|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Previous Datasheet Index Next Data Sheet DISCRETE POWER DIODES and THYRISTORS DATA BOOK D-302 To Order Previous Datasheet Index Next Data Sheet Bulletin I25160/B ST280CH..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (A-PUK) Extended temperature range 500A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz It 2 case style TO-200AB (A-PUK) Units A C A C A A KA2s KA2s V s C ST280CH..C 500 80 1130 25 7200 7500 260 230 400 to 600 @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical 100 - 40 to 150 D-303 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 ST280CH..C 06 V DRM /V RRM , max. repetitive peak and off-state voltage V 400 600 VRSM , maximum nonrepetitive peak voltage V 500 700 I DRM /I RRM max. @ TJ = TJ max mA 75 On-state Conduction Parameter I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current ST280CH..C 500 (185) 80 (110) 1130 7200 7500 6000 6300 Units Conditions A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms A t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA2s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. 12 I2 t Maximum I2t for fusing 260 235 180 165 I 2 t Maximum I2t for fusing 2600 0.84 t = 0.1 to 10ms, no voltage reapplied (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 rt2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Max (typical) latching current V 0.88 (I > x IT(AV)),TJ = TJ max. (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. m 0.47 1.35 600 mA 1000 (300) T J = 25C, anode supply 12V resistive load V (I > x IT(AV)),TJ = TJ max. 0.50 2222222222222 I = 1000A, TJ = TJ max, t = 10ms sine pulse pk p Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current t t d ST280CH..C 1000 1.0 Units Conditions A/s Gate drive 20V, 20, t 1s TJ = TJ max, anode voltage 80% VDRM Gate current 1A, di /dt = 1A/s g r Typical delay time Typical turn-off time s q V = 0.67% VDRM, TJ = 25C d 100 ITM = 300A, TJ = TJ max, di/dt = 20A/s, VR = 50V dv/dt = 20V/s, Gate 0V 100, t = 500s p D-304 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5- On-state Power Loss Characteristics Fig. 6- On-state Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled D-308 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series Fig. 9 - On-state Voltage Drop Characteristics Fig. 10 - Thermal Impedance Z thJ-hs Characteristics Fig. 11 - Gate Characteristics D-309 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series Blocking Parameter dv/dt IDRM IRRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current ST280CH..C 500 75 Units Conditions V/s mA TJ = TJ max. linear to 80% rated VDRM TJ = TJ max, rated V DRM/V RRM applied Triggering Parameter PGM Maximum peak gate power ST280CH..C 10.0 2.0 3.0 20 Units Conditions W A TJ = TJ max, t p 5ms TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t 5ms p PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage TYP. 180 IGT DC gate current required to trigger 90 30 2.9 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 1.8 1.0 V 5.0 TJ = TJ max, t 5ms p 23 MAX. 150 3.0 10 0.30 mA V TJ = TJ max V mA TJ = - 40C TJ = 25C TJ = 150C TJ = - 40C TJ = 25C TJ = 150C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied Thermal and Mechanical Specification Parameter TJ T stg ST280CH..C -40 to 150 -40 to 150 0.17 0.08 0.033 0.017 4900 (500) Units C Conditions Max. operating temperature range Max. storage temperature range RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10% DC operation single side cooled K/W DC operation double side cooled DC operation single side cooled DC operation double side cooled N (Kg) g See Outline Table K/W wt Approximate weight Case style 50 TO - 200AB (A-PUK) D-3053333 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle 180 120 90 60 30 Sinusoidal conduction Single Side Double Side 0.016 0.019 0.024 0.035 0.060 0.017 0.019 0.024 0.035 0.060 Rectangular conduction Single Side Double Side 0.011 0.019 0.026 0.036 0.060 0.011 0.019 0.026 0.037 0.061 Units Conditions TJ = TJ max. K/W Ordering Information Table Device Code 12 ST 1 28 2 0 3 CH 4 06 5 C 6 1 7 8 1 2 3 4 5 6 7 - Thyristor Essential part number 0 = Converter grade CH = Ceramic Puk, High temperature Voltage code: Code x 100 = VRRM (See Voltage Rating Table) C = Puk Case TO-200AB (A-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 2222222222222 8 - Critical dv/dt: None = 500V/sec (Standard selection) L = 1000V/sec (Special selection) D-306 To Order Previous Datasheet Index Next Data Sheet ST280CH..C Series Outline Table ANODE TO GATE CREEPAGE DISTANCE: 7.62 (0.30) MIN. STRIKE DISTANCE: 7.12 (0.28) MIN. 19 (0.75) DIA. MAX. 0.3 (0.01) MIN. 13.7 / 14.4 (0.54 / 0.57) 0.3 (0.01) MIN. 19 (0.75) DIA. MAX. 38 (1.50) DIA MAX. GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE Case Style TO-200AB (A-PUK) 2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 6.5 (0.26) 4.75 (0.19) All dimensions in millimeters (inches) 23 25 5 42 (1.65) MAX. 28 (1.10) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics D-3073333 To Order |
Price & Availability of ST280CH |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |