![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NC7SU04 TinyLogic HS Unbuffered Inverter October 1995 Revised August 2004 NC7SU04 TinyLogic HS Unbuffered Inverter General Description The NC7SU04 is a single special purpose CMOS Inverter. The inverter circuit is designed with a single unbuffered stage to facilitate use in crystal oscillator applications. It is not intended for use in logic inversion applications. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation over a broad VCC range. ESD protection diodes inherently guard both input and output with respect to the VCC and GND rails. Features s Space saving SOT23 or SC70 5-lead package s Ultra small MicroPak leadless package s Unbuffered for crystal oscillator applications s Low Quiescent Power; ICC < 1 A s Balanced Output Drive; 2 mA IOL, -2 mA IOH s Broad VCC Operating Range; 2V-6V s Balanced Propagation Delays s Specified for 3V operation Ordering Code: Order Number NC7SU04M5X NC7SU04P5X NC7SU04L6X Package Number MA05B MAA05A MAC06A Product Code Top Mark 7SU4 SU4 E5 Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC Connection Diagrams Pin Assignments for SOT23 and SC70 Pin Descriptions Pin Names A Y NC Description Input Output No Connect (Top View) Pad Assignments for MicroPak Function Table Y=A Input A L H H = HIGH Logic Level L = LOW Logic Level Output Y H L (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak are trademarks of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS012142 www.fairchildsemi.com NC7SU04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) @ VIN -0.5V @ VIN VCC +0.5V DC Input Voltage (VIN) DC Output Diode Current (IOK) @ VOUT < -0.5V @ VOUT > VCC +0.5V DC Output Voltage (VOUT) DC Output Source or Sink Current (IOUT ) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) Lead Temperature (TL); (Soldering, 10 seconds) 260C -0.5V to +7.0V -20 mA +20 mA -0.5V to VCC + 0.5V -20 mA +20 mA -0.5V to VCC + 0.5V 12.5 mA 25 mA -65C to +150C 150C Recommended Operating Conditions (Note 2) Supply Voltage (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Thermal Resistance (JA) SOT23-5 SC70-5 300C/W 425C/W 2.0V to 6.0V 0V to VCC 0V to VCC -40C to +85C Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VCC (V) 2.0 3.0 4.5 6.0 VIL LOW Level Input Voltage 2.0 3.0 4.5 6.0 VOH HIGH Level Output Voltage 2.0 3.0 4.5 6.0 3.0 4.5 6.0 VOL LOW Level Output Voltage 2.0 3.0 4.5 6.0 3.0 4.5 6.0 IIN ICC Input Leakage Current Quiescent Supply Current 6.0 6.0 1.80 2.5 4.00 5.50 2.68 4.18 5.68 2.0 3.0 4.5 5.9 2.82 4.33 5.76 0.00 0.00 0.01 0.04 0.11 0.12 0.15 0.20 0.50 0.50 0.50 0.26 0.26 0.26 0.1 1.0 Min 1.70 2.45 3.60 4.80 0.30 0.50 0.90 1.20 1.80 2.50 4.00 5.50 VIN = GND 2.63 4.13 5.63 0.20 0.50 0.50 0.50 VIN = VCC 0.33 0.33 0.33 1.0 10.0 A A V IOL = 1.3 mA IOL = 2 mA IOL = 2.6 mA VIN = VCC, GND VIN = VCC, GND V IOL = 20 A VIN = VIH V IOH = -1.3 mA IOH = -2 mA IOH = -2.6 mA V IOH = -20 A VIN = VIL TA = +25C Typ Max TA = -40C to +85C Min 1.70 2.45 3.60 4.80 0.30 0.50 0.90 1.20 V V Max Units Conditions www.fairchildsemi.com 2 NC7SU04 AC Electrical Characteristics Symbol tPLH, tPHL Parameter Propagation Delay VCC (V) 5.0 2.0 3.0 4.5 6.0 tTLH, tTHL Output Transition Time 5.0 2.0 3.0 4.5 6.0 CIN CPD Input Capacitance Power Dissipation Capacitance Open 5.0 Min TA = +25C Typ 3 17 9 7 6.5 4 25 16 12 10 2 4 Max 15 100 27 20 17 10 125 35 25 21 10 155 45 31 26 10 pF pF (Note 3) Figure 2 ns CL = 50 pF Figures 1, 3 125 35 25 21 ns CL = 15 pF ns CL = 50 pF Figures 1, 3 TA = -40C to +85C Min Max Units ns Conditions CL = 15 pF Figure Number Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; PRR = variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SU04 Tape and Reel Specification TAPE FORMAT for SOT23 and SC70 Package Tape Designator M5X, P5X Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A 0.093 (2.35) 0.130 (3.3) DIM B 0.096 (2.45) 0.130 (3.3) DIM F (3.5 0.10) (3.5 0.05) DIM Ko (1.35 0.10) (1.4 0.11) DIM P1 0.157 (4) 0.157 (4) DIM W 0.315 0.004 (8 0.1) 0.315 0.012 (8 0.3) 0.138 0.004 0.053 0.004 0.138 0.002 0.055 0.004 www.fairchildsemi.com 4 NC7SU04 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SU04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7SU04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7SU04 TinyLogic HS Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of NC7SU0404
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |