 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data MRFIC0970/D Rev. 0, 07/2002 3.2 V GSM GaAs Integrated Power Amplifier MRFIC0970 (Scale 2:1) Package Information Plastic Package Case 1308 (QFN-20) Ordering Information Device MRFIC0970 Marking 0970 Package QFN-20 The MRFIC0970 is a single supply, RF power amplifier designed for the 2.0 W GSM900 handheld radios. The device is packaged in the QFN-20 package, with exposed backside pad, which allows excellent electrical and thermal performance through a solderable contact. * Target 3.2 V Characteristics: RF Output Power: 34.5 dBm Typical Efficiency: 50% Typical Single Positive Supply Solution Available in Tape and Reel only. R2 Suffix = 2500 Units per 12 mm, 13 inch Reel * * Definitive Data: Motorola reserves the right to change the Production detail specifications as may be required to permit improvements in the design of its product. (c) Motorola, Inc., 2002. All rights reserved. Electrical Characteristics D1 D2 RFin (G1) D3 VG1,2 ABC1,2 VGG1,2 ABC ABC3 VGG3 VG3 GND Vref Figure 1. Functional Block Diagram 1 Electrical Characteristics Table 1. Maximum Ratings Rating Supply Voltage Symbol VD1,2,3, Vabc Vref Pin Pout TC Tstg TJ Value 8.0 5.0 15 38 -40 to 85 -40 to 85 150 Unit V V dBm dBm C C C RF Input Power RF Output Power Operating Case Temperature Range Storage Temperature Range Junction Temperature NOTES: 1. Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics or Recommended Operating Conditions tables. 2 ESD (electrostatic discharge) immunity meets Human Body Model (HBM) 250 V and Machine Model (MM) 60 V. This device is rated Moisture Sensitivity Level (MSL) 1. Additional ESD data available upon request. Table 2. Recommended Operating Conditions Characteristic Supply Voltage Symbol VD1,2,3 Vabc Vref Pin Min 2.8 0 0.04 5.0 Typ Max 5.5 5.5 1.8 10 Unit Vdc V V dBm Input Power 2 MRFIC0970 Technical Data MOTOROLA Electrical Characteristics Table 3. Electrical Specifications (VD1,2,3 = 3.2 V, Vabc = 2.6 V, Pin = 5.0 dBm, Peak measurement at 12.5% duty cycle, 4.6 ms period, TA = 25C, unless otherwise noted.) Characteristic Frequency Range Output Power Power Added Efficiency Minimum Output Power (Vref = 0.04, Vabc = 2.6 V) Power Control Slope (Vref = 0.1 to 1.8 V, Vref = 0.01 V) Bleed thru Power (Pin(fo) -12dBm, Vref = 0.04, Vabc = 10 k load) RF Leakage Current (IDD1 + IDD2 +IDD3, Pin (fo) 5.0 dBm) (Vabc = 10 k load, Vref = 0.04 V) Output Power Switching Speed ( step input of Vref RF Pout within 1.0 dB of final value) Input Return Loss Noise Power in Rx band 925 to 935 MHz 935 to 960 MHz Stability-Spurious Output (Load VSWR 6:1 all phase angles, Adjust VD1, 2&3 for specified power) Load Mismatch Stress (Load VSWR = 10:1 all phase angles, 5 seconds, Adjust VD1, 2&3 for specified power) |S11| NP Pspur -73 -85 -30 dBc Symbol BW Pout PAE Min 880 34.5 50 Typ Max 915 -17 50:1 Unit MHz dBm % dBm RFVrms /Vref -36 dBm - - 35 mA - - 1.0 s dB dBm - - 6.0 No Degradation in Output Power Before & After Test MOTOROLA MRFIC0970 Technical Data 3 Pin Connections 2 Pin Connections D1 20 D2 1 N.C. 2 N.C. 3 N.C. 4 N.C. 5 6 7 8 9 10 S1/ RFin N.C. GND N.C. (G1) 19 18 17 16 15 VG1,2 14 VGG1,2 13 ABC 12 VGG3 11 VG3 D3/ D3/ D3/ D3/ N.C. RF RF RF RF OUT OUT OUT OUT Figure 2. Pin Connections 3 Typical Performance Characteristics 35.6 Pout, OUTPUT POWER (dBm) 35.4 35.2 35 34.8 34.6 34.4 34.2 880 TA = -40C 25C Pin = 5.0 dBm VDD = 3.2 V Vref = 1.8 V 85C 885 890 895 900 905 f, FREQUENCY (MHz) 910 915 Figure 3. Output Power versus Frequency 4 MRFIC0970 Technical Data MOTOROLA Typical Performance Characteristics 38 37.5 Pout, OUTPUT POWER (dBm) VDD = 5.5 V Pin = 5.0 dBm TA = 25C Vref = 1.8 V 3.2 V 37 36.5 36 35.5 35 34.5 34 33.5 880 885 890 2.8 V 895 900 905 f, FREQUNCY (MHz) 910 915 Figure 4. Output Power versus Frequency 65 PAE, POWER ADDED EFFICIENCY (%) 60 TA = -40C 25C 55 Pin = 5.0 dBm VDD = 3.2 V Vref = 1.8 V 885 890 895 900 905 f, FREQUENCY (MHz) 85C 50 45 880 910 915 Figure 5. Power Added Efficiency versus Frequency 65 PAE, POWER ADDED EFFICIENCY (%) 60 55 50 45 40 35 880 Pin = 5.0 dBm TA = 25C Vref = 1.8 V VDD = 2.8 V 3.2 V 5.5 V 885 890 895 900 905 f, FREQUENCY (MHz) 910 915 Figure 6. Power Added Efficiency versus Frequency MOTOROLA MRFIC0970 Technical Data 5 Application Schematic 4 Application Schematic VDD1 1.0 F Ferrite Bead 120 0.1 F 1.0 nF T2 20 1.0 nF 4700 pF 2.7 39 pF 0.01 F RF In 470 12 470 100 pF T3 19 18 17 N.C. 16 15 14 13 12 11 7 8 9 N.C. 10 1.0 nF 1.0 nF 1.0 nF 1.0 nF 0.1 F 680 0.1 F 240 VG3 VG1,2 Vref ABC VDD2 T1 1 2 N.C. 3 N.C. 4 N.C. 5 N.C. 6 T1 = .100 in, Zo = 50 T2 = .275 in, Zo = 50 T3 = .166 in, Zo = 50 T4 = .041 in, Zo = 50 T5 = .420 in, Zo = 50 T4 12.55 nH Coilcraft 1601-10 27 pF VDD3 1.0 nF T5 4700 pF 6.8 pF RF Out 0.1 F 47 F Figure 7. Application Schematic 6 MRFIC0970 Technical Data MOTOROLA Packaging 5 Packaging PIN 1 INDEX AREA 0.1 C 2X A 0.1 C 2X 4 M 0.1 C G 1.0 0.8 1.00 0.75 (0.24) 0.05 0.00 M (0.5) C DETAIL G VIEW ROTATED 90 CLOCKWISE SEATING PLANE 0.05 C 5 4 B 0.1 C A B 16 2.25 1.95 20 DETAIL M PIN 1 INDEX EXPOSED DIE ATTACH PAD 15 1 2.25 1.95 0.1 C A B 11 5 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. THE COMPLETE JEDEC DESIGNATOR FOR THIS PACKAGE IS: HF-PQFP-N. 4. CORNER CHAMFER MAY NOT BE PRESENT. DIMENSIONS OF OPTIONAL FEATURES ARE FOR REFERENCE ONLY. 5. COPLANARITY APPLIES TO LEADS, CORNER LEADS, AND DIE ATTACH PAD. 7. FOR ANVIL SINGULATED QFN PACKAGES, MAXIMUM DRAFT ANGLE IS 12 . 0.5 N 16X 10 6 20X 0.75 0.50 VIEW M-M 20X 0.30 0.18 0.1 0.05 M M CAB C (45 ) (1.19) 0.60 0.24 0.60 0.24 DETAIL N CORNER CONFIGURATION OPTION 20X 0.065 0.015 (0.27) DETAIL N PREFERRED CORNER CONFIGURATION 4 1.1 1.0 0.475 0.425 2X 0.39 0.31 4 DETAIL T BACKSIDE PIN 1 INDEX (90 ) 0.25 R 0.15 DETAIL M PREFERRED BACKSIDE PIN 1 INDEX 2X 0.1 0.0 DETAIL M BACKSIDE PIN 1 INDEX OPTION DETAIL T PREFERRED BACKSIDE PIN 1 INDEX Figure 8. Outline Dimensions for QFN-20 (Case 1308-02, Issue C) MOTOROLA MRFIC0970 Technical Data 7 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217 1-303-675-2140 or 1-800-441-2447 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1, Minami-Azabu Minato-ku, Tokyo 106-8573 Japan 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 TECHNICAL INFORMATION CENTER: 1-800-521-6274 HOME PAGE: http://www.motorola.com/semiconductors Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. iTypicali parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including iTypicalsi must be validated for each customer application by customeris technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. (c) Motorola, Inc. 2002 MRFIC0970/D |
Price & Availability of MRFIC0970
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |