![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier February 2006 MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Description This device is designed for general purpose amplifier applications at collector currents to 300mA. Sourced from Process 73 Absolute Maximum Ratings* TA = 25C unless otherwise specified. Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous Operating and Storage Junction Temperature Range Symbol VCES VCBO VEBO IC TJ, TSTG Value -80 -80 -4.0 -500 -55 to +150 Unit V V V mA C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Notes: 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics TA = 25C unless otherwise noted. Max Characteristic Total Device Dissipation, Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol PD RJC RJA MPSA56 625 5.0 83.3 200 *MMBTA56 350 2.8 357 **PZTA56 1,000 8.0 125 Units mW mW/C C/W C/W *Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06." **Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead min. 6 cm 2. Packages MPSA56 C MMBTA56 C PZTA56 E C B E C B TO-92 E SOT-23 Mark: 2G B SOT-223 (c)2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Electrical Characteristics TA = 25C unless otherwise specified. Parameter OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Collector-Cutoff Current ON CHARACTERISTICS DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage SMALL SIGNAL CHARACTERISTICS Current Gain - Bandwidth Product Symbol V(BR)CEO V(BR)CBO V(BR)EBO ICEO ICBO hFE VCE(sat) VBE(on) fT Test Condition IC = -1.0mA, IB = 0 IC = -100A, IE = 0 IE = -100A, IC = 0 VCE = -60V, IB = 0 VCB = -80V, IE = 0 IC = -10mA, VCE = -1.0V IC = -100mA, VCE = -1.0V IC = -100mA, IB = -10mA IC = -100mA, VCE = -1.0V IC = -100mA, VCE = -1.0V, f = 100MHz Min. -80 -80 -4.0 Max. Units V V V -0.1 -0.1 100 100 -0.2 -1.2 50 A A V V MHz *Pulse Test: Pulse Width 300s, Duty Cycle 2.0% Note: All voltages (V) and currents (A) are negative polarity for PNP transistors. Spice Model PNP (Is=12.27p Xti=3 Eg=1.11 Vaf=100 Bf=91.63 Ne=1.531 Ise=12.27p Ikf=1.009 Xtb=1.5 Br=1.287 Nc=2 Isc=0 Ikr=0 Rc=.6 Cjc=48.28p Mjc=.5615 Vjc=.75 Fc=.5 Cje=106.7p Mje=.5168 Vje=.75 Tr=496.3n Tf=865.8p Itf=.2 Vtf=2 Xtf=.8 Rb=10) 2 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Typical Characteristics V CESAT - COLLECTOR EMITTE R VOLTAGE (V) TYP ICAL PULSED CURRE NT GAIN Typical Pulsed Current Gain vs Collector Curren 300 250 200 150 25C 125C Collector-Emitter Saturation Voltage vs Collector Current -0.8 = 10 -0.6 VCE = -1V -0.4 25C 100 - 40C -0.2 - 40C 125C 50 -0.001 -0.01 -0.1 I C - COLLECTOR CURRENT (A) -1 FE - h 0 -1 -100 I C - COLLECTOR CURRE NT (mA) -1.2 V BE( ON)- BAS E EMITTER ON VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current V BESAT - BASE EM ITTE R VOLTAGE (V) = 10 Base Emitter ON Voltage vs Collect or Current -1.2 VCE = -1V -1 - 40C -1 - 40C -0.8 -0.6 -0.4 -0.2 0 -0.1 25C 125C -0.8 25C 125C -0.6 -0.4 -10 -100 I C - COLLECTOR CURRE NT (mA) -1000 -1 -10 -100 I C - COLLECTOR CURRENT (mA) -1000 Collector-Cutoff Current vs Ambient Temperature I CBO - COLLECTOR CURRENT (nA) -10 V CB = -60V -1 100 Input and Output Capacitance vs Reverse Voltage f = 1.0 MHz CAPACITANCE (pF) C ib -0.1 -0.01 Cob -0.001 25 50 75 100 T A - AMBIENT TEMPERATURE (C) 125 -0.1 -1 -10 VCE - COLLECTOR VOLTAGE (V) -100 3 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier Typical Characteristics (Continued) V CE - COLLECTOR-EMITTER VOLTAGE (V) Collector Saturation Region -10 f T - GAIN BANDWIDTH PRODUCT (MHz) Gain Bandwidth Product vs Collector Current 350 -8 TA = 25C V CE = -5V 300 250 200 150 100 50 0 -1 -10 -100 -6 I= -4 -1mA -10mA -100mA -2 0 -3000 -5000 -10000 -20000 -30000 -50000 I B - BASE CURRENT (A) IC - COLLECTOR CURRENT (mA) Power Dissipation vs Ambient Temperature 1 P D - POWER DISSIPATION (W) 0.75 SOT-223 TO-92 0.5 SOT-23 0.25 0 0 25 50 75 100 TEMPERATURE ( oC) 125 150 4 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample FAIRCHILD SEMICONDUCTOR CORPORATION LOT: CBVK741B019 QTY: HTB:B 10000 See Fig 2.0 for various Reeling Styles NSID: PN2222N SPEC: D/C1: D9842 SPEC REV: QA REV: B2 FSCINT Label (FSCINT) 5 Reels per Intermediate Box F63TNR Label Customized Label 375mm x 267mm x 375mm Intermediate Box F63TNR Label sample LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: QTY1: QTY2: QTY: 2000 SPEC: SPEC REV: CPN: N/F: F Customized Label (F63TNR)3 TO-92 TNR/AMMO PACKING INFROMATION Packing Reel Style A E Ammo M P Quantity 2,000 2,000 2,000 2,000 EOL code D26Z D27Z D74Z D75Z AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units FSCINT Label 327mm x 158mm x 135mm Immediate Box Customized Label 5 Ammo boxes per Intermediate Box F63TNR Label 333mm x 231mm x 183mm Intermediate Box Customized Label (TO-92) BULK PACKING INFORMATION EOL CODE J18Z J05Z NO EOL CODE DESCRIPTION TO-18 OPTION STD TO-5 OPTION STD TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96 TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98 LEADCLIP DIMENSION NO LEAD CLIP NO LEAD CLIP NO LEADCLIP QUANTITY 2.0 K / BOX 1.5 K / BOX 2.0 K / BOX BULK OPTION See Bulk Packing Information table Anti-static Bubble Sheets FSCINT Label L34Z NO LEADCLIP 2.0 K / BOX 2000 units per EO70 box for std option 114mm x 102mm x 51mm Immediate Box 5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label FSCINT Label 10,000 units maximum per intermediate box for std option 5 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data (Continued) TO-92 Reeling Style Configuration: Figure 2.0 Machine Option "A" (H) Machine Option "E" (J) Style "A", D26Z, D70Z (s/h) Style "E", D27Z, D71Z (s/h) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D74Z (M) ORDER STYLE D75Z (P) FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP 6 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Tape and Reel Data (Continued) TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Hd P Pd b Ha H1 HO d L L1 W1 S WO W2 W t t1 P1 F1 P2 DO ITEM DESCRIPTION PO Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness SYMBOL b Ha HO H1 Pd Hd P PO P1 P2 F1/F2 d L L1 t t1 W WO W1 W2 DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (+0.009, -0.010) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.018 (+0.002, -0.003) 0.429 (max) 0.209 (+0.051, -0.052) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.708 (+0.020, -0.019) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (+0.008, -0.007) 0.004 (max) User Direction of Feed TO-92 Reel Configuration: Figure 5.0 Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out Note : All dimensions are in inches. ELECT ROSTATIC SEN SITIVE D EVICES D4 D1 ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM F63TNR Label Customized Label D2 Reel Diameter Arbor Hole Diameter (Standard) (Small Hole) Core Diameter Hub Recess Inner Diameter Hub Recess Depth Flange to Flange Inner Width W1 Hub to Hub Center Width W3 Note: All dimensions are inches D1 D2 D2 D3 D4 W1 W2 W3 13.975 1.160 0.650 3.100 2.700 0.370 1.630 14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090 W2 D3 7 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TO-92 Package Dimensions TO-92 (FS PKG Code 92, 94, 96) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 8 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1. 0 Customized La bel Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a m ultilayer film (Heat Activated Adhesive in na ture) primarily composed of polyester film, adhesive layer, sealan and an t, ti-static sprayed agent. These reeled pa in stan rd option are shippe with rts da d 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color an is made of polystyrene plastic (antid static coated Othe option comes in 10,000 units per 13" ). r or 330cm diameter reel. This and s ome other options are describe in the P d ackaging Information table. These full reels are individua labele an placed inside lly dd as tanda intermediate made of recyclable corrugated rd brown pap with a Fairchil d logo printing. One pizza box er contains eight reels maximum. And thes intermed e iate boxes are placed inside a labeled shipping box which comes in different sizes depending on t e nu h mber of parts shippe d. Antistatic Cover Tape Human Readable Label Embossed Carrier Tape 3P SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code ) TNR 3,000 7" Dia 187x107x183 24,000 0.0082 0.1175 D87Z TNR 10,000 13" 343x343x64 30,000 0.0082 0.4006 3P 3P 3P SOT-23 Unit Orientation 343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label Human Readable Label sample H uman readable Label SOT-23 Tape Leader and Trailer Configuration: Figure 2. 0 187mm x 107mm x 183mm Intermediate Box for Stand Option ard Carrier Tape Cover Tape Trailer Tape 300mm minimum or 75 empt y poc kets Components Leader Tape 500mm minimum or 125 empty pockets 9 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Tape and Reel Data (Continued) SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 T E1 P2 D0 D1 F E2 B0 Wc W Tc K0 P1 A0 User Direction of Feed Dimensions are in millimeter Pkg type SOT-23 (8mm) A0 3.15 +/-0.10 B0 2.77 +/-0.10 W 8.0 +/-0.3 D0 1.55 +/-0.05 D1 1.125 +/-0.125 E1 1.75 +/-0.10 E2 6.25 min F 3.50 +/-0.05 P1 4.0 +/-0.1 P0 4.0 +/-0.1 K0 1.30 +/-0.10 T 0.228 +/-0.013 Wc 5.2 +/-0.3 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SOT-23 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 8mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 2.165 55 4.00 100 Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 0.567 14.4 Dim W3 (LSL-USL) 0.311 - 0.429 7.9 - 10.9 0.311 - 0.429 7.9 - 10.9 8mm 13" Dia 10 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-23 Package Dimensions SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 11 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. F63TNR Label Antistatic Cover Tape Static Dissipative Embossed Carrier Tape F852 014 SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 2,500 13" Dia 343x64x343 5,000 0.1246 0.7250 D84Z TNR 500 7" Dia 184x187x47 1,000 0.1246 0.1532 F852 014 F852 014 F852 014 SOT-223 Unit Orientation 343mm x 342mm x 64mm Intermediate box for Standard F63TNR Label F63TNR Label 184mm x 184mm x 47mm Pizza Box for D84Z Option F63TNR Label sample LOT: CBVK741B019 FSID: PN2222A QTY: 3000 SPEC: SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Trailer Tape 300mm minimum or 38 empty pockets Components Leader Tape 500mm minimum or 62 empty pockets 12 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Tape and Reel Data (Continued) SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 T E1 P0 D0 F K0 Wc B0 E2 W Tc A0 P1 D1 User Direction of Feed Dimensions are in millimeter Pkg type SOT-223 (12mm) A0 6.83 +/-0.10 B0 7.42 +/-0.10 W 12.0 +/-0.3 D0 1.55 +/-0.05 D1 1.50 +/-0.10 E1 1.75 +/-0.10 E2 10.25 min F 5.50 +/-0.05 P1 8.0 +/-0.1 P0 4.0 +/-0.1 K0 1.88 +/-0.10 T 0.292 +/0.0130 Wc 9.5 +/-0.025 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SOT-223 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 12mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 5.906 150 7.00 178 Dim W1 0.488 +0.078/-0.000 12.4 +2/0 0.488 +0.078/-0.000 12.4 +2/0 Dim W2 0.724 18.4 0.724 18.4 Dim W3 (LSL-USL) 0.469 - 0.606 11.9 - 15.4 0.469 - 0.606 11.9 - 15.4 12mm 13" Dia 13 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier SOT-223 Package Dimensions SOT-223 (FS PKG Code 47) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.1246 14 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com MPSA56/MMBTA56/PZTA56 PNP General Purpose Amplifier TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST(R) ActiveArrayTM FASTrTM BottomlessTM FPSTM Build it NowTM FRFETTM CoolFETTM GlobalOptoisolatorTM CROSSVOLTTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM 2 E CMOSTM i-LoTM EnSignaTM ImpliedDisconnectTM FACTTM IntelliMAXTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM DISCLAIMER ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET(R) UniFETTM VCXTM WireTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDiS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 15 MPSA56/MMBTA56/PZTA56 Rev. 1.0.2 www.fairchildsemi.com |
Price & Availability of PZTA56
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |