 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 5VAGCAMPLIFIER+ UPC3219GV VIDEOAMPLIFIER FEATURES * ON-CHIPLOWDISTORTIONAMPLIFIER: IIP3 = -1 dBm at minimuim gain * WIDEAGCDYNAMICRANGE: GCR = 42 dB TYP VOLTAGEGAINvs. AUTOMATICGAINCONTROLVOLTAGE 45 40 Voltage Gain, G (dB) * ON-CHIPVIDEOAMPLIFIER: VOUT = 1.0 VP-P at single-ended output * SUPPLYVOLTAGE: VCC = 5 V 35 30 25 20 15 10 5 0 -5 -10 0 1 2 3 4 5 * PACKAGEDIN8PINSSOPSUITABLEFOR SURFACEMOUNTING APPLICATIONS * * * Digital CATV Cable modem receivers IP Telephony receivers Automatic Gain Control Voltage, VAGC (V) PACKAGEOUTLINES08 8 7 6 5 DESCRIPTION NEC's UPC3219GV is a Silicon Monolithic IC designed for use as an AGC Amplifier for digital CATV, cable modem and IP telephony systems. This IC consists of a two stage gain control amplifier and a fixed gain video amplifier. The device provides a differential input and differential output for noise performance, which eliminates shielding requirements. The package is 8-pin SSOP (Shrink Small Outline Package) suitable for surface mount. This IC is manufactured using NEC's 10 GHz fT NESAT AL silicon bipolar process. This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. N 3221 2 3 3.0 MAX 4 1 All dimensions are typical unless specified otherwise. ELECTRICALCHARACTERISTICS (TA = 25C, VCC = 5 V, ZS = 1K, ZL = 1K, fIN = 45 MHz, single-ended output), unless otherwise noted PARTNUMBER PACKAGEOUTLINE UPC3219GV S08 TYP 35 100 42 0 42 9 1.0 55 MAX 42 45 4 - 10.5 SYMBOLS DC Characteristics ICC RF Characterisitics BW GMAX GMIN GCR NFAGC VOUT IM3 PARAMETERSANDCONDITIONS UNITS mA MHz dB dB dB dB VP-P dBc MIN 28 39 -4 35 - Circuit Current (no input signal) Frequency Bandwidth, VAGC = 3 V1 Maximum Gain , VAGC = 4.5 V Minimum Gain, VAGC = 0.5 V Gain Control Range, VAGC = 0.5 to 4.5 V Noise Figure, VAGC = 4.5 V at MAX Gain Output Voltage, Single Ended Output Third Order Intermodulation Distortion, fIN1 = 44 MHz, fIN2 = 45 MHz, VIN = 30 dBmV per tone2 Note: 1. -3dB with respect to 10 MHz gain 2. VAGC is adjusted to establish VOUT = 1.0 VP-P per tone California Eastern Laboratories UPC3219GV (TA = 25C, unless otherwise specified) SYMBOLS VCC PD TOP1 TSTG PARAMETERS Supply Voltage Power Dissipation2, TA = 85C Operating Ambient Temp. Storage Temperature ABSOLUTEMAXIMUMRATINGS1 UNITS V mW C C RATINGS 6.0 250 -40 to +85 -50 to +150 RECOMMENDED OPERATINGCONDITIONS SYMBOL VCC TA VAGC VIN PARAMETER UNITS MIN TYP MAX V C V dBmV 4.5 -40 0.5 9 5.0 +25 - 5.5 +85 4.5 30 Supply Voltage Operating Ambient Temp.1 Gain Control Voltage Range Video Input Signal Range Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB, with copper Note: 1. VCC = 4.5 to 5.5 V ORDERINGINFORMATION PARTNUMBER UPC3219GV-E1-A QUANTITY 1 kp/reel Note: Embossed tape 8 mm wide. Pin 1 indicates pull-out direction of tape. TYPICALPERFORMANCECURVES (TA = 25C, unless otherwise specified) NOISEFIGUREvs. AUTOMATICGAINCONTROLVOLTAGE Third Order Intermodulation Distortion, IM3, (dBm per tone) 30 THIRDORDER INTERMODULATIONDISTORTIONvs. INPUTVOLTAGE -10 (IM 3 is per tone) f1 = 44 MHz; f2 = 45 MHz -20 V CC = 4 .5 V V OUT = 0 .7 V p-p -30 R L = 1K -40 -50 -60 -70 -80 -90 -100 -40 P3 at -40 C P3 at +25 C P3 at +85 C Noise Figure, NF (dB) 20 10 0 fRF = 45 MHz V CC = 5.0 V R L = 1K 0 1 2 3 4 5 -30 -20 -10 Automatic Gain Control Voltage, VAGC (V) Input Voltage, PIN (dBm per tone) UPC3219GV TYPICALPERFORMANCECURVES,cont. SUPPLYCURRENTvs. SUPPLYVOLTAGE 60 (TA = 25C, unless otherwise specified) INPUTTHIRDORDERINTERCEPTPOINT vs.INPUTPOWER 20 50 40 30 Te = 25C 20 10 0 -10 0 1 2 3 4 5 6 Input Third Order Intercept Point, IIP3 (dBm) Supply Current, ICC (mA) 15 10 5 0 -5 -10 0 5 10 15 20 25 30 35 40 Supply Voltage, VCC (V) Input Power, PIN(dBmV per tone) VOLTAGEGAINvs.FREQUENCY 45 44 2.0 VOLTAGEOUTPUTvs.FREQUENCY Voltage Output, VOUT (V) 0 25 50 75 100 125 150 175 200 225 250 275 43 Voltage Gain, G (dB) 42 41 40 39 38 37 36 35 1.5 1.0 0. 5 0.0 0 25 50 75 100 125 150 175 200 225 250 275 Frequency, f (MHz) VOLTAGEGAINvs. AUTOMATICGAINCONTROL VOLTAGE 45 40 V CC = 5 V 45 40 35 30 25 20 15 10 Te = -40 C Te = +25 C Te = +85 C Te = +25 C 0 1 2 3 4 5 5 0 -5 -10 0 0 12 14 Frequency, f (MHz) NOISEFIGUREvs. FREQUENCY V CC = 4. 5 V V CC = 5 .0 V V CC = 5 .5 V Voltage Gain, VG (dBm) 35 30 25 20 15 10 5 0 -5 -10 Noise Figure, NF (dB) Noise Figure, NF (dB) 10 8 6 4 2 ZL = 250 V AGC = 4. 5 V measurement circuit 2 20 40 60 80 100 Automatic Gain Control Voltage, VAGC (V) Frequency, f (MHz) UPC3219GV SYSTEMAPPLICATIONEXAMPLE V CC 1f Signal Generator 50 S AW F ilter R L = 1 000 1f 10k V AG C 13K 1f 4 AG C C ont. 5 1 1f 2 3 7 6 1f 500 S pectrum Analyz er (50) 8 1f Differential P robe (10:1) 1 M // 7pF EVALUATIONBOARDSCHEMATICANDTEST + - C5 1f C6 1nf V CC DC_Bias UP C 3219G V G ND2 C3 1f R3 953 C4 1f 1K S ignal G enerator 4:1 R1 0 R2 C1 1f C2 1f AG C_ IN1 AG C_ OUT 1 S pectrum Analyz er AG C_ IN2 R5 0 + - 0 10K C7 13k 1f AG C_ OUT 2 V AG C C8 1nf AG C_C ontrol G ND1 PINEXPLANATIONS PinNo. 1 2 Name VCC INPUT1 AppliedVoltage (v) 4.5 to 5.5 PinVoltage (v)1 Description Power supply pin. This pin should be externally equipped with bypass capacitor to minimize ground impedance. InternalEquivalentCircuit 1.45 Signal input pins of AGC amplifier. AGC Control 1 3 INPUT2 1.45 2 5 3 4 VAGC 0 to VCC Gain control pin. This pin's bias govern the AGC output level. Minimuim Gain at VAGC = 0.5 V Maximum Gain at VAGC = 4.5 V Recommended to use by dividing AGC voltage with external resistor (ex. 100k) 1 4 AGC Amp 5 5 GND 2 0 Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. 2.2 Signal output pins of video amplifier 1 6 OUTPUT2 7 OUTPUT1 2.2 7 6 8 8 GND 1 0 Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All ground pins must be connected together with wide ground pattern to decrease impedance difference. Note: 1. PIN is measured at VCC = 5 V UPC3219GV OUTLINEDIMENSIONS(Units in mm) PACKAGEOUTLINES08 Vcc EVALUATIONBOARD 8 7 6 5 Agc_IN1 uPC3219GV Out1 Detail of Lead End N 1 2 3 3.0 MAX 4 +0.10 0.15 -0.05 3 -3 +7 4.940.2 3.20.1 0.870.2 Vagc 1.50.1 1.8 MAX Agc_IN2 Out2 0.10.1 0.65 +0.10 0.3 -0.05 0.50.2 0.575 MAX 0.15 101100 All dimensions are typical unless specified otherwise. EVALUATIONBOARDASSEMBLY INTERNALBLOCKDIAGRAM P1 P2 1 2 3 4 AGC at Cont. 5 6 7 8 C5 C6 R1 T1 R5 C1 R3 C3 R2 C2 C7 C8 J2 C4 R4 J1 Vcc uPC3219GV J3 Agc_IN1 Out1 R7 R4 R3 R6 T1 0603 10K OHM RES ROHM 0603 1K OHM RES ROHM 0603 0 OHM RES ROHM 0603 13K OHM RES ROHM Transformer4:1 Coilcraft Vagc R7 R6 J4 C6, C8 U1 R1,R2,R5 0603 953 OHM RES ROHM 0603 1000pF CAP ROHM IC NEC, UPC3219GV IC NEC Agc_IN2 Out2 C1-C5, C7 0805 1uF CAP ROHM 101100 03/06/2007 |
Price & Availability of UPC3219GV-E1-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |