Part Number Hot Search : 
EM91450D DS33R11 74LVX02 XJXXX BD1396S RT0302 PM6602 2833PS
Product Description
Full Text Search
 

To Download SFC05-4 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 05131
SFC05-4
Only One Name Means ProT ek'TionTM
FLIP CHIP ARRA Y
APPLICA TIONS Cellular Phones Personnal Digital Assistant (PDA) Ground Positioning System (GPS) SMART & PCMCIA Cards IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 24A, 8/20s - Level 2(Line-Gnd) & Level 3(Line-Line) FEA TURES ESD Protection > 25 kilovolts 300 Watts Peak Pulse Power per Line (tp = 8/20s) Protects up to Four (4) Unidirectional Lines RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS Weight 0.73 milligrams (Approximate) Available in Tin-Lead or Lead-Free Plating Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245C Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270C Flammability Rating UL 94V-0 8mm Plastic & Paper Tape and Reel Per EIA Standard 481 Device Marking On Reel Top Contacts: Solder Bump 0.004" in Height (Nominal) PIN CONFIGURA TION
QUAD
6
5
4
1
2 BOTTOM VIEW
3
05131.R6 4/05
1
www.protekdevices.com
SFC05-4
DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 300 -55C to 150C -55C to 150C UNITS Watts C C
ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified
PART NUMBER RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 5A VC VOLTS 9.5 MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE
VWM VOLTS SFC05-4 5.0
@ 1mA V(BR) VOLTS 6.0
@8/20s VC @ IPP 11.0V @ 24A
@VWM ID A 10
@0V, 1 MHz Cj pF 150
FIGURE 1 PEAK PULSE POWER VS PULSE TIME
10,000
IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts
120 100 80 60 40 20 0 tf
FIGURE 2 PULSE WAVE FORM
Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s
1,000 300W, 8/20s Waveform
e-t
100
td = t I /2 PP
10 0.01
1
10 100 td - Pulse Duration - s
1,000
10,000
0
5
10
15 t - Time - s
20
25
30
05131.R6 4/05
2
www.protekdevices.com
SFC05-4
GRAPHS
FIGURE 3 POWER DERATING CURVE
Peak Pulse Power 8/20s
100 80
% Of Rated Power
60
40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - C 150
FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR SFC05-4
35
5 Volts per Division
25
15
5
-5 ESD Test Pulse - 25 kilovolt, 1/30ns (waveshape)
FIGURE 5 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR SFC05-4
14 12 10 8 6 4 2 0 0 5 10 IPP - Peak Pulse Current - Amps 05131.R6 4/05 3 www.protekdevices.com 15 20
VC - Clamping Voltage - Volts
SFC05-4
APPLICA TION INFORMA TION
PRINTED CIRCUIT BOARD RECOMMENDATIONS PARAMETER
Pad Size on PCB Pad Shape Pad Definition Solder Mask Opening Solder Stencil Thickness Solder Stencil Aperture Opening (laser cut, 5% tapered walls) Solder Paste Type Pad Protective Finish Tolerance - Edge To Corner Ball Solder Ball Side Coplanarity Maximum Dwell Time Above Liquidous (183C) Soldering Maximum Temperature
VALUE
0.275mm Round Non-Solder Mask Defined Pads 0.325mm Round 0.150mm 0.330mm Round No Clean OSP(Entek Cu Plus 106A) 50m 20m 60 Seconds 270C
REQUIREMENTS
Temperature: TP for Lead-Free (SnAgCu): 260-265C TP for Tin-Lead: 240-245C Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area & plating.
RECOMMENDED NON-SOLDER MASK DEFINED PAD ILLUSTRATION
Non-Solder Mask Defined Pad 0.275mm DIA.
Solder Mask Opening 0.325mm DIA.
Solder Stencil Opening 0.330mm DIA.
TP Ramp-up
Temperature - C
Ramp-down TL TSMAX 155 TSMIN 140 TS - Preheat
t 25C to Peak 30-60 seconds
Ramp-up 15 seconds
Solder Time 15-20 seconds
Ramp-down
05131.R6 4/05
4
www.protekdevices.com
SFC05-4
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
PACKAGE DIMENSIONS
DIM A B C MILLIMETERS 0.510 0.510 0.99 0.0254 0.15 NOM 1.5 0.0254 0.15 NOM See Note 3 0.076 MIN I 0.419 NOM INCHES 0.020 0.020 0.039 0.001 0.006 NOM 0.059 0.001 0.006 NOM See Note 3 0.003 MIN 0.0165 NOM
B
SIDE C A
E F G H
TOP
G
E F H
NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx 0.05mm ( 0.002"). 3. "H" Dimensions for the SFC05-4 device are 0.10mm Max and 0.004" Max.
END
I
MOUNTING PAD LA YOUT - Option 1
DIM A A B C D E F G
NOTE:
PAD DIMENSIONS
MILLIMETERS 0.305 0.457 0.203 0.254 0.510 0.990 0.510 INCHES 0.012 0.018 0.008 0.010 0.020 0.039 0.020
DIE SOLDER BUMPS
C
F E
1. Preferred: Using 0.1mm (0.004") stencil.
B
G
SOLDER PADS SOLDER PRINT 0.010" - 0.012" DIA. SOLDER MASK
D
Outline & Dimensions: Rev 0 - 10/02, 06039
05131.R6 4/05
5
www.protekdevices.com
SFC05-4
PACKAGE OUTLINE & DIMENSIONS
MOUNTING PAD LA YOUT - Option 2
PACKAGE DIMENSIONS
DIM A MILLIMETERS 1.499 0.152 NOM 0.510 0.990 0.510 INCHES 0.059 0.006 NOM 0.020 0.039 0.020
A
COPPER CONTACTS 0.009" [0.23] DIA.
B C D E
DIE SOLDER BUMPS
NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx 0.05mm ( 0.002"). 3. Preferred: Using 0.1mm (0.004") stencil. Outline & Dimensions: Rev 0 - 10/02, 06039
D C
E
T APE & REEL ORIENT TION A
B
1
6 5 4
SOLDER PRINT 0.014" [0.36] DIA.
SOLDER MASK
2 3
NOTE: 1. Top view of tape. Solder bumps are face down in tape package. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. 8mm Plastic Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-1 (i.e., SFC05-4-T75-1). 3. 8mm Paper Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-2 (i.e., SFC05-4-T75-2). 4. Suffix - LF = Lead-Free, i.e., SFC05-4-LF-T75-2.
COPYRIGHT (c) ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
05131.R6 4/05
6
www.protekdevices.com


▲Up To Search▲   

 
Price & Availability of SFC05-4

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X