|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1 Mux/DeMux Switch with Dual Enable Features * * * * * * * * 5 different channels, 2:1 Mux/DeMux LVDS signal switching beyond 2.5Gbps Low bit-to-bit skew, 8ps Low crosstalk: -70dB @ 10MHz Switching speed: 4ns VCC Operating Range: +1.5V to +2.0V ESD: Data bits @ 8kV HBM, select bits @ 2kV HBM Packaging (Pb-free & Green): - 64-pin TSSOP (A) Description Pericom Semiconductor's PI2LVD512 is a 10- to 5-channel multiplexer/demultiplexer Switch. The device multiplexes differential signals to one of two corresponding outputs. The switch is bidirectional. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is compatible with various differential standards such as LVDS Pin Description 64-TSSOP Applications * Routes physical layer signals for high-speed, high bandwidth differential protocols Block Diagram 1 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Maximum Ratings (Above which useful life may be impaired. For user guidelines, not tested.) Storage Temperature....................................-65C to +150C Supply Voltage to Ground Potential...............-0.5V to +2.5V DC Input Voltage ............................................-0.5V to VCC DC Output Current......................................................120mA Power Dissipation...........................................................0.5W Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Truth Table Function AN to NB1, N = 0, 1, 2, 3 AN to NB2, N = 0, 1, 2, 3 AN to NB1, N = 4, 5, 6, 7, 8, 9 AN to NB2, N = 4, 5, 6, 7, 8, 9 SEL0 L H X X SEL1 X X L H DC Electrical Characteristics for Switching over Operating Range (TA = -40C to +85C, VCC = 1.5V to 2.0V) Paramenter VIH VIL VIK IIH IIL Description Input HIGH Voltage Input LOW Voltage Clamp Diode Voltage Input HIGH Current Input LOW Current Test Conditions(1) Min. 0.65 x VCC -0.5 Typ.(2) -0.7 Max. 0.35 x VCC -1.2 5 5 A V Units Guaranteed HIGH level Guaranteed LOW level VCC = Max., IIN = -18mA VCC = Max., VIN = VCC VCC = Max., VIN = GND Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 1.8V, TA = 25C ambient and maximum loading. 2 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Power Supply Characteristics Parameters ICC Description Quiescent Power Supply Current Test Conditions(1) VCC = Max., VIN = GND or VCC Min. Typ.(2) 400 Max. Units A Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 1.8V, TA = 25C ambient and maximum loading. Dynamic Electrical Characteristics Over the Operating Range (TA= -40 to +85C, VCC = 1.8V10%, GND=0V) Parameter XTALK(1) OIRR(1) BW Description Crosstalk Test Conditions See Fig. 1 for Measurement Setup, f = 10 MHz See Fig. 2 for Measurement Setup, f = 10 MHz Min. Typ. -70 Max. Units dB -65 1.26 GHz OFF Isolation -3dB Bandwidth Note: 1. Guaranteed by design. Fig 1. Crosstalk Setup 3 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Fig 2. Off-isolation setup CH1 A/R log MAG Cor 10 dB/ REF -20 dB -44.102 dB 100 MHz Select Letter Space Back Space Hld 0 Erase Title Done STOR DEV [DISK] IF BW 300 Hz Start 100 kHz Power 0 dbm SWP 1.624 sec STOP 1.8 GHz Cancel Fig 3. Crosstalk 4 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Fig 4. Off Isolation Switching Characteristics (TA= -40 to +85C, VCC = 1.8V10%) Paramenter tPZH, tPZL tPHZ, tPLZ tb-b tch-ch Description Line Enable Time - SEL to AN, BN Line Disable Time - SEL to AN, BN Bit-to-bit skew Channel-to-channel skew Min. 0.5 0.5 Typ.(2) 8 45 Max. 8.0 4.0 Units ps ps Note: 1. For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. Fig 5. Bandwidth, VCC = 1.8V, 25C 5 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Fig 6. Bandwidth vs. Load 6 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Test Circuit for Electrical Characteristics(1) 2 x VCC VCC 200-ohm Pulse Generator VIN RT D.U.T VOUT 4pF CL 200-ohm Notes: 1. CL = Load capacitance: includes jig and probe capacitance. 2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator 3. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. 4. All input impulses are supplied by generators having the following characteristics: PRR MHz, ZO = 50, tR 2.5ns, tF 2.5ns. 5. The outputs are measured one at a time with one transition per measurement. Switch Positions Test tPLZ, tPZL (output on B-side) tPHZ, tPZH (output on B-side) Switch 2 x VCC GND Test Circuit for Dynamic Electrical Characteristics HP4396B or Equivalent S1 R1 T1 PI2LVD512 HP11667A 7 PS8807 01/18/06 PI2LVD512 1.8V, Wide-Bandwidth, 5 Differential Channels, 2:1, Mux/DeMux Switch with Dual Enable Switching Waveforms SEL VCC/2 VCC VCC/2 0V tPLZ Output tPZL VCC/2 tPZH VOH VOL + 0.15V tPHZ VOL VOH VOL VCC/2 Output VOH - 0.15V Voltage Waveforms Enable and Disable Times Packaging Mechanical: 64-pin TSSOP (A) 64 .236 .244 6.0 6.2 1 .665 .673 16.9 17.1 1.20 .047 Max. SEATING PLANE 0.45 .018 0.75 .030 .004 .008 0.09 0.20 .319 BSC 8.1 .004 0.10 .0197 BSC 0.50 .007 0.17 .011 0.27 .002 .006 0.05 0.15 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Ordering Information Ordering Code PI2LVD512AE Package Code AE Package Description Pb-free and Green, 64-Pin TSSOP Notes: * Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ * E = Pb-free and Green * X suffix = Tape/Reel 8 PS8807 01/18/06 |
Price & Availability of PI2LVD512AE |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |