 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TFS210C.doc version 1.6 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 210 C 1/5 ______________________________________________________________________________________________________ Measurement Condition Ambient temperature: Input power level: Terminating impedances * Input: Output: 23 C 0 dBm 295 295 || 1,15 pF || 1,15 pF Characteristics Remark: Reference level for the relative attenuation arel of the TFS 210 C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae . The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e. The nominal frequency fN is fixed on 210,38 MHz without tolerance. The given values for the relative attenuation a rel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data Insertion Loss (Reference level) Nominal Frequency 3 dB - Band Width Relative Attenuation fN 0 kHz ... fN 13 fN 13 kHz ... fN 15 fN fN fN fN fN fN 60 60 120 + 420 + 1,25 - 420 kHz kHz ... kHz ... kHz ... MHz ... kHz ... fN fN fN fN fN 120 420 + 1,25 + 2,05 2,05 kHz kHz kHz kHz MHz MHz MHz GDD kHz TCf ** ae = amin fN BW arel typ. Value 6,6 dB 54 23 - 0,036 ppm/K + 25 C 2 Variation/ Limitation max. 8,0 dB 210,38 MHz kHz min. 30 max. 1,5 dB max. 3 dB kHz dB min. min. min. min. min. min. 20 20 40 50 55 60 dB dB dB dB dB dB s Group Delay Distortion fN 0 kHz ... fN 11 max. 9 - Temperature Coefficient of Frequency Frequency Inversion Temperature Operating Temperature Range T0 - 10C ... + 60C *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as **) reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / approved: ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS210C.doc version 1.6 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 210 C 2/5 ______________________________________________________________________________________________________ Construction and Pin Configuration (All dimensions in mm) 1 2 3 4 5 6 7 8 9 10 Output Ground Ground Ground Ground Ground Input Ground Ground Ground S 210 C N32 Datecode Datecode L M N ... Year + week 1999 2000 2001 50 test circuit 1 L1 1 7 L2 C1 C2 2,3,4,5,6,8, 9,10,11,12 50 test circuit 2 C1 1 7 C2 L1 L2 2,3,4,5,6,8, 9,10,11,12 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS210C.doc version 1.6 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 210 C 3/5 ______________________________________________________________________________________________________ Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 1,5 mm or 20g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each. / 10 cycles DIN IEC 68 part 2 14 Test N max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Reel of empty components at start: Reel of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do D1 E F P2 P1 Ao Bo : : : : : : : : : : 16 4 1,5 1,5 0,3 0,1 + 0,5 + 0,5 Ao F W D1 13,4 0,1 3000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Do Po P2 E 1,75 0,1 7,5 0,1 0,6 2 8 1,5 5,5 7,5 0,1 0,1 COVER TAPE Bo G (min) : 0,05 0,1 P1 G D1(min) : W2 Reel (all dimensions in mm): A W1 : W2 (max) : N (min) C : : : 330 16,4 +2 22,4 50 13 + 0,5 / - 0,2 C A N W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS210C.doc version 1.6 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 210 C 4/5 ______________________________________________________________________________________________________ Air reflow Temperature Conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS210C.doc version 1.6 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 210 C 5/5 ______________________________________________________________________________________________________ History Version 1.6 Reason of Changes Add History Add 50 test circuit Correct Tape and reel information Name Herrler Date 09.08.2001 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS210C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |