a filter is required. Part Number MAVC-060103-130400 1. See application note M513. Package Tape and Reel (300/Reel) 1 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use. or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Synthesizer , SMT 400 MHz Recommended PCB Layout MAVC-060103-130400 1. 2. 3. Tolerance: 0.1mm Both views are shown from top of device. Crossed hatched areas to be left clear. These areas may have active vias. Outline Drawing 1. 2. 3. 4. 5. Plating: Au, 0.05m -- 0.15m over Ni barrier of 2.5m -- 5.0m. Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free. Substrate: FR4 Cover: mild steel Tolerance: 0.2mm unless otherwise noted. ECO History Rev A B C 3 Date Dec 8th 2005 Create datasheet Description By JS JS JS Dec 15th 2005 Change of the reference frequency specification from Min=10, Typ=, to Min=6, Typ=10, Feb 20th 2005 Change of 1000kHz SSB Phase noise from Typically Change of 1000kHz SSB Phase noise from Max -150 to -148dBc/Hz, -147 to -145dBc/Hz. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use. or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAVC-060103-130400
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |