 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| XCB170 Single Pole OptoMOS(R) Relays Load Voltage Load Current Max RON XCB170 350 100 50 Units V mA Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Description The XCB170 is a 1-Form-B relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. A highly efficient GaAIAs infrared LED controls the optically coupled input. The device is available in small 6-pin dual in line package in standard through hole and surface mount lead bend. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # XCB170 XCB170S XCB170STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration XCB170 Pinout AC/DC Configuration 1 2 3 6 5 4 XCB170 Pinout DC Only Configuration 1 2 3 6 5 4 + Control - Control Do Not Use Load Do Not Use Load + Control - Control Do Not Use + Load - Load Switching Characteristics of Normally Closed (Form B) Devices 10ms CONTROL +90% +10% TOFF + 90% TON DS-XBA170-R2.0 www.clare.com 1 XCB170 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 C +125 C +260 +220 C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Conditions 10ms IL=120mA IL=200mA VL=35OV IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=120mA IF=5mA VR=5V Symbol VL IL IL ILPK RON RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O Min 5 0.4 0.9 Typ 31 10 25 3 0.7 1.2 3 Max 350 100 180 350 50 15 1 5 5 50 1.4 5 10 Units V mA mA mA A ms ms pF pF mA mA V V A pF 2 www.clare.com Rev. 2.0 XCB170 PERFORMANCE DATA* 35 30 Device Count (N) 25 20 15 10 5 0 XCB170 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC XCB170 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 25 20 15 10 5 0 29.09 29.86 30.63 31.40 32.16 32.93 33.70 On-Resistance () XCB170 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) Device Count (N) 1.17 1.19 1.21 1.23 1.25 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) LED Forward Voltage Drop (V) XCB170 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 0.44 0.50 0.56 0.62 0.69 0.75 0.81 LED Current (mA) 25 20 15 10 5 0 XCB170 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 0.44 0.50 0.56 0.62 0.69 0.75 0.81 XCB170 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) Device Count (N) Device Count (N) Device Count (N) 0.67 0.75 0.83 0.91 0.99 1.06 1.14 LED Current (mA) Turn-On (ms) XCB170 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 0.11 0.14 0.17 0.19 0.22 0.25 0.28 Turn-Off (ms) Load Current (mA) XCB170 Typical Load Current vs. Temperature 160 140 0.016 0.014 Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 120 0 -40 XCB170 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 120 100 80 60 40 20 0 Temperature (C) 10mA 5mA -20 0 20 40 60 80 100 Temperature (C) XCB170 Typical Blocking Voltage vs. Temperature 455 Blocking Voltage (VRMS) 450 Turn-On (ms) 445 440 435 430 425 420 -40 -20 0 20 40 60 80 100 Temperature (C) XCB170 Typical Turn-Off vs. Temperature (Load Current = 100mADC) 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) 10mA Turn-Off (ms) 5mA 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 XCB170 Typical Turn-On vs. Temperature (Load Current = 100mADC) IF= 5mA -20 0 20 40 60 80 100 120 Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2.0 www.clare.com 3 XCB170 PERFORMANCE DATA* XCB170 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) Turn-On (ms) XCB170 Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) XCB170 Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 10mA 5mA Turn-Off (ms) 70 60 On-Resistance () 50 40 30 20 10 0 XCB170 Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mA) XCB170 Typical IF for Switch Operation vs. Temperature (Load Current = 50mA) 6.0 LED Current (mA) LED Current (mA) 5.0 4.0 3.0 2.0 1.0 0 XCB170 Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (C) Temperature (C) Temperature (C) 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 XCB170 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC XCB170 Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time Load Current (mA) -4 -3 -2 -1 0 1 2 3 4 Load Current (A) 1s 10s 100s Load Voltage (V) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2.0 XCB170 MECHANICAL DIMENSIONS 6Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 6.350 .127 (.250 .005) 2.540 .127 (.100 .005) 7.620 .127 (.300 .005) 5.080 .127 (.200 .005) 6Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) 1.499 .127 (.059 .005) Dimensions mm (inches) Rev. 2.0 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-XCB170-R2.0 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/26/01 |
Price & Availability of XCB170STR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |