View PE4126-EK_1294972.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Specification
PE4126
Product Description
The PE4126 is a high linearity, passive Quad MOSFET Mixer for DCS 1800 Base Station Receivers exhibiting high dynamic range performance over a broad LO drive range up to 20 dBm. This mixer integrates passive matching networks to provide single-ended interfaces for the RF and LO ports, eliminating the need for external RF baluns or matching networks. The PE4126 is optimized for frequency down-conversion using low-side LO injection for DCS 1800 Base Station applications, and is also suitable for use in up-conversion applications. The PE4126 is manufactured on Peregrine's UltraCMOSTM process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram High Linearity Quad MOSFET Mixer for DCS 1800 BTS Features
* Integrated, single-ended RF & LO
interfaces
* High linearity: IIP3 of +32 dBm,
1700 - 1800 MHz (+17 dBm LO)
* Low conversion loss: 7.9 dB
(+17 dBm LO)
* High Isolation: typical LO-IF at 37 dB,
LO-RF at 38 dB (1.8 GHz)
* Designed for low-side LO injection
Figure 2. Package Type
8-lead TSSOP
LO
RF
PE4126
IF
Table 1. AC and DC Electrical Specifications @ +25 C (ZS = ZL = 50 )
Parameter
Frequency Range: LO RF IF1 Conversion Loss2 Isolation: LO-RF 1.7 GHz 1.75 GHz 1.8 GHz LO-IF Input IP3 Input 1 dB Compression Notes: 30 32 34 33 30
Minimum
1450 1700 --
Typical
--250 7.9 34 36 38 37 32 21
Maximum
1550 1800 -8.3
Units
MHz MHz MHz dB dB dB dB dB dBm dBm
1. An IF frequency of 250 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO frequencies are within the specified maximum and minimum. 2. Conversion Loss includes loss of IF transformer (M/ACom ETK4-2T - nominal loss 0.7 dB at 250 MHz.)
*Test conditions unless otherwise noted: LO = 250 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm. Document No. 70-0045-04 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 8
PE4126
Product Specification
Figure 3. Pin Configuration (Top View)
Table 3. Absolute Maximum Ratings
Symbol Parameter/Conditions
Storage temperature range Operating temperature range LO input power RF input power ESD Sensitive Device
Min
-65 -40
Max
150 85 20 16 250
Units
C C dBm dBm V
LO GND RF
1 2 3
8 7 6 5
GND IF1
TST TOP PLO
IF2 GND
PRF VESD
GND
4
PE4126
Table 2. Pin Descriptions
Pin No.
1
Pin Name
LO LO Input
Description
Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Functional operation should be restricted to the limits in the DC Electrical Specifications table. Exposure to absolute maximum ratings for extended periods may affect device reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up.
2
GND
Ground connection for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. RF Input Ground. Ground. IF differential output IF differential output Ground.
3 4 5 6 7 8
RF GND GND IF2 IF1 GND
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 8
Document No. 70-0045-04 UltraCMOSTM RFIC Solutions
PE4126
Product Specification
Evaluation Kit
Figure 4. Evaluation Board Layout
Peregrine Specification 101/0054
Table 4. Bill of Materials
Reference
T2 U1 (Not Labeled) R1 J1, J2, J3
Value / Description
M/A Com ETK4-2T PE4126 Mixer 0 SMA Connector
Pin1
Applications Support
If you have a problem with your evaluation kit or if you have applications questions, please contact applications support: E-Mail: help@psemi.com (fastest response) Phone: (858) 731-9400
Figure 5. Evaluation Board Schematic Diagram
LO GND RF GND IF1 IF2 GND
IF
GND
PE4126
T2 M/A-Com E-Series RF 4:1 Transformer 2.0 - 1000 MHz ETK4-2T
Figure 6. Evaluation Board Testing Block Diagram, 2-Tone Setup
4126 PA
3 dB
Sig Gen
LO
Eval Board
IF
3 dB
RF
3 dB
Spectrum Analyzer
Sig Gen
6 dB
Hybrid Tee
6 dB
Sig Gen
Document No. 70-0045-04 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 8
PE4126
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=250 MHz) Figure 7. Conversion Loss vs. Frequency Figure 8. Input 1dB Compression vs. Frequency
0
30
-2
1dB Compression (dBm)
25
Conversion Loss (dB)
20 -40 C 25 C 15 85 C
-4
-6
-40 C 25 C
85 C
10
-8
5
-10 1700
1720
1740
1760
1780
1800
0 1700
1720
1740
1760
1780
1800
Frequency (MHz)
Frequency (MHz)
Figure 9. Input IP3 vs. Frequency
Figure 10. Output IP3 vs. Frequency
40
35
30
30 -40 C 25 C IIP3 (dBm) 20 85 C
25 OIP3 (dBm)
20 -40 C 25 C 85 C 15
10
10
5
0 1700
1720
1740
1760
1780
1800
0 1700
1720
1740
1760
1780
1800
Frequency (MHz)
Frequency (MHz)
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 8
Document No. 70-0045-04 UltraCMOSTM RFIC Solutions
PE4126
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=250 MHz) Figure 11. LO-IF Isolation vs. Frequency Figure 12. LO-RF Isolation vs. Frequency
0
0
-10 LO-IF Isolation (dB)
-10
-20
LO-RF Isolation (dB)
-20
-30
25 C
85 C -30
-40 -40 C -50 1700 85 C
-40
25 C -40 C
1720
1740
1760
1780
1800
-50 1700
1720
1740
1760
1780
1800
Frequency (MHz)
Frequency (MHz)
Figure 13. LO Port Return Loss @ 25C
Figure 14. RF Port Return Loss @ 25C
0
0
-5
-5
Return Loss (dB)
-10
Return Loss (dB)
-10
-15
-15
-20
-25 1.3 1.35 1.4 1.45 Frequency (GHz) 1.5 1.55 1.6
-20 1.6 1.65 1.7 1.75 Frequency (GHz) 1.8 1.85 1.9
Document No. 70-0045-04 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 8
PE4126
Product Specification
Typical Performance Data @ +25 C (RF=3 dBm, IF=250 MHz) Figure 15. Conversion Loss across LO Power Figure 16. Input IP3 across LO Power
-7 -8 -9 Conversion Loss (dB) -10
LO=17dBm
40
LO=20dBm LO=14dBm
LO=11dBm LO=8dBm
35
LO=20dBm
Input IP3 (dBm)
LO=5dBm
30
LO=17dBm
-11 -12 -13
LO=-1dBm
LO=14dBm
25
LO=11dBm LO=8dBm LO=5dBm LO=2dBm
LO=2dBm
20
-14 -15 1600 15 1600
LO=-1dBm
1650
1700
1750
1800
1850
1900
1650
1700
1750
1800
1850
1900
Frequency (MHz)
Frequency (MHz)
Table 5. Spurious Response
mFRF + nFLO nFLO mFRF 0 1 2 3 4
0 ---29.09 -46.87 -65.13 -66.25 1 -17.62 -4.35 -44.86 -72.52 -61.24 2 -13.47 -35.01 -49.17 -72.12 -63.63 3 -12.86 -31.89 -54.75 -75.79 -62.69 4 -16.16 -49.06 -52.99 -68.53 -66.03
Table 6. Spurious Response
mFRF - nFLO nFLO mFRF 0 1 2 3 4
0 ---29.09 -46.87 -65.13 -66.25 1 -17.62 0.00 -47.53 -59.49 -51.40 2 -13.47 -34.93 -53.02 -57.17 -48.87 3 -12.86 -15.17 -51.81 -56.88 -54.82 4 -16.16 -31.41 -55.21 -56.95 -51.80
Normalized to dB below PIF (RF=1750 Mhz @ 0 dBm, LO=1500 MHz @ 17 dBm)
Normalized to dB below PIF (RF=1750 Mhz @ 0 dBm, LO=1500 MHz @ 17 dBm)
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 8
Document No. 70-0045-04 UltraCMOSTM RFIC Solutions
PE4126
Product Specification
Figure 17. Package Drawing
8-lead TSSOP
TOP VIEW 0.65BSC 8 7 6 5
3.20
2X
12o REF 0.20 4.400.10 R 0.90 MIN
O1.000.10 GAGE PLANE -B1 2 3 4 0.325 .20 C B A 0.25 12 REF
o
R 0.90 MIN 0o 8o +.15 0.60 -.10 1.0 REF
1.00
1.00
-A-
3.000.10
0.900.05
1.10 MAX -C0.10 C 0.10 0.30 MAX CB A 0.100.05 6.40 SIDE VIEW
FRONT VIEW
Table 7. Ordering Information
Order Code
4126-21 4126-22 4126-00
Part Marking
4126 4126 PE4126-EK
Description
PE4126-08TSSOP-100A PE4126-08TSSOP-2000C PE4126-08TSSOP-EK
Package
8-lead TSSOP 8-lead TSSOP Evaluation Board
Shipping Method
100 units / Tube 2000 units / T&R 1 / Box
Document No. 70-0045-04 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 8
PE4126
Product Specification
Sales Offices
The Americas Peregrine Semiconductor Corporation
9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499
North Asia Pacific Peregrine Semiconductor K.K.
5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213
Europe Peregrine Semiconductor Europe
Batiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73
Peregrine Semiconductor, Korea
#B-2402, Kolon Tripolis, #210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-480 S. Korea Tel: +82-31-728-4300 Fax: +82-31-728-4305
South Asia Pacific Peregrine Semiconductor, China
Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652
Space and Defense Products
Americas: Tel: 505-881-0438 Fax: 505-881-0443 Europe, Asia Pacific: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp.
Preliminary Specification
The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice).
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 8
Document No. 70-0045-04 UltraCMOSTM RFIC Solutions

▲Up To Search▲

Price & Availability of PE4126-EK

	To Download PE4126-EK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .